[PATCH v9,1/7] thermal: mediatek: Relocate driver to mediatek folder

[bchihi at baylibre.com]

From: Michael Kao <michael.kao at mediatek.com>

Add MediaTek proprietary folder to upstream more thermal zone and cooler
drivers, relocate the original thermal controller driver to it, and rename it
as "auxadc_thermal.c" to show its purpose more clearly.

Signed-off-by: Michael Kao <michael.kao at mediatek.com>
Co-developed-by: Ben Tseng <ben.tseng at mediatek.com>
Signed-off-by: Ben Tseng <ben.tseng at mediatek.com>
Co-developed-by: Balsam CHIHI <bchihi at baylibre.com>
Signed-off-by: Balsam CHIHI <bchihi at baylibre.com>
---
 drivers/thermal/Kconfig                       | 14 ++++--------
 drivers/thermal/Makefile                      |  2 +-
 drivers/thermal/mediatek/Kconfig              | 22 +++++++++++++++++++
 drivers/thermal/mediatek/Makefile             |  1 +
 .../auxadc_thermal.c}                         |  2 +-
 5 files changed, 29 insertions(+), 12 deletions(-)
 create mode 100644 drivers/thermal/mediatek/Kconfig
 create mode 100644 drivers/thermal/mediatek/Makefile
 rename drivers/thermal/{mtk_thermal.c => mediatek/auxadc_thermal.c} (99%)

diff --git a/drivers/thermal/Kconfig b/drivers/thermal/Kconfig
index e052dae614eb..d35f63daca3b 100644
--- a/drivers/thermal/Kconfig
+++ b/drivers/thermal/Kconfig
@@ -412,16 +412,10 @@ config DA9062_THERMAL
 	  zone.
 	  Compatible with the DA9062 and DA9061 PMICs.
 
-config MTK_THERMAL
-	tristate "Temperature sensor driver for mediatek SoCs"
-	depends on ARCH_MEDIATEK || COMPILE_TEST
-	depends on HAS_IOMEM
-	depends on NVMEM || NVMEM=n
-	depends on RESET_CONTROLLER
-	default y
-	help
-	  Enable this option if you want to have support for thermal management
-	  controller present in Mediatek SoCs
+menu "Mediatek thermal drivers"
+depends on ARCH_MEDIATEK || COMPILE_TEST
+source "drivers/thermal/mediatek/Kconfig"
+endmenu
 
 config AMLOGIC_THERMAL
 	tristate "Amlogic Thermal Support"
diff --git a/drivers/thermal/Makefile b/drivers/thermal/Makefile
index def8e1a0399c..f7daeb8056c4 100644
--- a/drivers/thermal/Makefile
+++ b/drivers/thermal/Makefile
@@ -55,7 +55,7 @@ obj-y				+= st/
 obj-$(CONFIG_QCOM_TSENS)	+= qcom/
 obj-y				+= tegra/
 obj-$(CONFIG_HISI_THERMAL)     += hisi_thermal.o
-obj-$(CONFIG_MTK_THERMAL)	+= mtk_thermal.o
+obj-y				+= mediatek/
 obj-$(CONFIG_GENERIC_ADC_THERMAL)	+= thermal-generic-adc.o
 obj-$(CONFIG_UNIPHIER_THERMAL)	+= uniphier_thermal.o
 obj-$(CONFIG_AMLOGIC_THERMAL)     += amlogic_thermal.o
diff --git a/drivers/thermal/mediatek/Kconfig b/drivers/thermal/mediatek/Kconfig
new file mode 100644
index 000000000000..8ff32370b591
--- /dev/null
+++ b/drivers/thermal/mediatek/Kconfig
@@ -0,0 +1,22 @@
+config MTK_THERMAL
+	tristate "MediaTek thermal drivers"
+	depends on THERMAL_OF
+	help
+	  This is the option for MediaTek thermal software solutions.
+	  Please enable corresponding options to get temperature
+	  information from thermal sensors or turn on throttle
+	  mechaisms for thermal mitigation.
+
+if MTK_THERMAL
+
+config MTK_SOC_THERMAL
+	tristate "AUXADC temperature sensor driver for MediaTek SoCs"
+	depends on HAS_IOMEM
+	depends on NVMEM
+	depends on RESET_CONTROLLER
+	help
+	  Enable this option if you want to get SoC temperature
+	  information for MediaTek platforms. This driver configures
+	  thermal controllers to collect temperature via AUXADC interface.
+
+endif
diff --git a/drivers/thermal/mediatek/Makefile b/drivers/thermal/mediatek/Makefile
new file mode 100644
index 000000000000..bec325f06a46
--- /dev/null
+++ b/drivers/thermal/mediatek/Makefile
@@ -0,0 +1 @@
+obj-$(CONFIG_MTK_SOC_THERMAL)		+= auxadc_thermal.o
diff --git a/drivers/thermal/mtk_thermal.c b/drivers/thermal/mediatek/auxadc_thermal.c
similarity index 99%
rename from drivers/thermal/mtk_thermal.c
rename to drivers/thermal/mediatek/auxadc_thermal.c
index ede94eadddda..60924f8f98e9 100644
--- a/drivers/thermal/mtk_thermal.c
+++ b/drivers/thermal/mediatek/auxadc_thermal.c
@@ -23,7 +23,7 @@
 #include <linux/reset.h>
 #include <linux/types.h>
 
-#include "thermal_hwmon.h"
+#include "../thermal_hwmon.h"
 
 /* AUXADC Registers */
 #define AUXADC_CON1_SET_V	0x008
-- 
2.34.1