[PATCH v2 3/7] dt-bindings: net: dsa: mediatek,mt7530: update examples
Arınç ÜNAL
arinc.unal at arinc9.com
Sat Aug 13 08:44:11 PDT 2022
Update the examples on the binding.
- Add examples which include a wide variation of configurations.
- Make example comments YAML comment instead of DT binding comment.
- Define examples from platform to make the bindings clearer.
- Add interrupt controller to the examples. Include header file for
interrupt.
- Change reset line for MT7621 examples.
- Pretty formatting for the examples.
- Change switch reg to 0.
- Change port labels to fit the example, change port 4 label to wan.
- Change ethernet-ports to ports.
Signed-off-by: Arınç ÜNAL <arinc.unal at arinc9.com>
---
.../bindings/net/dsa/mediatek,mt7530.yaml | 663 +++++++++++++-----
1 file changed, 502 insertions(+), 161 deletions(-)
diff --git a/Documentation/devicetree/bindings/net/dsa/mediatek,mt7530.yaml b/Documentation/devicetree/bindings/net/dsa/mediatek,mt7530.yaml
index 4c99266ce82a..cc87f48d4d07 100644
--- a/Documentation/devicetree/bindings/net/dsa/mediatek,mt7530.yaml
+++ b/Documentation/devicetree/bindings/net/dsa/mediatek,mt7530.yaml
@@ -210,144 +210,374 @@ allOf:
unevaluatedProperties: false
examples:
+ # Example 1: Standalone MT7530
- |
#include <dt-bindings/gpio/gpio.h>
- mdio {
- #address-cells = <1>;
- #size-cells = <0>;
- switch at 0 {
- compatible = "mediatek,mt7530";
- reg = <0>;
-
- core-supply = <&mt6323_vpa_reg>;
- io-supply = <&mt6323_vemc3v3_reg>;
- reset-gpios = <&pio 33 GPIO_ACTIVE_HIGH>;
-
- ethernet-ports {
+
+ platform {
+ ethernet {
+ mdio {
#address-cells = <1>;
#size-cells = <0>;
- port at 0 {
+
+ switch at 0 {
+ compatible = "mediatek,mt7530";
reg = <0>;
- label = "lan0";
- };
- port at 1 {
- reg = <1>;
- label = "lan1";
- };
+ reset-gpios = <&pio 33 0>;
- port at 2 {
- reg = <2>;
- label = "lan2";
- };
+ core-supply = <&mt6323_vpa_reg>;
+ io-supply = <&mt6323_vemc3v3_reg>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
- port at 3 {
- reg = <3>;
- label = "lan3";
+ port at 0 {
+ reg = <0>;
+ label = "lan1";
+ };
+
+ port at 1 {
+ reg = <1>;
+ label = "lan2";
+ };
+
+ port at 2 {
+ reg = <2>;
+ label = "lan3";
+ };
+
+ port at 3 {
+ reg = <3>;
+ label = "lan4";
+ };
+
+ port at 4 {
+ reg = <4>;
+ label = "wan";
+ };
+
+ port at 6 {
+ reg = <6>;
+ label = "cpu";
+ ethernet = <&gmac0>;
+ phy-mode = "rgmii";
+
+ fixed-link {
+ speed = <1000>;
+ full-duplex;
+ pause;
+ };
+ };
+ };
};
+ };
+ };
+ };
- port at 4 {
- reg = <4>;
- label = "wan";
+ # Example 2: MT7530 in MT7623AI SoC
+ - |
+ #include <dt-bindings/reset/mt2701-resets.h>
+
+ platform {
+ ethernet {
+ mdio {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ switch at 0 {
+ compatible = "mediatek,mt7530";
+ reg = <0>;
+
