[PATCH 5/7] phy: phy-mtk-tphy: disable gpio mode for all usb2 phys

[Chunfeng Yun]

Disable DP/DM's GPIO mode for all usb2 phy, not only for the first
usb2 phy which usually supports dual-role mode.

Signed-off-by: Chunfeng Yun <chunfeng.yun at mediatek.com>
---
 drivers/phy/mediatek/phy-mtk-tphy.c | 3 +--
 1 file changed, 1 insertion(+), 2 deletions(-)

diff --git a/drivers/phy/mediatek/phy-mtk-tphy.c b/drivers/phy/mediatek/phy-mtk-tphy.c
index 7f40b8b052bd..79920c066e59 100644
--- a/drivers/phy/mediatek/phy-mtk-tphy.c
+++ b/drivers/phy/mediatek/phy-mtk-tphy.c
@@ -532,8 +532,7 @@ static void u2_phy_instance_init(struct mtk_tphy *tphy,
 	/* disable switch 100uA current to SSUSB */
 	mtk_phy_clear_bits(com + U3P_USBPHYACR5, PA5_RG_U2_HS_100U_U3_EN);
 
-	if (!index)
-		mtk_phy_clear_bits(com + U3P_U2PHYACR4, P2C_U2_GPIO_CTR_MSK);
+	mtk_phy_clear_bits(com + U3P_U2PHYACR4, P2C_U2_GPIO_CTR_MSK);
 
 	if (tphy->pdata->avoid_rx_sen_degradation) {
 		if (!index) {
-- 
2.25.1