[PATCH v3 13/15] iio: adc: stm32-adc: convert to device properties

Fabrice Gasnier fabrice.gasnier at foss.st.com
Fri Aug 5 00:25:18 PDT 2022


On 7/15/22 14:29, Nuno Sá wrote:
> Make the conversion to firmware agnostic device properties. As part of
> the conversion the IIO inkern interface 'of_xlate()' is also converted to
> 'fwnode_xlate()'. The goal is to completely drop 'of_xlate' and hence OF
> dependencies from IIO.
> 
> Signed-off-by: Nuno Sá <nuno.sa at analog.com>
> Reviewed-by: Andy Shevchenko <andy.shevchenko at gmail.com>

Hi Nuno,

You can add my:
Reviewed-by: Fabrice Gasnier <fabrice.gasnier at foss.st.com>
Tested-by: Fabrice Gasnier <fabrice.gasnier at foss.st.com>

Best Regards,
Thanks,
Fabrice

> ---
>  drivers/iio/adc/stm32-adc.c | 125 ++++++++++++++++++++----------------
>  1 file changed, 70 insertions(+), 55 deletions(-)
> 
> diff --git a/drivers/iio/adc/stm32-adc.c b/drivers/iio/adc/stm32-adc.c
> index 3985fe972892..24248f1de1d0 100644
> --- a/drivers/iio/adc/stm32-adc.c
> +++ b/drivers/iio/adc/stm32-adc.c
> @@ -21,11 +21,11 @@
>  #include <linux/io.h>
>  #include <linux/iopoll.h>
>  #include <linux/module.h>
> +#include <linux/mod_devicetable.h>
>  #include <linux/nvmem-consumer.h>
>  #include <linux/platform_device.h>
>  #include <linux/pm_runtime.h>
> -#include <linux/of.h>
> -#include <linux/of_device.h>
> +#include <linux/property.h>
>  
>  #include "stm32-adc-core.h"
>  
> @@ -241,6 +241,7 @@ struct stm32_adc_cfg {
>   * @chan_name:		channel name array
>   * @num_diff:		number of differential channels
>   * @int_ch:		internal channel indexes array
> + * @nsmps:		number of channels with optional sample time
>   */
>  struct stm32_adc {
>  	struct stm32_adc_common	*common;
> @@ -267,6 +268,7 @@ struct stm32_adc {
>  	char			chan_name[STM32_ADC_CH_MAX][STM32_ADC_CH_SZ];
>  	u32			num_diff;
>  	int			int_ch[STM32_ADC_INT_CH_NB];
> +	int			nsmps;
>  };
>  
>  struct stm32_adc_diff_channel {
> @@ -1530,8 +1532,8 @@ static int stm32_adc_update_scan_mode(struct iio_dev *indio_dev,
>  	return ret;
>  }
>  
> -static int stm32_adc_of_xlate(struct iio_dev *indio_dev,
> -			      const struct of_phandle_args *iiospec)
> +static int stm32_adc_fwnode_xlate(struct iio_dev *indio_dev,
> +				  const struct fwnode_reference_args *iiospec)
>  {
>  	int i;
>  
> @@ -1585,7 +1587,7 @@ static const struct iio_info stm32_adc_iio_info = {
>  	.hwfifo_set_watermark = stm32_adc_set_watermark,
>  	.update_scan_mode = stm32_adc_update_scan_mode,
>  	.debugfs_reg_access = stm32_adc_debugfs_reg_access,
> -	.of_xlate = stm32_adc_of_xlate,
> +	.fwnode_xlate = stm32_adc_fwnode_xlate,
>  };
>  
>  static unsigned int stm32_adc_dma_residue(struct stm32_adc *adc)
> @@ -1782,14 +1784,14 @@ static const struct iio_chan_spec_ext_info stm32_adc_ext_info[] = {
>  	{},
>  };
>  
> -static int stm32_adc_of_get_resolution(struct iio_dev *indio_dev)
> +static int stm32_adc_fw_get_resolution(struct iio_dev *indio_dev)
>  {
> -	struct device_node *node = indio_dev->dev.of_node;
> +	struct device *dev = &indio_dev->dev;
>  	struct stm32_adc *adc = iio_priv(indio_dev);
>  	unsigned int i;
>  	u32 res;
>  
> -	if (of_property_read_u32(node, "assigned-resolution-bits", &res))
