[PATCH v4] regulator: dt-bindings: mediatek: add mt6366
zhiyong.tao
zhiyong.tao at mediatek.com
Sun Aug 28 20:25:22 PDT 2022
On Wed, 2022-08-24 at 16:48 +0300, Krzysztof Kozlowski wrote:
> On 23/08/2022 15:37, Zhiyong Tao wrote:
> > Add mt6366 regulator document
> >
> > Signed-off-by: Zhiyong Tao <zhiyong.tao at mediatek.com>
>
>
https://lore.kernel.org/all/3a26be5c-04c5-cd67-1154-dfd7d99fb5d0@linaro.org/
>
> Where is the driver?
Hi krzysztof,
==>
The driver is included, You can see the file:
https://elixir.bootlin.com/linux/v6.0-rc2/source/drivers/regulator/mt6358-regulator.c
>
> This ended up in spam folder, so you might need to fix up your setup
> just like other folks in Mediatek did.
>
==> we will try to fix it.
> > ---
> > Changes in patch v4:
> > 1)Add unevaluatedProperties in all places
> > 2)Fix check warning and errors
> > 3)remove "compatible="regulator-fixed"" properties for some ldo
> >
> > Changes in patch v3:
> > 1)change patch title
> > 2)change "regulator.yaml#" to regulator.yaml#
> > 3)remove regulator-name
> > 4)fix 4 space for DTS example
> >
> > Changes in patch v2:
> > 1)fix patch title description.
> > 2)fix patch maintainer description.
> > 3)won't cc to srv_heupstream at mediatek.com
> > 4)fix patch commit message description.
> > 5)add properties node and compatible
> > 6)put "unevaluatedProperties: false" after $ref
> > 7)remove underscores in node names.
> > 8)change Filename to "mediatek,mt6366-regulator.yaml"
> > [Zhiyong Tao <zhiyong.tao at mediatek.com>]
> > ---
> > ---
> > .../regulator/mediatek,mt6366-regulator.yaml | 279
> > ++++++++++++++++++
> > 1 file changed, 279 insertions(+)
> > create mode 100644
> > Documentation/devicetree/bindings/regulator/mediatek,mt6366-
> > regulator.yaml
> >
> > diff --git
> > a/Documentation/devicetree/bindings/regulator/mediatek,mt6366-
> > regulator.yaml
> > b/Documentation/devicetree/bindings/regulator/mediatek,mt6366-
> > regulator.yaml
> > new file mode 100644
> > index 000000000000..8945bf20b574
> > --- /dev/null
> > +++ b/Documentation/devicetree/bindings/regulator/mediatek,mt6366-
> > regulator.yaml
> > @@ -0,0 +1,279 @@
> > +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
> > +%YAML 1.2
> > +---
> > +$id:
> > https://urldefense.com/v3/__http://devicetree.org/schemas/regulator/mediatek,mt6366-regulator.yaml*__;Iw!!CTRNKA9wMg0ARbw!zfqocy5mKWyTKAejVLu3IZvaIy0NqTGM5T_myKrjADh1JovpafcfAhyTtLOTDhh6fpI$
> >
> > +$schema:
> > https://urldefense.com/v3/__http://devicetree.org/meta-schemas/core.yaml*__;Iw!!CTRNKA9wMg0ARbw!zfqocy5mKWyTKAejVLu3IZvaIy0NqTGM5T_myKrjADh1JovpafcfAhyTtLOT82kIons$
> >
> > +
> > +title: MT6366 Regulator from MediaTek Integrated
> > +
> > +maintainers:
> > + - Zhiyong Tao <zhiyong.tao at mediatek.com>
> > +
> > +description: |
> > + List of regulators provided by this controller. It is named
> > + according to its regulator type, buck_<name> and ldo_<name>.
> > + MT6366 regulators node should be sub node of the MT6397 MFD
> > node.
> > +
> > +properties:
> > + compatible:
> > + const: mediatek,mt6366-regulator
>
> This looks incomplete. How does it bind? Further pieces also suggest
> you
> send something incomplete.
==>
The project dts file(such as 8186-evb.dts) will add the compatible.
The project dts file is examining.
