[PATCH v2 4/4] thermal: mediatek: add another get_temp ops for thermal sensors
Amjad Ouled-Ameur
aouledameur at baylibre.com
Fri Aug 26 07:12:19 PDT 2022
Hi Christophe,
On 7/20/22 20:54, Christophe JAILLET wrote:
> Le 20/07/2022 à 20:18, Amjad Ouled-Ameur a écrit :
>> Provide thermal zone to read thermal sensor in the SoC. We can read
>> all the
>> thermal sensors value in the SoC by the node /sys/class/thermal/
>>
>> In mtk_thermal_bank_temperature, return -EAGAIN instead of -EACCESS
>> on the first read of sensor that often are bogus values.
>> This can avoid following warning on boot:
>>
>> thermal thermal_zone6: failed to read out thermal zone (-13)
>>
>> Signed-off-by: default avatarMichael Kao
>> <michael.kao-NuS5LvNUpcJWk0Htik3J/w at public.gmane.org>
>> Signed-off-by: default avatarHsin-Yi Wang
>> <hsinyi-F7+t8E8rja9g9hUCZPvPmw at public.gmane.org>
>> Signed-off-by: Amjad Ouled-Ameur
>> <aouledameur-rdvid1DuHRBWk0Htik3J/w at public.gmane.org>
>> Tested-by: Amjad Ouled-Ameur
>> <aouledameur-rdvid1DuHRBWk0Htik3J/w at public.gmane.org>
>> ---
>> drivers/thermal/mtk_thermal.c | 100 ++++++++++++++++++++++++++--------
>> 1 file changed, 76 insertions(+), 24 deletions(-)
>>
>> diff --git a/drivers/thermal/mtk_thermal.c
>> b/drivers/thermal/mtk_thermal.c
>> index 1dc276f8c4f1..79b14ce1a08d 100644
>> --- a/drivers/thermal/mtk_thermal.c
>> +++ b/drivers/thermal/mtk_thermal.c
>> @@ -259,6 +259,11 @@ enum mtk_thermal_version {
>> struct mtk_thermal;
>> +struct mtk_thermal_zone {
>> + struct mtk_thermal *mt;
>> + int id;
>> +};
>> +
>> struct thermal_bank_cfg {
>> unsigned int num_sensors;
>> const int *sensors;
>> @@ -709,6 +714,32 @@ static void mtk_thermal_put_bank(struct
>> mtk_thermal_bank *bank)
>> mutex_unlock(&mt->lock);
>> }
>> +static u32 _get_sensor_temp(struct mtk_thermal *mt, int id)
>> +{
>> + u32 raw;
>> + int temp;
>> +
>> + const struct mtk_thermal_data *conf = mt->conf;
>> +
>> + raw = readl(mt->thermal_base + conf->msr[id]);
>> +
>> + if (mt->conf->version == MTK_THERMAL_V1)
>> + temp = raw_to_mcelsius_v1(mt, id, raw);
>> + else
>> + temp = raw_to_mcelsius_v2(mt, id, raw);
>> +
>> + /*
>> + * The first read of a sensor often contains very high bogus
>> + * temperature value. Filter these out so that the system does
>> + * not immediately shut down.
>> + */
>> +
>> + if (temp > 200000)
>> + return -EAGAIN;
>
> This function returns a u32. Is it ok to return -EAGAIN?
>
_get_sensor_temp() should normally return int instead u32, will fix it
in V3.
> There is also 2 spaces here...
>
>> + else
>> + return temp;
>
> ... and a tab here.
>
will fix them in V3.
>> +}
>> +
>> /**
>> * mtk_thermal_bank_temperature - get the temperature of a bank
>> * @bank: The bank
>> @@ -721,26 +752,9 @@ static int mtk_thermal_bank_temperature(struct
>> mtk_thermal_bank *bank)
>> struct mtk_thermal *mt = bank->mt;
>> const struct mtk_thermal_data *conf = mt->conf;
>> int i, temp = INT_MIN, max = INT_MIN;
>> - u32 raw;
>> for (i = 0; i < conf->bank_data[bank->id].num_sensors; i++) {
>> - raw = readl(mt->thermal_base + conf->msr[i]);
>> -
>> - if (mt->conf->version == MTK_THERMAL_V1) {
>> - temp = raw_to_mcelsius_v1(
>> - mt, conf->bank_data[bank->id].sensors[i], raw);
>> - } else {
>> - temp = raw_to_mcelsius_v2(
>> - mt, conf->bank_data[bank->id].sensors[i], raw);
>> - }
>> -
>> - /*
>> - * The first read of a sensor often contains very high bogus
>> - * temperature value. Filter these out so that the system does
>> - * not immediately shut down.