> +	if (device_property_read_u32(dev, "assigned-resolution-bits", &res))
>  		res = adc->cfg->adc_info->resolutions[0];
>  
>  	for (i = 0; i < adc->cfg->adc_info->num_res; i++)
> @@ -1873,11 +1875,11 @@ static void stm32_adc_chan_init_one(struct iio_dev *indio_dev,
>  
>  static int stm32_adc_get_legacy_chan_count(struct iio_dev *indio_dev, struct stm32_adc *adc)
>  {
> -	struct device_node *node = indio_dev->dev.of_node;
> +	struct device *dev = &indio_dev->dev;
>  	const struct stm32_adc_info *adc_info = adc->cfg->adc_info;
>  	int num_channels = 0, ret;
>  
> -	ret = of_property_count_u32_elems(node, "st,adc-channels");
> +	ret = device_property_count_u32(dev, "st,adc-channels");
>  	if (ret > adc_info->max_channels) {
>  		dev_err(&indio_dev->dev, "Bad st,adc-channels?\n");
>  		return -EINVAL;
> @@ -1885,8 +1887,12 @@ static int stm32_adc_get_legacy_chan_count(struct iio_dev *indio_dev, struct stm
>  		num_channels += ret;
>  	}
>  
> -	ret = of_property_count_elems_of_size(node, "st,adc-diff-channels",
> -					      sizeof(struct stm32_adc_diff_channel));
> +	/*
> +	 * each st,adc-diff-channels is a group of 2 u32 so we divide @ret
> +	 * to get the *real* number of channels.
> +	 */
> +	ret = device_property_count_u32(dev, "st,adc-diff-channels");
> +	ret /= (int)(sizeof(struct stm32_adc_diff_channel) / sizeof(u32));
>  	if (ret > adc_info->max_channels) {
>  		dev_err(&indio_dev->dev, "Bad st,adc-diff-channels?\n");
>  		return -EINVAL;
> @@ -1896,8 +1902,8 @@ static int stm32_adc_get_legacy_chan_count(struct iio_dev *indio_dev, struct stm
>  	}
>  
>  	/* Optional sample time is provided either for each, or all channels */
> -	ret = of_property_count_u32_elems(node, "st,min-sample-time-nsecs");
> -	if (ret > 1 && ret != num_channels) {
> +	adc->nsmps = device_property_count_u32(dev, "st,min-sample-time-nsecs");
> +	if (adc->nsmps > 1 && adc->nsmps != num_channels) {
>  		dev_err(&indio_dev->dev, "Invalid st,min-sample-time-nsecs\n");
>  		return -EINVAL;
>  	}
> @@ -1907,21 +1913,20 @@ static int stm32_adc_get_legacy_chan_count(struct iio_dev *indio_dev, struct stm
>  
>  static int stm32_adc_legacy_chan_init(struct iio_dev *indio_dev,
>  				      struct stm32_adc *adc,
> -				      struct iio_chan_spec *channels)
> +				      struct iio_chan_spec *channels,
> +				      int nchans)
>  {
> -	struct device_node *node = indio_dev->dev.of_node;
>  	const struct stm32_adc_info *adc_info = adc->cfg->adc_info;
>  	struct stm32_adc_diff_channel diff[STM32_ADC_CH_MAX];
> +	struct device *dev = &indio_dev->dev;
>  	u32 num_diff = adc->num_diff;
>  	int size = num_diff * sizeof(*diff) / sizeof(u32);
> -	int scan_index = 0, val, ret, i;
> -	struct property *prop;
> -	const __be32 *cur;
> -	u32 smp = 0;
> +	int scan_index = 0, ret, i, c;
> +	u32 smp = 0, smps[STM32_ADC_CH_MAX], chans[STM32_ADC_CH_MAX];
>  
>  	if (num_diff) {
> -		ret = of_property_read_u32_array(node, "st,adc-diff-channels",
> -						 (u32 *)diff, size);
> +		ret = device_property_read_u32_array(dev, "st,adc-diff-channels",
> +						     (u32 *)diff, size);
>  		if (ret) {
>  			dev_err(&indio_dev->dev, "Failed to get diff channels %d\n", ret);
>  			return ret;
> @@ -1942,32 +1947,47 @@ static int stm32_adc_legacy_chan_init(struct iio_dev *indio_dev,