>
> > +
> > + regulators:
> > + type: object
> > + description: List of regulators and its properties
> > +
> > + patternProperties:
> > + "^buck-
> > v(dram1|core|coresshub|proc11|proc12|gpu|s2|modem|s1)$":
> > + type: object
> > + $ref: regulator.yaml#
> > + unevaluatedProperties: false
> > +
> > + "^ldo-v(dram2|sim1|ibr|rf12|usb|camio|camd|cn18|fe28)$":
> > + type: object
> > + $ref: regulator.yaml#
> > + unevaluatedProperties: false
> > +
> > + "^ldo-v(xo22|efuse|mch|vcama1|emc|a12|vcama2|mc)$":
> > + type: object
> > + $ref: regulator.yaml#
> > + unevaluatedProperties: false
> > +
> > + "^buck-(vcore)-sshub$":
> > + type: object
> > + $ref: regulator.yaml#
> > + unevaluatedProperties: false
> > +
> > + "^ldo-vcn(28|33)-bt$":
> > + type: object
> > + $ref: regulator.yaml#
> > + unevaluatedProperties: false
> > +
> > + "^ldo-vcn(33)-wifi$":
> > + type: object
> > + $ref: regulator.yaml#
> > + unevaluatedProperties: false
> > +
> > + "^ldo-vsram-(others)-sshub$":
> > + type: object
> > + $ref: regulator.yaml#
> > + unevaluatedProperties: false
> > +
> > + "^ldo-vsram-(proc11|others|gpu|proc12)$":
> > + type: object
> > + $ref: regulator.yaml#
> > + unevaluatedProperties: false
> > +
> > + "^ldo-v(aud|bif|io|ldo)28$":
> > + type: object
> > + $ref: regulator.yaml#
> > + unevaluatedProperties: false
> > +
> > + "^ldo-v(io|aux|rf)18$":
> > + type: object
> > + $ref: regulator.yaml#
> > + unevaluatedProperties: false
> > +
> > + "^ldo-vsim[2]$":
>
> I have now doubts whether you define generic regulators or quite
> specific regulators you have on your board... Are the names used in
> the
> device datasheet in register API description?
==>yes, the names is used in the device datasheet in register API
description. We will add the regulator-name on project dts.
>
>
> > + type: object
> > + $ref: regulator.yaml#
> > + unevaluatedProperties: false
> > +
> > +required:
> > + - compatible
> > + - regulators
> > +
> > +additionalProperties: false
> > +
> > +examples:
> > + - |
> > + pmic {
> > + compatible = "mediatek,mt6366-regulator";
> > +
> > + regulators {
> > + mt6366_vdram1_reg: buck-vdram1 {
>
> Drop the labels here and further. Why you do not have here any
> regular
> constraints like min/max voltage?
we will add properties min/max voltag on project dts file.
>
> > + regulator-ramp-delay = <12500>;
> > + regulator-enable-ramp-delay = <0>;
> > + regulator-allowed-modes = <0 1>;
>
> Where do you explain the meaning of modes?
support pwm mode.
>
> > + };
> > +
> > + mt6366_vcore_reg: buck-vcore {
> > + regulator-ramp-delay = <6250>;
> > + regulator-enable-ramp-delay = <200>;
> > + regulator-allowed-modes = <0 1>;
> > + };
> > +
> > + mt6366_vproc11_reg: buck-vproc11 {
> > + regulator-ramp-delay = <6250>;
> > + regulator-enable-ramp-delay = <200>;
> > + regulator-allowed-modes = <0 1>;
> > + };
> > +
> > + mt6366_vproc12_reg: buck-vproc12 {
> > + regulator-ramp-delay = <6250>;
> > + regulator-enable-ramp-delay = <200>;
> > + regulator-allowed-modes = <0 1>;
> > + };
> > +
> > + mt6366_vgpu_reg: buck-vgpu {
> > + regulator-ramp-delay = <6250>;
> > + regulator-enable-ramp-delay = <200>;
> > + regulator-allowed-modes = <0 1>;
> > + };
> > +
> > + mt6366_vs2_reg: buck-vs2 {
> > + regulator-ramp-delay = <12500>;
> > + regulator-enable-ramp-delay = <0>;
> > + };
> > +
> > + mt6366_vmodem_reg: buck-vmodem {
> > + regulator-ramp-delay = <6250>;
> > + regulator-enable-ramp-delay = <900>;
> > + regulator-allowed-modes = <0 1>;
> > + };
> > +
> > + mt6366_vs1_reg: buck-vs1 {
> > + regulator-ramp-delay = <12500>;
