[PATCH V2 1/2] nvmem: prefix all symbols with NVMEM_
Matthias Brugger
matthias.bgg at gmail.com
Tue Aug 30 07:36:03 PDT 2022
On 30/08/2022 15:40, Rafał Miłecki wrote:
> From: Rafał Miłecki <rafal at milecki.pl>
>
> This unifies all NVMEM symbols. They follow one style now.
>
> Signed-off-by: Rafał Miłecki <rafal at milecki.pl>
For the MediaTek part:
Reviewed-by: Matthias Brugger <matthias.bgg at gmail.com>
> ---
> arch/arm/configs/multi_v7_defconfig | 6 +++---
> arch/arm/configs/qcom_defconfig | 2 +-
> arch/arm64/configs/defconfig | 10 +++++-----
> arch/mips/configs/ci20_defconfig | 2 +-
> drivers/cpufreq/Kconfig.arm | 2 +-
> drivers/nvmem/Kconfig | 24 ++++++++++++------------
> drivers/nvmem/Makefile | 24 ++++++++++++------------
> drivers/soc/mediatek/Kconfig | 2 +-
> drivers/thermal/qcom/Kconfig | 2 +-
> 9 files changed, 37 insertions(+), 37 deletions(-)
>
> diff --git a/arch/arm/configs/multi_v7_defconfig b/arch/arm/configs/multi_v7_defconfig
> index b1a25b8c11e7..b61b2e3d116b 100644
> --- a/arch/arm/configs/multi_v7_defconfig
> +++ b/arch/arm/configs/multi_v7_defconfig
> @@ -1188,11 +1188,11 @@ CONFIG_TI_PIPE3=y
> CONFIG_TWL4030_USB=m
> CONFIG_RAS=y
> CONFIG_NVMEM_IMX_OCOTP=y
> -CONFIG_QCOM_QFPROM=y
> -CONFIG_ROCKCHIP_EFUSE=m
> +CONFIG_NVMEM_QCOM_QFPROM=y
> +CONFIG_NVMEM_ROCKCHIP_EFUSE=m
> CONFIG_NVMEM_SUNXI_SID=y
> CONFIG_NVMEM_VF610_OCOTP=y
> -CONFIG_MESON_MX_EFUSE=m
> +CONFIG_NVMEM_MESON_MX_EFUSE=m
> CONFIG_NVMEM_RMEM=m
> CONFIG_FSI=m
> CONFIG_FSI_MASTER_GPIO=m
> diff --git a/arch/arm/configs/qcom_defconfig b/arch/arm/configs/qcom_defconfig
> index 12b82c662359..8e1f13faeee5 100644
> --- a/arch/arm/configs/qcom_defconfig
> +++ b/arch/arm/configs/qcom_defconfig
> @@ -282,7 +282,7 @@ CONFIG_PHY_QCOM_QMP=y
> CONFIG_PHY_QCOM_USB_HS=y
> CONFIG_PHY_QCOM_USB_SNPS_FEMTO_V2=y
> CONFIG_PHY_QCOM_USB_HSIC=y
> -CONFIG_QCOM_QFPROM=y
> +CONFIG_NVMEM_QCOM_QFPROM=y
> CONFIG_INTERCONNECT=y
> CONFIG_INTERCONNECT_QCOM=y
> CONFIG_INTERCONNECT_QCOM_MSM8974=m
> diff --git a/arch/arm64/configs/defconfig b/arch/arm64/configs/defconfig
> index 265454620682..91e58cf59c99 100644
> --- a/arch/arm64/configs/defconfig
> +++ b/arch/arm64/configs/defconfig
> @@ -1238,12 +1238,12 @@ CONFIG_QCOM_L3_PMU=y
> CONFIG_HISI_PMU=y
> CONFIG_NVMEM_IMX_OCOTP=y
> CONFIG_NVMEM_IMX_OCOTP_SCU=y
> -CONFIG_MTK_EFUSE=y
> -CONFIG_QCOM_QFPROM=y
> -CONFIG_ROCKCHIP_EFUSE=y