>  		}
>  	}
>  
> -	of_property_for_each_u32(node, "st,adc-channels", prop, cur, val) {
> -		if (val >= adc_info->max_channels) {
> -			dev_err(&indio_dev->dev, "Invalid channel %d\n", val);
> +	ret = device_property_read_u32_array(dev, "st,adc-channels", chans,
> +					     nchans);
> +	if (ret)
> +		return ret;
> +
> +	for (c = 0; c < nchans; c++) {
> +		if (chans[c] >= adc_info->max_channels) {
> +			dev_err(&indio_dev->dev, "Invalid channel %d\n",
> +				chans[c]);
>  			return -EINVAL;
>  		}
>  
>  		/* Channel can't be configured both as single-ended & diff */
>  		for (i = 0; i < num_diff; i++) {
> -			if (val == diff[i].vinp) {
> -				dev_err(&indio_dev->dev, "channel %d misconfigured\n",	val);
> +			if (chans[c] == diff[i].vinp) {
> +				dev_err(&indio_dev->dev, "channel %d misconfigured\n",	chans[c]);
>  				return -EINVAL;
>  			}
>  		}
> -		stm32_adc_chan_init_one(indio_dev, &channels[scan_index], val,
> -					0, scan_index, false);
> +		stm32_adc_chan_init_one(indio_dev, &channels[scan_index],
> +					chans[c], 0, scan_index, false);
>  		scan_index++;
>  	}
>  
> +	if (adc->nsmps > 0) {
> +		ret = device_property_read_u32_array(dev, "st,min-sample-time-nsecs",
> +						     smps, adc->nsmps);
> +		if (ret)
> +			return ret;
> +	}
> +
>  	for (i = 0; i < scan_index; i++) {
>  		/*
> -		 * Using of_property_read_u32_index(), smp value will only be
> -		 * modified if valid u32 value can be decoded. This allows to
> -		 * get either no value, 1 shared value for all indexes, or one
> -		 * value per channel.
> +		 * This check is used with the above logic so that smp value
> +		 * will only be modified if valid u32 value can be decoded. This
> +		 * allows to get either no value, 1 shared value for all indexes,
> +		 * or one value per channel. The point is to have the same
> +		 * behavior as 'of_property_read_u32_index()'.
>  		 */
> -		of_property_read_u32_index(node, "st,min-sample-time-nsecs", i, &smp);
> +		if (i < adc->nsmps)
> +			smp = smps[i];
>  
>  		/* Prepare sampling time settings */
>  		stm32_adc_smpr_init(adc, channels[i].channel, smp);
> @@ -2010,22 +2030,21 @@ static int stm32_adc_generic_chan_init(struct iio_dev *indio_dev,
>  				       struct stm32_adc *adc,
>  				       struct iio_chan_spec *channels)
>  {
> -	struct device_node *node = indio_dev->dev.of_node;
>  	const struct stm32_adc_info *adc_info = adc->cfg->adc_info;
> -	struct device_node *child;
> +	struct fwnode_handle *child;
>  	const char *name;
>  	int val, scan_index = 0, ret;
>  	bool differential;
>  	u32 vin[2];
>  
> -	for_each_available_child_of_node(node, child) {
> -		ret = of_property_read_u32(child, "reg", &val);
> +	device_for_each_child_node(&indio_dev->dev, child) {
> +		ret = fwnode_property_read_u32(child, "reg", &val);
>  		if (ret) {
>  			dev_err(&indio_dev->dev, "Missing channel index %d\n", ret);
>  			goto err;
>  		}
>  
> -		ret = of_property_read_string(child, "label", &name);
> +		ret = fwnode_property_read_string(child, "label", &name);
>  		/* label is optional */
>  		if (!ret) {
>  			if (strlen(name) >= STM32_ADC_CH_SZ) {
> @@ -2050,7 +2069,7 @@ static int stm32_adc_generic_chan_init(struct iio_dev *indio_dev,
>  		}
>  
>  		differential = false;