> > + regulator-enable-ramp-delay = <0>;
> > + };
> > +
> > + mt6366_vdram2_reg: ldo-vdram2 {
> > + regulator-enable-ramp-delay = <3300>;
> > + };
> > +
> > + mt6366_vsim1_reg: ldo-vsim1 {
> > + regulator-enable-ramp-delay = <540>;
> > + };
> > +
> > + mt6366_vibr_reg: ldo-vibr {
> > + regulator-enable-ramp-delay = <60>;
> > + };
> > +
> > + mt6366_vrf12_reg: ldo-vrf12 {
> > + regulator-enable-ramp-delay = <120>;
> > + };
> > +
> > + mt6366_vio18_reg: ldo-vio18 {
> > + regulator-enable-ramp-delay = <2700>;
> > + };
> > +
> > + mt6366_vusb_reg: ldo-vusb {
> > + regulator-name = "vusb";
> > + regulator-enable-ramp-delay = <270>;
> > + };
> > +
> > + mt6366_vcamio_reg: ldo-vcamio {
> > + regulator-enable-ramp-delay = <325>;
> > + };
> > +
> > + mt6366_vcamd_reg: ldo-vcamd {
> > + regulator-enable-ramp-delay = <325>;
> > + };
> > +
> > + mt6366_vcn18_reg: ldo-vcn18 {
> > + regulator-enable-ramp-delay = <270>;
> > + };
> > +
> > + mt6366_vfe28_reg: ldo-vfe28 {
> > + regulator-enable-ramp-delay = <270>;
> > + };
> > +
> > + mt6366_vsram_proc11_reg: ldo-vsram-proc11 {
> > + regulator-ramp-delay = <6250>;
> > + regulator-enable-ramp-delay = <240>;
> > + };
> > +
> > + mt6366_vcn28_reg: ldo-vcn28 {
> > + regulator-enable-ramp-delay = <270>;
> > + };
> > +
> > + mt6366_vsram_others_reg: ldo-vsram-others {
> > + regulator-ramp-delay = <6250>;
> > + regulator-enable-ramp-delay = <240>;
> > + };
> > +
> > + mt6366_vsram_gpu_reg: ldo-vsram-gpu {
> > + regulator-ramp-delay = <6250>;
> > + regulator-enable-ramp-delay = <240>;
> > + };
> > +
> > + mt6366_vxo22_reg: ldo-vxo22 {
> > + regulator-enable-ramp-delay = <120>;
> > + };
> > +
> > + mt6366_vefuse_reg: ldo-vefuse {
> > + regulator-enable-ramp-delay = <270>;
> > + };
> > +
> > + mt6366_vaux18_reg: ldo-vaux18 {
> > + regulator-enable-ramp-delay = <270>;
> > + };
> > +
> > + mt6366_vmch_reg: ldo-vmch {
> > + regulator-enable-ramp-delay = <60>;
> > + };
> > +
> > + mt6366_vbif28_reg: ldo-vbif28 {
> > + regulator-enable-ramp-delay = <270>;
> > + };
> > +
> > + mt6366_vsram_proc12_reg: ldo-vsram-proc12 {
> > + regulator-ramp-delay = <6250>;
> > + regulator-enable-ramp-delay = <240>;
> > + };
> > +
> > + mt6366_vcama1_reg: ldo-vcama1 {
> > + regulator-enable-ramp-delay = <325>;
> > + };
> > +
> > + mt6366_vemc_reg: ldo-vemc {
> > + regulator-enable-ramp-delay = <60>;
> > + };
> > +
> > + mt6366_vio28_reg: ldo-vio28 {
> > + regulator-enable-ramp-delay = <270>;
> > + };
> > +
> > + mt6366_va12_reg: ldo-va12 {
> > + regulator-enable-ramp-delay = <270>;
> > + };
> > +
> > + mt6366_vrf18_reg: ldo-vrf18 {
> > + regulator-enable-ramp-delay = <120>;
> > + };
> > +
> > + mt6366_vcn33_bt_reg: ldo-vcn33-bt {
> > + regulator-enable-ramp-delay = <270>;
> > + };
> > +
> > + mt6366_vcn33_wifi_reg: ldo-vcn33-wifi {
> > + regulator-enable-ramp-delay = <270>;
> > + };
> > +
> > + mt6366_vcama2_reg: ldo-vcama2 {
> > + regulator-enable-ramp-delay = <325>;
> > + };
> > +
> > + mt6366_vmc_reg: ldo-vmc {
> > + regulator-enable-ramp-delay = <60>;
> > + };
> > +
> > + mt6366_vldo28_reg: ldo-vldo28 {
> > + regulator-enable-ramp-delay = <270>;
> > + };
> > +
> > + mt6366_vaud28_reg: ldo-vaud28 {
> > + regulator-enable-ramp-delay = <270>;
> > + };
> > +
> > + mt6366_vsim2_reg: ldo-vsim2 {
> > + regulator-enable-ramp-delay = <540>;
> > + };
> > +
> > + mt6366_vcore_sshub_reg: buck-vcore-sshub {
>
> Empty node? What does it do?
just define here, we will add properties on project dts file.
Thanks
>
>
>
> Best regards,
> Krzysztof
More information about the Linux-mediatek
mailing list