[PATCH 4/4] net: mediatek: sgmii: set the speed according to the phy interface in AN

Russell King (Oracle) linux at armlinux.org.uk
Tue Aug 23 08:27:11 PDT 2022


On Sun, Aug 21, 2022 at 12:45:38AM +0200, Alexander Couzens wrote:
> The non auto-negotiating code path is setting the correct speed for the
> interface. Ensure auto-negotiation code path is doing it as well.
> 
> Signed-off-by: Alexander Couzens <lynxis at fe80.eu>
> ---
>  drivers/net/ethernet/mediatek/mtk_sgmii.c | 11 +++++++++--
>  1 file changed, 9 insertions(+), 2 deletions(-)
> 
> diff --git a/drivers/net/ethernet/mediatek/mtk_sgmii.c b/drivers/net/ethernet/mediatek/mtk_sgmii.c
> index aa69baf1a42f..75de2c73a048 100644
> --- a/drivers/net/ethernet/mediatek/mtk_sgmii.c
> +++ b/drivers/net/ethernet/mediatek/mtk_sgmii.c
> @@ -21,13 +21,20 @@ static struct mtk_pcs *pcs_to_mtk_pcs(struct phylink_pcs *pcs)
>  }
>  
>  /* For SGMII interface mode */
> -static int mtk_pcs_setup_mode_an(struct mtk_pcs *mpcs)
> +static int mtk_pcs_setup_mode_an(struct mtk_pcs *mpcs, phy_interface_t interface)
>  {
>  	unsigned int val;
>  
>  	/* PHYA power down */
>  	regmap_write(mpcs->regmap, SGMSYS_QPHY_PWR_STATE_CTRL, SGMII_PHYA_PWD);
>  
> +	/* Set SGMII phy speed */
> +	regmap_read(mpcs->regmap, mpcs->ana_rgc3, &val);
> +	val &= ~RG_PHY_SPEED_MASK;
> +	if (interface == PHY_INTERFACE_MODE_2500BASEX)
> +		val |= RG_PHY_SPEED_3_125G;
> +	regmap_write(mpcs->regmap, mpcs->ana_rgc3, val);
> +

It looks to me like, after this commit, the initial part of
mtk_pcs_setup_mode_an() and mtk_pcs_setup_mode_force() are identical.
Also, I think that the tail of each of these functions is also
identical.

So, would it make sense for a final patch to tidy this code up?

>  	/* Setup the link timer and QPHY power up inside SGMIISYS */
>  	regmap_write(mpcs->regmap, SGMSYS_PCS_LINK_TIMER,
>  		     SGMII_LINK_TIMER_DEFAULT);
> @@ -100,7 +107,7 @@ static int mtk_pcs_config(struct phylink_pcs *pcs, unsigned int mode,
>  	if (interface != PHY_INTERFACE_MODE_SGMII)
>  		err = mtk_pcs_setup_mode_force(mpcs, interface);
>  	else if (phylink_autoneg_inband(mode))
> -		err = mtk_pcs_setup_mode_an(mpcs);
> +		err = mtk_pcs_setup_mode_an(mpcs, interface);

What is the situation when PHY_INTERFACE_MODE_SGMII is being used, but
we're not using inband mode? Right now, we don't do any configuration
of this block, and that seems rather wrong.

-- 
RMK's Patch system: https://www.armlinux.org.uk/developer/patches/
FTTP is here! 40Mbps down 10Mbps up. Decent connectivity at last!



More information about the Linux-mediatek mailing list