> +CONFIG_NVMEM_MTK_EFUSE=y
> +CONFIG_NVMEM_QCOM_QFPROM=y
> +CONFIG_NVMEM_ROCKCHIP_EFUSE=y
> CONFIG_NVMEM_SUNXI_SID=y
> -CONFIG_UNIPHIER_EFUSE=y
> -CONFIG_MESON_EFUSE=m
> +CONFIG_NVMEM_UNIPHIER_EFUSE=y
> +CONFIG_NVMEM_MESON_EFUSE=m
> CONFIG_NVMEM_RMEM=m
> CONFIG_NVMEM_LAYERSCAPE_SFP=m
> CONFIG_FPGA=y
> diff --git a/arch/mips/configs/ci20_defconfig b/arch/mips/configs/ci20_defconfig
> index 955b6ac581ab..11f08b6a3013 100644
> --- a/arch/mips/configs/ci20_defconfig
> +++ b/arch/mips/configs/ci20_defconfig
> @@ -143,7 +143,7 @@ CONFIG_MEMORY=y
> CONFIG_JZ4780_NEMC=y
> CONFIG_PWM=y
> CONFIG_PWM_JZ4740=m
> -CONFIG_JZ4780_EFUSE=y
> +CONFIG_NVMEM_JZ4780_EFUSE=y
> CONFIG_JZ4770_PHY=y
> CONFIG_EXT4_FS=y
> # CONFIG_DNOTIFY is not set
> diff --git a/drivers/cpufreq/Kconfig.arm b/drivers/cpufreq/Kconfig.arm
> index 954749afb5fe..82e5de1f6f8c 100644
> --- a/drivers/cpufreq/Kconfig.arm
> +++ b/drivers/cpufreq/Kconfig.arm
> @@ -153,7 +153,7 @@ config ARM_OMAP2PLUS_CPUFREQ
> config ARM_QCOM_CPUFREQ_NVMEM
> tristate "Qualcomm nvmem based CPUFreq"
> depends on ARCH_QCOM
> - depends on QCOM_QFPROM
> + depends on NVMEM_QCOM_QFPROM
> depends on QCOM_SMEM
> select PM_OPP
> help
> diff --git a/drivers/nvmem/Kconfig b/drivers/nvmem/Kconfig
> index bab8a29c9861..691375c13381 100644
> --- a/drivers/nvmem/Kconfig
> +++ b/drivers/nvmem/Kconfig
> @@ -52,7 +52,7 @@ config NVMEM_IMX_OCOTP_SCU
> This is a driver for the SCU On-Chip OTP Controller (OCOTP)
> available on i.MX8 SoCs.
>
> -config JZ4780_EFUSE
> +config NVMEM_JZ4780_EFUSE
> tristate "JZ4780 EFUSE Memory Support"
> depends on MACH_INGENIC || COMPILE_TEST
> depends on HAS_IOMEM
> @@ -96,7 +96,7 @@ config NVMEM_MXS_OCOTP
> This driver can also be built as a module. If so, the module
> will be called nvmem-mxs-ocotp.
>
> -config MTK_EFUSE
> +config NVMEM_MTK_EFUSE
> tristate "Mediatek SoCs EFUSE support"
> depends on ARCH_MEDIATEK || COMPILE_TEST
> depends on HAS_IOMEM
> @@ -107,7 +107,7 @@ config MTK_EFUSE
> This driver can also be built as a module. If so, the module
> will be called efuse-mtk.
>
> -config MICROCHIP_OTPC
> +config NVMEM_MICROCHIP_OTPC
> tristate "Microchip OTPC support"
> depends on ARCH_AT91 || COMPILE_TEST
> help
> @@ -126,7 +126,7 @@ config NVMEM_NINTENDO_OTP
> This driver can also be built as a module. If so, the module
> will be called nvmem-nintendo-otp.
