[PATCH v3 09/15] iio: adc: at91-sama5d2_adc: convert to device properties

[Claudiu.Beznea at microchip.com]

On 06.08.2022 21:49, Jonathan Cameron wrote:
> EXTERNAL EMAIL: Do not click links or open attachments unless you know the content is safe
> 
> On Mon, 18 Jul 2022 05:21:47 +0000
> <Claudiu.Beznea at microchip.com> wrote:
> 
>> On 15.07.2022 15:28, Nuno Sá wrote:
>>> EXTERNAL EMAIL: Do not click links or open attachments unless you know the content is safe
>>>
>>> Make the conversion to firmware agnostic device properties. As part of
>>> the conversion the IIO inkern interface 'of_xlate()' is also converted to
>>> 'fwnode_xlate()'. The goal is to completely drop 'of_xlate' and hence OF
>>> dependencies from IIO.
>>>
>>> Signed-off-by: Nuno Sá <nuno.sa at analog.com>
>>> Reviewed-by: Andy Shevchenko <andy.shevchenko at gmail.com>
>>
>> Reviewed-by: Claudiu Beznea <claudiu.beznea at microchip.com>
>>
> 
> Hi Nuno / Claudiu
> 
> Lots of fuzz on this one because of Claudiu's series that I took whilst this was under review
> I haven't really checked the result of forcing it in but please take a look at the
> testing branch of iio.git for anything silly that happened.

Looks good to me.

Thank you,
Claudiu Beznea

> 
> Jonathan
> 
>>
>>> ---
>>>  drivers/iio/adc/at91-sama5d2_adc.c | 30 +++++++++++++++---------------
>>>  1 file changed, 15 insertions(+), 15 deletions(-)
>>>
>>> diff --git a/drivers/iio/adc/at91-sama5d2_adc.c b/drivers/iio/adc/at91-sama5d2_adc.c
>>> index fe3131c9593c..df716584c117 100644
>>> --- a/drivers/iio/adc/at91-sama5d2_adc.c
>>> +++ b/drivers/iio/adc/at91-sama5d2_adc.c
>>> @@ -16,8 +16,9 @@
>>>  #include <linux/interrupt.h>
>>>  #include <linux/io.h>
>>>  #include <linux/module.h>
>>> -#include <linux/of_device.h>
>>> +#include <linux/mod_devicetable.h>
>>>  #include <linux/platform_device.h>
>>> +#include <linux/property.h>
>>>  #include <linux/sched.h>
>>>  #include <linux/wait.h>
>>>  #include <linux/iio/iio.h>
>>> @@ -650,8 +651,8 @@ at91_adc_chan_get(struct iio_dev *indio_dev, int chan)
>>>         return indio_dev->channels + index;
>>>  }
>>>
>>> -static inline int at91_adc_of_xlate(struct iio_dev *indio_dev,
>>> -                                   const struct of_phandle_args *iiospec)
>>> +static inline int at91_adc_fwnode_xlate(struct iio_dev *indio_dev,
>>> +                                       const struct fwnode_reference_args *iiospec)
>>>  {
>>>         return at91_adc_chan_xlate(indio_dev, iiospec->args[0]);
>>>  }
>>> @@ -1876,7 +1877,7 @@ static const struct iio_info at91_adc_info = {
>>>         .read_raw = &at91_adc_read_raw,
>>>         .write_raw = &at91_adc_write_raw,
>>>         .update_scan_mode = &at91_adc_update_scan_mode,
>>> -       .of_xlate = &at91_adc_of_xlate,
>>> +       .fwnode_xlate = &at91_adc_fwnode_xlate,
>>>         .hwfifo_set_watermark = &at91_adc_set_watermark,
>>>  };
>>>
>>> @@ -1920,6 +1921,7 @@ static int at91_adc_buffer_and_trigger_init(struct device *dev,
>>>
>>>  static int at91_adc_probe(struct platform_device *pdev)
>>>  {
>>> +       struct device *dev = &pdev->dev;
>>>         struct iio_dev *indio_dev;
>>>         struct at91_adc_state *st;
>>>         struct resource *res;
>>> @@ -1933,7 +1935,7 @@ static int at91_adc_probe(struct platform_device *pdev)
>>>         st = iio_priv(indio_dev);
>>>         st->indio_dev = indio_dev;
>>>
>>> -       st->soc_info.platform = of_device_get_match_data(&pdev->dev);
>>> +       st->soc_info.platform = device_get_match_data(dev);
>>>
>>>         indio_dev->name = dev_name(&pdev->dev);
>>>         indio_dev->modes = INDIO_DIRECT_MODE | INDIO_BUFFER_SOFTWARE;
>>> @@ -1950,34 +1952,32 @@ static int at91_adc_probe(struct platform_device *pdev)
>>>
>>>         st->oversampling_ratio = AT91_OSR_1SAMPLES;
>>>
>>> -       ret = of_property_read_u32(pdev->dev.of_node,
>>> -                                  "atmel,min-sample-rate-hz",
>>> -                                  &st->soc_info.min_sample_rate);
>>> +       ret = device_property_read_u32(dev, "atmel,min-sample-rate-hz",
>>> +                                      &st->soc_info.min_sample_rate);
>>>         if (ret) {
>>>                 dev_err(&pdev->dev,
>>>                         "invalid or missing value for atmel,min-sample-rate-hz\n");
>>>                 return ret;
>>>         }
>>>
>>> -       ret = of_property_read_u32(pdev->dev.of_node,
>>> -                                  "atmel,max-sample-rate-hz",
>>> -                                  &st->soc_info.max_sample_rate);
>>> +       ret = device_property_read_u32(dev, "atmel,max-sample-rate-hz",
>>> +                                      &st->soc_info.max_sample_rate);
>>>         if (ret) {
>>>                 dev_err(&pdev->dev,
>>>                         "invalid or missing value for atmel,max-sample-rate-hz\n");
>>>                 return ret;
>>>         }
>>>
>>> -       ret = of_property_read_u32(pdev->dev.of_node, "atmel,startup-time-ms",
>>> -                                  &st->soc_info.startup_time);
>>> +       ret = device_property_read_u32(dev, "atmel,startup-time-ms",
>>> +                                      &st->soc_info.startup_time);
>>>         if (ret) {
>>>                 dev_err(&pdev->dev,
>>>                         "invalid or missing value for atmel,startup-time-ms\n");
>>>                 return ret;
>>>         }
>>>
>>> -       ret = of_property_read_u32(pdev->dev.of_node,
>>> -                                  "atmel,trigger-edge-type", &edge_type);
>>> +       ret = device_property_read_u32(dev, "atmel,trigger-edge-type",
>>> +                                      &edge_type);
>>>         if (ret) {
>>>                 dev_dbg(&pdev->dev,
>>>                         "atmel,trigger-edge-type not specified, only software trigger available\n");
>>> --
>>> 2.37.1
>>>
>>
>