+ mediatek,mcm;
+ resets = <ðsys MT2701_ETHSYS_MCM_RST>;
+ reset-names = "mcm";
+
+ core-supply = <&mt6323_vpa_reg>;
+ io-supply = <&mt6323_vemc3v3_reg>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port at 0 {
+ reg = <0>;
+ label = "lan1";
+ };
+
+ port at 1 {
+ reg = <1>;
+ label = "lan2";
+ };
+
+ port at 2 {
+ reg = <2>;
+ label = "lan3";
+ };
+
+ port at 3 {
+ reg = <3>;
+ label = "lan4";
+ };
+
+ port at 4 {
+ reg = <4>;
+ label = "wan";
+ };
+
+ port at 6 {
+ reg = <6>;
+ label = "cpu";
+ ethernet = <&gmac0>;
+ phy-mode = "trgmii";
+
+ fixed-link {
+ speed = <1000>;
+ full-duplex;
+ pause;
+ };
+ };
+ };
};
+ };
+ };
+ };
+
+ # Example 3: Standalone MT7531
+ - |
+ #include <dt-bindings/gpio/gpio.h>
+ #include <dt-bindings/interrupt-controller/irq.h>
+
+ platform {
+ ethernet {
+ mdio {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ switch at 0 {
+ compatible = "mediatek,mt7531";
+ reg = <0>;
+
+ reset-gpios = <&pio 54 0>;
+
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ interrupt-parent = <&pio>;
+ interrupts = <53 IRQ_TYPE_LEVEL_HIGH>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port at 0 {
+ reg = <0>;
+ label = "lan1";
+ };
+
+ port at 1 {
+ reg = <1>;
+ label = "lan2";
+ };
+
+ port at 2 {
+ reg = <2>;
+ label = "lan3";
+ };
+
+ port at 3 {
+ reg = <3>;
+ label = "lan4";
+ };
- port at 6 {
- reg = <6>;
- label = "cpu";
- ethernet = <&gmac0>;
- phy-mode = "trgmii";
- fixed-link {
- speed = <1000>;
- full-duplex;
+ port at 4 {
+ reg = <4>;
+ label = "wan";
+ };
+
+ port at 6 {
+ reg = <6>;
+ label = "cpu";
+ ethernet = <&gmac0>;
+ phy-mode = "2500base-x";
+
+ fixed-link {
+ speed = <2500>;
+ full-duplex;
+ pause;
+ };
+ };
};
};
};
};
};
+ # Example 4: MT7530 in MT7621AT, MT7621DAT and MT7621ST SoCs
- |
- //Example 2: MT7621: Port 4 is WAN port: 2nd GMAC -> Port 5 -> PHY port 4.
-
- ethernet {
- #address-cells = <1>;
- #size-cells = <0>;
- gmac0: mac at 0 {
- compatible = "mediatek,eth-mac";
- reg = <0>;
- phy-mode = "rgmii";
-
- fixed-link {
- speed = <1000>;
- full-duplex;
- pause;
+ #include <dt-bindings/interrupt-controller/mips-gic.h>
+ #include <dt-bindings/reset/mt7621-reset.h>
+
+ platform {
+ ethernet {
+ mdio {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ switch at 0 {
+ compatible = "mediatek,mt7621";
+ reg = <0>;
+
+ mediatek,mcm;
+ resets = <&sysc MT7621_RST_MCM>;
+ reset-names = "mcm";
+
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ interrupt-parent = <&gic>;
+ interrupts = <GIC_SHARED 23 IRQ_TYPE_LEVEL_HIGH>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port at 0 {
+ reg = <0>;
+ label = "lan1";
+ };
+
+ port at 1 {
+ reg = <1>;
+ label = "lan2";
+ };
+
+ port at 2 {
+ reg = <2>;
+ label = "lan3";
+ };
+
+ port at 3 {
+ reg = <3>;
+ label = "lan4";