>
> -config QCOM_QFPROM
> +config NVMEM_QCOM_QFPROM
> tristate "QCOM QFPROM Support"
> depends on ARCH_QCOM || COMPILE_TEST
> depends on HAS_IOMEM
> @@ -145,7 +145,7 @@ config NVMEM_SPMI_SDAM
> Qualcomm Technologies, Inc. PMICs. It provides the clients
> an interface to read/write to the SDAM module's shared memory.
>
> -config ROCKCHIP_EFUSE
> +config NVMEM_ROCKCHIP_EFUSE
> tristate "Rockchip eFuse Support"
> depends on ARCH_ROCKCHIP || COMPILE_TEST
> depends on HAS_IOMEM
> @@ -156,7 +156,7 @@ config ROCKCHIP_EFUSE
> This driver can also be built as a module. If so, the module
> will be called nvmem_rockchip_efuse.
>
> -config ROCKCHIP_OTP
> +config NVMEM_ROCKCHIP_OTP
> tristate "Rockchip OTP controller support"
> depends on ARCH_ROCKCHIP || COMPILE_TEST
> depends on HAS_IOMEM
> @@ -199,7 +199,7 @@ config NVMEM_SUNXI_SID
> This driver can also be built as a module. If so, the module
> will be called nvmem_sunxi_sid.
>
> -config UNIPHIER_EFUSE
> +config NVMEM_UNIPHIER_EFUSE
> tristate "UniPhier SoCs eFuse support"
> depends on ARCH_UNIPHIER || COMPILE_TEST
> depends on HAS_IOMEM
> @@ -221,7 +221,7 @@ config NVMEM_VF610_OCOTP
> This driver can also be build as a module. If so, the module will
> be called nvmem-vf610-ocotp.
>
> -config MESON_EFUSE
> +config NVMEM_MESON_EFUSE
> tristate "Amlogic Meson GX eFuse Support"
> depends on (ARCH_MESON || COMPILE_TEST) && MESON_SM
> help
> @@ -231,7 +231,7 @@ config MESON_EFUSE
> This driver can also be built as a module. If so, the module
> will be called nvmem_meson_efuse.
>
> -config MESON_MX_EFUSE
> +config NVMEM_MESON_MX_EFUSE
> tristate "Amlogic Meson6/Meson8/Meson8b eFuse Support"
> depends on ARCH_MESON || COMPILE_TEST
> help
> @@ -251,13 +251,13 @@ config NVMEM_SNVS_LPGPR
> This driver can also be built as a module. If so, the module
> will be called nvmem-snvs-lpgpr.
>
> -config RAVE_SP_EEPROM
> +config NVMEM_RAVE_SP_EEPROM
> tristate "Rave SP EEPROM Support"
> depends on RAVE_SP_CORE
> help
> Say y here to enable Rave SP EEPROM support.
>
> -config SC27XX_EFUSE
> +config NVMEM_SC27XX_EFUSE
> tristate "Spreadtrum SC27XX eFuse Support"
> depends on MFD_SC27XX_PMIC || COMPILE_TEST
> depends on HAS_IOMEM
> @@ -278,7 +278,7 @@ config NVMEM_ZYNQMP
>
> If sure, say yes. If unsure, say no.
