[PATCH v4 2/4] memory: mtk-smi: Add return value for configure port function

[Yong Wu]

On Mon, 2022-08-01 at 10:18 +0800, Chengci.Xu wrote:
> In MT8188, the register to enable/disable IOMMU can only be
> configured
> in secure world by SMC call. We should add a return value for
> configure
> port function for preparation because SMC call may return an error
> result.
> 
> Signed-off-by: Chengci.Xu <chengci.xu at mediatek.com>
> ---
>  drivers/memory/mtk-smi.c | 20 +++++++++++++-------
>  1 file changed, 13 insertions(+), 7 deletions(-)
> 
> diff --git a/drivers/memory/mtk-smi.c b/drivers/memory/mtk-smi.c
> index d7cb7ead2ac7..08c1668d47bf 100644
> --- a/drivers/memory/mtk-smi.c
> +++ b/drivers/memory/mtk-smi.c
> @@ -127,7 +127,7 @@ struct mtk_smi_common_plat {
>  
>  struct mtk_smi_larb_gen {
>  	int port_in_larb[MTK_LARB_NR_MAX + 1];
> -	void (*config_port)(struct device *dev);
> +	int				(*config_port)(struct device
> *dev);
>  	unsigned int			larb_direct_to_common_mask;
>  	unsigned int			flags_general;
>  	const u8			(*ostd)[SMI_LARB_PORT_NR_MAX];
> @@ -185,7 +185,7 @@ static const struct component_ops
> mtk_smi_larb_component_ops = {
>  	.unbind = mtk_smi_larb_unbind,
>  };
>  
> -static void mtk_smi_larb_config_port_gen1(struct device *dev)
> +static int mtk_smi_larb_config_port_gen1(struct device *dev)
>  {
>  	struct mtk_smi_larb *larb = dev_get_drvdata(dev);
>  	const struct mtk_smi_larb_gen *larb_gen = larb->larb_gen;
> @@ -214,23 +214,26 @@ static void
> mtk_smi_larb_config_port_gen1(struct device *dev)
>  			common->smi_ao_base
>  			+ REG_SMI_SECUR_CON_ADDR(m4u_port_id));
>  	}
> +	return 0;
>  }
>  
> -static void mtk_smi_larb_config_port_mt8167(struct device *dev)
> +static int mtk_smi_larb_config_port_mt8167(struct device *dev)
>  {
>  	struct mtk_smi_larb *larb = dev_get_drvdata(dev);
>  
>  	writel(*larb->mmu, larb->base + MT8167_SMI_LARB_MMU_EN);
> +	return 0;
>  }
>  
> -static void mtk_smi_larb_config_port_mt8173(struct device *dev)
> +static int mtk_smi_larb_config_port_mt8173(struct device *dev)
>  {
>  	struct mtk_smi_larb *larb = dev_get_drvdata(dev);
>  
>  	writel(*larb->mmu, larb->base + MT8173_SMI_LARB_MMU_EN);
> +	return 0;
>  }
>  
> -static void mtk_smi_larb_config_port_gen2_general(struct device
> *dev)
> +static int mtk_smi_larb_config_port_gen2_general(struct device *dev)
>  {
>  	struct mtk_smi_larb *larb = dev_get_drvdata(dev);
>  	u32 reg, flags_general = larb->larb_gen->flags_general;
> @@ -238,7 +241,7 @@ static void
> mtk_smi_larb_config_port_gen2_general(struct device *dev)
>  	int i;
>  
>  	if (BIT(larb->larbid) & larb->larb_gen-
> >larb_direct_to_common_mask)
> -		return;
> +		return 0;
>  
>  	if (MTK_SMI_CAPS(flags_general, MTK_SMI_FLAG_THRT_UPDATE)) {
>  		reg = readl_relaxed(larb->base +
> SMI_LARB_CMD_THRT_CON);
> @@ -259,6 +262,7 @@ static void
> mtk_smi_larb_config_port_gen2_general(struct device *dev)
>  		reg |= BANK_SEL(larb->bank[i]);
>  		writel(reg, larb->base + SMI_LARB_NONSEC_CON(i));
>  	}
> +	return 0;
>  }
>  
>  static const u8 mtk_smi_larb_mt8195_ostd[][SMI_LARB_PORT_NR_MAX] = {
> @@ -511,7 +515,9 @@ static int __maybe_unused
> mtk_smi_larb_resume(struct device *dev)
>  		mtk_smi_larb_sleep_ctrl_disable(larb);
>  
>  	/* Configure the basic setting for this larb */
> -	larb_gen->config_port(dev);
> +	ret = larb_gen->config_port(dev);
> +	if (ret)
> +		return ret;

return larb_gen->config_port(dev);

After this,

Reviewed-by: Yong Wu <yong.wu at mediatek.com>

>  
>  	return 0;
>  }