[PATCH v3] dt-bindings: pinctrl: mt8186: Fix 'reg-names' for pinctrl nodes

[Allen-KH Cheng]

The mt8186 contains 8 GPIO physical address bases that correspond to
the 'reg-names' of the pinctrl driver. The 'reg-names' entries in
bindings are ordered incorrectly, though. The system crashes due of an
erroneous address when the regulator initializes.

We fix the 'reg-names' for the pinctrl nodes and the pinctrl-mt8186
example in bindings.

Fixes: 338e953f1bd1 ("dt-bindings: pinctrl: mt8186: add pinctrl file and binding document")
Co-developed-by: Guodong Liu <guodong.liu at mediatek.com>
Signed-off-by: Guodong Liu <guodong.liu at mediatek.com>
Signed-off-by: Allen-KH Cheng <allen-kh.cheng at mediatek.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski at linaro.org>
Reviewed-by: Nícolas F. R. A. Prado <nfraprado at collabora.com>
---
Change in v2:
  * Remove changes of the formatting of addresses and add C-d-b tag for
    Guodong
Change in v1:
  * Capitalize First Letter of Sentences and rephrase the commit message
    [Allen-KH Cheng <allen-kh.cheng at mediatek.com>]
---
---
 .../bindings/pinctrl/pinctrl-mt8186.yaml           | 14 +++++++-------
 1 file changed, 7 insertions(+), 7 deletions(-)

diff --git a/Documentation/devicetree/bindings/pinctrl/pinctrl-mt8186.yaml b/Documentation/devicetree/bindings/pinctrl/pinctrl-mt8186.yaml
index 1eeb885ce0c6..26573a793b57 100644
--- a/Documentation/devicetree/bindings/pinctrl/pinctrl-mt8186.yaml
+++ b/Documentation/devicetree/bindings/pinctrl/pinctrl-mt8186.yaml
@@ -41,12 +41,12 @@ properties:
       Gpio base register names.
     items:
       - const: iocfg0
-      - const: iocfg_bm
-      - const: iocfg_bl
-      - const: iocfg_br
+      - const: iocfg_lt
       - const: iocfg_lm
+      - const: iocfg_lb
+      - const: iocfg_bl
       - const: iocfg_rb
-      - const: iocfg_tl
+      - const: iocfg_rt
       - const: eint
 
   interrupt-controller: true
@@ -235,9 +235,9 @@ examples:
             <0x10002A00 0x0200>,
             <0x10002c00 0x0200>,
             <0x1000b000 0x1000>;
-      reg-names = "iocfg0", "iocfg_bm", "iocfg_bl",
-                  "iocfg_br", "iocfg_lm", "iocfg_rb",
-                  "iocfg_tl", "eint";
+      reg-names = "iocfg0", "iocfg_lt", "iocfg_lm",
+                  "iocfg_lb", "iocfg_bl", "iocfg_rb",
+                  "iocfg_rt", "eint";
       gpio-controller;
       #gpio-cells = <2>;
       gpio-ranges = <&pio 0 0 185>;
-- 
2.18.0