>
> -config SPRD_EFUSE
> +config NVMEM_SPRD_EFUSE
> tristate "Spreadtrum SoC eFuse Support"
> depends on ARCH_SPRD || COMPILE_TEST
> depends on HAS_IOMEM
> diff --git a/drivers/nvmem/Makefile b/drivers/nvmem/Makefile
> index 399f9972d45b..7ac988c6966e 100644
> --- a/drivers/nvmem/Makefile
> +++ b/drivers/nvmem/Makefile
> @@ -15,7 +15,7 @@ obj-$(CONFIG_NVMEM_IMX_OCOTP) += nvmem-imx-ocotp.o
> nvmem-imx-ocotp-y := imx-ocotp.o
> obj-$(CONFIG_NVMEM_IMX_OCOTP_SCU) += nvmem-imx-ocotp-scu.o
> nvmem-imx-ocotp-scu-y := imx-ocotp-scu.o
> -obj-$(CONFIG_JZ4780_EFUSE) += nvmem_jz4780_efuse.o
> +obj-$(CONFIG_NVMEM_JZ4780_EFUSE) += nvmem_jz4780_efuse.o
> nvmem_jz4780_efuse-y := jz4780-efuse.o
> obj-$(CONFIG_NVMEM_LPC18XX_EEPROM) += nvmem_lpc18xx_eeprom.o
> nvmem_lpc18xx_eeprom-y := lpc18xx_eeprom.o
> @@ -25,37 +25,37 @@ obj-$(CONFIG_NVMEM_MXS_OCOTP) += nvmem-mxs-ocotp.o
> nvmem-mxs-ocotp-y := mxs-ocotp.o
> obj-$(CONFIG_NVMEM_NINTENDO_OTP) += nvmem-nintendo-otp.o
> nvmem-nintendo-otp-y := nintendo-otp.o
> -obj-$(CONFIG_MTK_EFUSE) += nvmem_mtk-efuse.o
> +obj-$(CONFIG_NVMEM_MTK_EFUSE) += nvmem_mtk-efuse.o
> nvmem_mtk-efuse-y := mtk-efuse.o
> -obj-$(CONFIG_QCOM_QFPROM) += nvmem_qfprom.o
> +obj-$(CONFIG_NVMEM_QCOM_QFPROM) += nvmem_qfprom.o
> nvmem_qfprom-y := qfprom.o
> obj-$(CONFIG_NVMEM_SPMI_SDAM) += nvmem_qcom-spmi-sdam.o
> nvmem_qcom-spmi-sdam-y += qcom-spmi-sdam.o
> -obj-$(CONFIG_ROCKCHIP_EFUSE) += nvmem_rockchip_efuse.o
> +obj-$(CONFIG_NVMEM_ROCKCHIP_EFUSE) += nvmem_rockchip_efuse.o
> nvmem_rockchip_efuse-y := rockchip-efuse.o
> -obj-$(CONFIG_ROCKCHIP_OTP) += nvmem-rockchip-otp.o
> +obj-$(CONFIG_NVMEM_ROCKCHIP_OTP) += nvmem-rockchip-otp.o
> nvmem-rockchip-otp-y := rockchip-otp.o
> obj-$(CONFIG_NVMEM_SUNXI_SID) += nvmem_sunxi_sid.o
> nvmem_stm32_romem-y := stm32-romem.o
> obj-$(CONFIG_NVMEM_STM32_ROMEM) += nvmem_stm32_romem.o
> nvmem_sunxi_sid-y := sunxi_sid.o
> -obj-$(CONFIG_UNIPHIER_EFUSE) += nvmem-uniphier-efuse.o
> +obj-$(CONFIG_NVMEM_UNIPHIER_EFUSE) += nvmem-uniphier-efuse.o
> nvmem-uniphier-efuse-y := uniphier-efuse.o
> obj-$(CONFIG_NVMEM_VF610_OCOTP) += nvmem-vf610-ocotp.o
> nvmem-vf610-ocotp-y := vf610-ocotp.o
> -obj-$(CONFIG_MESON_EFUSE) += nvmem_meson_efuse.o
> +obj-$(CONFIG_NVMEM_MESON_EFUSE) += nvmem_meson_efuse.o
> nvmem_meson_efuse-y := meson-efuse.o
> -obj-$(CONFIG_MESON_MX_EFUSE) += nvmem_meson_mx_efuse.o