>> - */
>> - if (temp > 200000)
>> - temp = 0;
>> + temp = _get_sensor_temp(mt, i);
>
> Is it ok if _get_sensor_temp() returns -EAGAIN?
>
drivers/thermal/thermal_core.c:update_temperature() checks for -EAGAIN
after
thermal_zone_get_temp() is called, thus, I think it's good to return
-EAGAIN in
case of failure.
>> if (temp > max)
>> max = temp;
>> @@ -751,7 +765,8 @@ static int mtk_thermal_bank_temperature(struct
>> mtk_thermal_bank *bank)
>> static int mtk_read_temp(void *data, int *temperature)
>> {
>> - struct mtk_thermal *mt = data;
>> + struct mtk_thermal_zone *tz = data;
>> + struct mtk_thermal *mt = tz->mt;
>> int i;
>> int tempmax = INT_MIN;
>> @@ -770,10 +785,28 @@ static int mtk_read_temp(void *data, int
>> *temperature)
>> return 0;
>> }
>> +static int mtk_read_sensor_temp(void *data, int *temperature)
>> +{
>> + struct mtk_thermal_zone *tz = data;
>> + struct mtk_thermal *mt = tz->mt;
>> + int id = tz->id - 1;
>> +
>> + if (id < 0)
>> + return -EACCES;
>
> 2 spaces.
>
will fix it in V3.
>> +
>> + *temperature = _get_sensor_temp(mt, id);
>
> If _get_sensor_temp() returns -EAGAIN, should this be propagated to
> the caller?
>
>> +
>> + return 0;
>> +}
>> +
>> static const struct thermal_zone_of_device_ops mtk_thermal_ops = {
>> .get_temp = mtk_read_temp,
>> };
>> +static const struct thermal_zone_of_device_ops
>> mtk_thermal_sensor_ops = {
>> + .get_temp = mtk_read_sensor_temp,
>> +};
>> +
>> static void mtk_thermal_init_bank(struct mtk_thermal *mt, int num,
>> u32 apmixed_phys_base, u32 auxadc_phys_base,
>> int ctrl_id)
>> @@ -1072,6 +1105,7 @@ static int mtk_thermal_probe(struct
>> platform_device *pdev)
>> u64 auxadc_phys_base, apmixed_phys_base;
>> struct thermal_zone_device *tzdev;
>> void __iomem *apmixed_base, *auxadc_base;
>> + struct mtk_thermal_zone *tz;
>> mt = devm_kzalloc(&pdev->dev, sizeof(*mt), GFP_KERNEL);
>> if (!mt)
>> @@ -1161,11 +1195,29 @@ static int mtk_thermal_probe(struct
>> platform_device *pdev)
>> platform_set_drvdata(pdev, mt);
>> - tzdev = devm_thermal_zone_of_sensor_register(&pdev->dev, 0, mt,
>> - &mtk_thermal_ops);
>> - if (IS_ERR(tzdev)) {
>> - ret = PTR_ERR(tzdev);
>> - goto err_disable_clk_peri_therm;
>> + for (i = 0; i < mt->conf->num_sensors + 1; i++) {
>> + tz = kmalloc(sizeof(*tz), GFP_KERNEL);
>
> Should this memory allocation be a devm_kmalloc(), or is this memory
> freed at some point by the framework?
>
> (I don't know the thermal_zone API and the patch has no kfree())
AFAIK, thermal API does not free private data, therefore devm_kmalloc()
should be used.
>
> CJ
>
>> + if (!tz)
>> + return -ENOMEM;
>> +
>> + tz->mt = mt;
>> + tz->id = i;
>> +
>> + tzdev = devm_thermal_zone_of_sensor_register(&pdev->dev, i,
>> tz, (i == 0) ?
>> + &mtk_thermal_ops :
>> + &mtk_thermal_sensor_ops);
>> +
>> + if (IS_ERR(tzdev)) {
>> + if (PTR_ERR(tzdev) == -ENODEV) {
>> + dev_warn(&pdev->dev,
>> + "sensor %d not registered in thermal zone in
>> dt\n", i);
>> + continue;
>> + }
>> + if (PTR_ERR(tzdev) == -EACCES) {
>> + ret = PTR_ERR(tzdev);
>> + goto err_disable_clk_peri_therm;
>> + }
>> + }
>> }
>> ret = devm_thermal_add_hwmon_sysfs(tzdev);
>
Thank you Christophe for the review.
Regards,
Amjad
More information about the Linux-mediatek
mailing list