[PATCH 3/9] wifi: mt76: connac: rely on mt76_connac_mcu_uni_set_chctx

Lorenzo Bianconi lorenzo at kernel.org
Wed Aug 17 00:13:06 PDT 2022


> From: Sean Wang <sean.wang at mediatek.com>
> 
> Reuse mt76_connac_mcu_uni_set_chctx to avoid the dupicated code.

I guess you can squash this patch with the previous one.

Regards,
Lorenzo

> 
> Signed-off-by: Sean Wang <sean.wang at mediatek.com>
> ---
>  .../wireless/mediatek/mt76/mt76_connac_mcu.c  | 73 +------------------
>  1 file changed, 1 insertion(+), 72 deletions(-)
> 
> diff --git a/drivers/net/wireless/mediatek/mt76/mt76_connac_mcu.c b/drivers/net/wireless/mediatek/mt76/mt76_connac_mcu.c
> index 3d5c70765d4f..3e473a409790 100644
> --- a/drivers/net/wireless/mediatek/mt76/mt76_connac_mcu.c
> +++ b/drivers/net/wireless/mediatek/mt76/mt76_connac_mcu.c
> @@ -1401,7 +1401,6 @@ int mt76_connac_mcu_uni_add_bss(struct mt76_phy *phy,
>  {
>  	struct mt76_vif *mvif = (struct mt76_vif *)vif->drv_priv;
>  	struct cfg80211_chan_def *chandef = &phy->chandef;
> -	int freq1 = chandef->center_freq1, freq2 = chandef->center_freq2;
>  	enum nl80211_band band = chandef->chan->band;
>  	struct mt76_dev *mdev = phy->dev;
>  	struct {
> @@ -1432,43 +1431,6 @@ int mt76_connac_mcu_uni_add_bss(struct mt76_phy *phy,
>  			.qos = vif->bss_conf.qos,
>  		},
>  	};
> -	struct {
> -		struct {
> -			u8 bss_idx;
> -			u8 pad[3];
> -		} __packed hdr;
> -		struct rlm_tlv {
> -			__le16 tag;
> -			__le16 len;
> -			u8 control_channel;
> -			u8 center_chan;
> -			u8 center_chan2;
> -			u8 bw;
> -			u8 tx_streams;
> -			u8 rx_streams;
> -			u8 short_st;
> -			u8 ht_op_info;
> -			u8 sco;
> -			u8 band;
> -			u8 pad[2];
> -		} __packed rlm;
> -	} __packed rlm_req = {
> -		.hdr = {
> -			.bss_idx = mvif->idx,
> -		},
> -		.rlm = {
> -			.tag = cpu_to_le16(UNI_BSS_INFO_RLM),
> -			.len = cpu_to_le16(sizeof(struct rlm_tlv)),
> -			.control_channel = chandef->chan->hw_value,
> -			.center_chan = ieee80211_frequency_to_channel(freq1),
> -			.center_chan2 = ieee80211_frequency_to_channel(freq2),
> -			.tx_streams = hweight8(phy->antenna_mask),
> -			.ht_op_info = 4, /* set HT 40M allowed */
> -			.rx_streams = phy->chainmask,
> -			.short_st = true,
> -			.band = band,
> -		},
> -	};
>  	int err, conn_type;
>  	u8 idx, basic_phy;
>  
> @@ -1555,40 +1517,7 @@ int mt76_connac_mcu_uni_add_bss(struct mt76_phy *phy,
>  			return err;
>  	}
>  
> -	switch (chandef->width) {
> -	case NL80211_CHAN_WIDTH_40:
> -		rlm_req.rlm.bw = CMD_CBW_40MHZ;
> -		break;
> -	case NL80211_CHAN_WIDTH_80:
> -		rlm_req.rlm.bw = CMD_CBW_80MHZ;
> -		break;
> -	case NL80211_CHAN_WIDTH_80P80:
> -		rlm_req.rlm.bw = CMD_CBW_8080MHZ;
> -		break;
> -	case NL80211_CHAN_WIDTH_160:
> -		rlm_req.rlm.bw = CMD_CBW_160MHZ;
> -		break;
> -	case NL80211_CHAN_WIDTH_5:
> -		rlm_req.rlm.bw = CMD_CBW_5MHZ;
> -		break;
> -	case NL80211_CHAN_WIDTH_10:
> -		rlm_req.rlm.bw = CMD_CBW_10MHZ;
> -		break;
> -	case NL80211_CHAN_WIDTH_20_NOHT:
> -	case NL80211_CHAN_WIDTH_20:
> -	default:
> -		rlm_req.rlm.bw = CMD_CBW_20MHZ;
> -		rlm_req.rlm.ht_op_info = 0;
> -		break;
> -	}
> -
> -	if (rlm_req.rlm.control_channel < rlm_req.rlm.center_chan)
> -		rlm_req.rlm.sco = 1; /* SCA */
> -	else if (rlm_req.rlm.control_channel > rlm_req.rlm.center_chan)
> -		rlm_req.rlm.sco = 3; /* SCB */
> -
> -	return mt76_mcu_send_msg(mdev, MCU_UNI_CMD(BSS_INFO_UPDATE), &rlm_req,
> -				 sizeof(rlm_req), true);
> +	return mt76_connac_mcu_uni_set_chctx(phy, mvif, NULL);
>  }
>  EXPORT_SYMBOL_GPL(mt76_connac_mcu_uni_add_bss);
>  
> -- 
> 2.25.1
> 
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 228 bytes
Desc: not available
URL: <http://lists.infradead.org/pipermail/linux-mediatek/attachments/20220817/f7888e73/attachment.sig>


More information about the Linux-mediatek mailing list