> +obj-$(CONFIG_NVMEM_MESON_MX_EFUSE) += nvmem_meson_mx_efuse.o
> nvmem_meson_mx_efuse-y := meson-mx-efuse.o
> obj-$(CONFIG_NVMEM_SNVS_LPGPR) += nvmem_snvs_lpgpr.o
> nvmem_snvs_lpgpr-y := snvs_lpgpr.o
> -obj-$(CONFIG_RAVE_SP_EEPROM) += nvmem-rave-sp-eeprom.o
> +obj-$(CONFIG_NVMEM_RAVE_SP_EEPROM) += nvmem-rave-sp-eeprom.o
> nvmem-rave-sp-eeprom-y := rave-sp-eeprom.o
> -obj-$(CONFIG_SC27XX_EFUSE) += nvmem-sc27xx-efuse.o
> +obj-$(CONFIG_NVMEM_SC27XX_EFUSE) += nvmem-sc27xx-efuse.o
> nvmem-sc27xx-efuse-y := sc27xx-efuse.o
> obj-$(CONFIG_NVMEM_ZYNQMP) += nvmem_zynqmp_nvmem.o
> nvmem_zynqmp_nvmem-y := zynqmp_nvmem.o
> -obj-$(CONFIG_SPRD_EFUSE) += nvmem_sprd_efuse.o
> +obj-$(CONFIG_NVMEM_SPRD_EFUSE) += nvmem_sprd_efuse.o
> nvmem_sprd_efuse-y := sprd-efuse.o
> obj-$(CONFIG_NVMEM_RMEM) += nvmem-rmem.o
> nvmem-rmem-y := rmem.o
> @@ -67,7 +67,7 @@ obj-$(CONFIG_NVMEM_SUNPLUS_OCOTP) += nvmem_sunplus_ocotp.o
> nvmem_sunplus_ocotp-y := sunplus-ocotp.o
> obj-$(CONFIG_NVMEM_APPLE_EFUSES) += nvmem-apple-efuses.o
> nvmem-apple-efuses-y := apple-efuses.o
> -obj-$(CONFIG_MICROCHIP_OTPC) += nvmem-microchip-otpc.o
> +obj-$(CONFIG_NVMEM_MICROCHIP_OTPC) += nvmem-microchip-otpc.o
> nvmem-microchip-otpc-y := microchip-otpc.o
> obj-$(CONFIG_NVMEM_U_BOOT_ENV) += nvmem_u-boot-env.o
> nvmem_u-boot-env-y := u-boot-env.o
> diff --git a/drivers/soc/mediatek/Kconfig b/drivers/soc/mediatek/Kconfig
> index 73e63920b1b9..40d0cc600cae 100644
> --- a/drivers/soc/mediatek/Kconfig
> +++ b/drivers/soc/mediatek/Kconfig
> @@ -77,7 +77,7 @@ config MTK_MMSYS
>
> config MTK_SVS
> tristate "MediaTek Smart Voltage Scaling(SVS)"
> - depends on MTK_EFUSE && NVMEM
> + depends on NVMEM_MTK_EFUSE && NVMEM
> help
> The Smart Voltage Scaling(SVS) engine is a piece of hardware
> which has several controllers(banks) for calculating suitable
> diff --git a/drivers/thermal/qcom/Kconfig b/drivers/thermal/qcom/Kconfig
> index bfd889422dd3..2c7f3f9a26eb 100644
> --- a/drivers/thermal/qcom/Kconfig
> +++ b/drivers/thermal/qcom/Kconfig
> @@ -1,7 +1,7 @@
> # SPDX-License-Identifier: GPL-2.0-only
> config QCOM_TSENS
> tristate "Qualcomm TSENS Temperature Alarm"
> - depends on QCOM_QFPROM
> + depends on NVMEM_QCOM_QFPROM
> depends on ARCH_QCOM || COMPILE_TEST
> help
> This enables the thermal sysfs driver for the TSENS device. It shows
More information about the Linux-mediatek
mailing list