+ };
+
+ port at 4 {
+ reg = <4>;
+ label = "wan";
+ };
+
+ port at 6 {
+ reg = <6>;
+ label = "cpu";
+ ethernet = <&gmac0>;
+ phy-mode = "trgmii";
+
+ fixed-link {
+ speed = <1000>;
+ full-duplex;
+ pause;
+ };
+ };
+ };
+ };
};
};
+ };
- gmac1: mac at 1 {
- compatible = "mediatek,eth-mac";
- reg = <1>;
- phy-mode = "rgmii-txid";
- phy-handle = <&phy4>;
+ # Example 5: MT7621: mux MT7530's phy4 to SoC's gmac1
+ - |
+ #include <dt-bindings/interrupt-controller/mips-gic.h>
+ #include <dt-bindings/reset/mt7621-reset.h>
+
+ platform {
+ pinctrl {
+ example5_rgmii2_pins: rgmii2-pins {
+ pinmux {
+ groups = "rgmii2";
+ function = "rgmii2";
+ };
+ };
};
- mdio: mdio-bus {
+ ethernet {
#address-cells = <1>;
#size-cells = <0>;
- /* Internal phy */
- phy4: ethernet-phy at 4 {
- reg = <4>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&example5_rgmii2_pins>;
+
+ mac at 1 {
+ compatible = "mediatek,eth-mac";
+ reg = <1>;
+
+ phy-mode = "rgmii";
+ phy-handle = <&example5_ethphy4>;
};
- mt7530: switch at 1f {
- compatible = "mediatek,mt7621";
- reg = <0x1f>;
- mediatek,mcm;
+ mdio {
+ #address-cells = <1>;
+ #size-cells = <0>;
- resets = <&rstctrl 2>;
- reset-names = "mcm";
+ /* MT7530's phy4 */
+ example5_ethphy4: ethernet-phy at 4 {
+ reg = <4>;
+ };
- ethernet-ports {
- #address-cells = <1>;
- #size-cells = <0>;
+ switch at 0 {
+ compatible = "mediatek,mt7621";
+ reg = <0>;
- port at 0 {
- reg = <0>;
- label = "lan0";
- };
+ mediatek,mcm;
+ resets = <&sysc MT7621_RST_MCM>;
+ reset-names = "mcm";
- port at 1 {
- reg = <1>;
- label = "lan1";
- };
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ interrupt-parent = <&gic>;
+ interrupts = <GIC_SHARED 23 IRQ_TYPE_LEVEL_HIGH>;
- port at 2 {
- reg = <2>;
- label = "lan2";
- };
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
- port at 3 {
- reg = <3>;
- label = "lan3";
- };
+ port at 0 {
+ reg = <0>;
+ label = "lan1";
+ };
- /* Commented out. Port 4 is handled by 2nd GMAC.
- port at 4 {
- reg = <4>;
- label = "lan4";
- };
- */
+ port at 1 {
+ reg = <1>;
+ label = "lan2";
+ };
- port at 6 {
- reg = <6>;
- label = "cpu";
- ethernet = <&gmac0>;
- phy-mode = "rgmii";
+ port at 2 {
+ reg = <2>;
+ label = "lan3";
+ };
- fixed-link {
- speed = <1000>;
- full-duplex;
- pause;
+ port at 3 {
+ reg = <3>;
+ label = "lan4";
+ };
+
+ /* Commented out, phy4 is muxed to gmac1.
+ port at 4 {
+ reg = <4>;
+ label = "wan";
+ };
+ */
+
+ port at 6 {
+ reg = <6>;
+ label = "cpu";
+ ethernet = <&gmac0>;
+ phy-mode = "trgmii";
+
+ fixed-link {
+ speed = <1000>;
+ full-duplex;
+ pause;
+ };
};
};
};
@@ -355,87 +585,198 @@ examples:
};
};
+ # Example 6: MT7621: mux external phy to SoC's gmac1
- |
- //Example 3: MT7621: Port 5 is connected to external PHY: Port 5 -> external PHY.
-
- ethernet {
- #address-cells = <1>;
- #size-cells = <0>;
- gmac_0: mac at 0 {
- compatible = "mediatek,eth-mac";
- reg = <0>;
- phy-mode = "rgmii";
-
- fixed-link {
- speed = <1000>;
- full-duplex;
- pause;
+ #include <dt-bindings/interrupt-controller/mips-gic.h>
+ #include <dt-bindings/reset/mt7621-reset.h>
+
+ platform {
+ pinctrl {
+ example6_rgmii2_pins: rgmii2-pins {
+ pinmux {
+ groups = "rgmii2";
+ function = "rgmii2";
+ };
};
};
- mdio0: mdio-bus {
+ ethernet {
#address-cells = <1>;
#size-cells = <0>;
- /* External phy */
- ephy5: ethernet-phy at 7 {
- reg = <7>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&example6_rgmii2_pins>;
+
+ mac at 1 {
+ compatible = "mediatek,eth-mac";
+ reg = <1>;
+
+ phy-mode = "rgmii";
+ phy-handle = <&example6_ethphy7>;
};
- switch at 1f {
- compatible = "mediatek,mt7621";
- reg = <0x1f>;
- mediatek,mcm;
+ mdio {
+ #address-cells = <1>;
+ #size-cells = <0>;
- resets = <&rstctrl 2>;
- reset-names = "mcm";
+ /* External PHY */
+ example6_ethphy7: ethernet-phy at 7 {
+ reg = <7>;
+ phy-mode = "rgmii";
+ };
- ethernet-ports {
- #address-cells = <1>;
- #size-cells = <0>;
+ switch at 0 {
+ compatible = "mediatek,mt7621";
+ reg = <0>;
- port at 0 {
- reg = <0>;
- label = "lan0";
- };
+ mediatek,mcm;
+ resets = <&sysc MT7621_RST_MCM>;
+ reset-names = "mcm";
- port at 1 {
- reg = <1>;
- label = "lan1";
- };
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ interrupt-parent = <&gic>;
+ interrupts = <GIC_SHARED 23 IRQ_TYPE_LEVEL_HIGH>;
- port at 2 {
- reg = <2>;
- label = "lan2";
- };
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
- port at 3 {
- reg = <3>;
- label = "lan3";
- };
+ port at 0 {
+ reg = <0>;
+ label = "lan1";
+ };
- port at 4 {
- reg = <4>;
- label = "lan4";
- };
+ port at 1 {
+ reg = <1>;
+ label = "lan2";
+ };
+
+ port at 2 {
+ reg = <2>;
+ label = "lan3";
+ };
- port at 5 {
- reg = <5>;
- label = "lan5";
- phy-mode = "rgmii";
- phy-handle = <&ephy5>;
+ port at 3 {
+ reg = <3>;
+ label = "lan4";
+ };
+
+ port at 4 {
+ reg = <4>;
+ label = "wan";
+ };
+
+ port at 6 {
+ reg = <6>;
+ label = "cpu";
+ ethernet = <&gmac0>;
+ phy-mode = "trgmii";
+
+ fixed-link {
+ speed = <1000>;
+ full-duplex;
+ pause;
+ };
+ };
};
+ };
+ };
+ };
+ };
+
+ # Example 7: MT7621: mux external phy to MT7530's port 5
+ - |
+ #include <dt-bindings/interrupt-controller/mips-gic.h>
+ #include <dt-bindings/reset/mt7621-reset.h>
+
+ platform {
+ pinctrl {
+ example7_rgmii2_pins: rgmii2-pins {
+ pinmux {
+ groups = "rgmii2";
+ function = "gpio";
+ };
+ };
+ };
+
+ ethernet {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&example7_rgmii2_pins>;
- cpu_port0: port at 6 {
- reg = <6>;
- label = "cpu";
- ethernet = <&gmac_0>;
- phy-mode = "rgmii";
+ mdio {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ /* External PHY */
+ example7_ethphy7: ethernet-phy at 7 {
+ reg = <7>;
+ phy-mode = "rgmii";
+ };
+
+ switch at 0 {
+ compatible = "mediatek,mt7621";
+ reg = <0>;
+
+ mediatek,mcm;
+ resets = <&sysc MT7621_RST_MCM>;
+ reset-names = "mcm";
+
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ interrupt-parent = <&gic>;
+ interrupts = <GIC_SHARED 23 IRQ_TYPE_LEVEL_HIGH>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port at 0 {
+ reg = <0>;
+ label = "lan1";
+ };
+
+ port at 1 {
+ reg = <1>;
+ label = "lan2";
+ };
+
+ port at 2 {
+ reg = <2>;
+ label = "lan3";
+ };
+
+ port at 3 {
+ reg = <3>;
+ label = "lan4";
+ };
+
+ port at 4 {
+ reg = <4>;
+ label = "wan";
+ };
+
+ port at 5 {
+ reg = <5>;
+ label = "extphy";
+ phy-mode = "rgmii-txid";
+ phy-handle = <&example7_ethphy7>;
+ };
- fixed-link {
- speed = <1000>;
- full-duplex;
- pause;
+ port at 6 {
+ reg = <6>;
+ label = "cpu";
+ ethernet = <&gmac0>;
+ phy-mode = "trgmii";
+
+ fixed-link {
+ speed = <1000>;
+ full-duplex;
+ pause;
+ };
};
};
};
--
2.34.1
More information about the Linux-mediatek
mailing list