> -		ret = of_property_read_u32_array(child, "diff-channels", vin, 2);
> +		ret = fwnode_property_read_u32_array(child, "diff-channels", vin, 2);
>  		/* diff-channels is optional */
>  		if (!ret) {
>  			differential = true;
> @@ -2067,7 +2086,7 @@ static int stm32_adc_generic_chan_init(struct iio_dev *indio_dev,
>  		stm32_adc_chan_init_one(indio_dev, &channels[scan_index], val,
>  					vin[1], scan_index, differential);
>  
> -		ret = of_property_read_u32(child, "st,min-sample-time-ns", &val);
> +		ret = fwnode_property_read_u32(child, "st,min-sample-time-ns", &val);
>  		/* st,min-sample-time-ns is optional */
>  		if (!ret) {
>  			stm32_adc_smpr_init(adc, channels[scan_index].channel, val);
> @@ -2085,14 +2104,13 @@ static int stm32_adc_generic_chan_init(struct iio_dev *indio_dev,
>  	return scan_index;
>  
>  err:
> -	of_node_put(child);
> +	fwnode_handle_put(child);
>  
>  	return ret;
>  }
>  
> -static int stm32_adc_chan_of_init(struct iio_dev *indio_dev, bool timestamping)
> +static int stm32_adc_chan_fw_init(struct iio_dev *indio_dev, bool timestamping)
>  {
> -	struct device_node *node = indio_dev->dev.of_node;
>  	struct stm32_adc *adc = iio_priv(indio_dev);
>  	const struct stm32_adc_info *adc_info = adc->cfg->adc_info;
>  	struct iio_chan_spec *channels;
> @@ -2102,7 +2120,7 @@ static int stm32_adc_chan_of_init(struct iio_dev *indio_dev, bool timestamping)
>  	for (i = 0; i < STM32_ADC_INT_CH_NB; i++)
>  		adc->int_ch[i] = STM32_ADC_INT_CH_NONE;
>  
> -	num_channels = of_get_available_child_count(node);
> +	num_channels = device_get_child_node_count(&indio_dev->dev);
>  	/* If no channels have been found, fallback to channels legacy properties. */
>  	if (!num_channels) {
>  		legacy = true;
> @@ -2133,7 +2151,8 @@ static int stm32_adc_chan_of_init(struct iio_dev *indio_dev, bool timestamping)
>  		return -ENOMEM;
>  
>  	if (legacy)
> -		ret = stm32_adc_legacy_chan_init(indio_dev, adc, channels);
> +		ret = stm32_adc_legacy_chan_init(indio_dev, adc, channels,
> +						 num_channels);
>  	else
>  		ret = stm32_adc_generic_chan_init(indio_dev, adc, channels);
>  	if (ret < 0)
> @@ -2215,9 +2234,6 @@ static int stm32_adc_probe(struct platform_device *pdev)
>  	bool timestamping = false;
>  	int ret;
>  
> -	if (!pdev->dev.of_node)
> -		return -ENODEV;
> -
>  	indio_dev = devm_iio_device_alloc(&pdev->dev, sizeof(*adc));
>  	if (!indio_dev)
>  		return -ENOMEM;
> @@ -2226,17 +2242,16 @@ static int stm32_adc_probe(struct platform_device *pdev)
>  	adc->common = dev_get_drvdata(pdev->dev.parent);
>  	spin_lock_init(&adc->lock);
>  	init_completion(&adc->completion);
> -	adc->cfg = (const struct stm32_adc_cfg *)
> -		of_match_device(dev->driver->of_match_table, dev)->data;
> +	adc->cfg = device_get_match_data(dev);
>  
>  	indio_dev->name = dev_name(&pdev->dev);
> -	indio_dev->dev.of_node = pdev->dev.of_node;
> +	device_set_node(&indio_dev->dev, dev_fwnode(&pdev->dev));
>  	indio_dev->info = &stm32_adc_iio_info;
>  	indio_dev->modes = INDIO_DIRECT_MODE | INDIO_HARDWARE_TRIGGERED;
>  
>  	platform_set_drvdata(pdev, indio_dev);
>  
> -	ret = of_property_read_u32(pdev->dev.of_node, "reg", &adc->offset);
> +	ret = device_property_read_u32(dev, "reg", &adc->offset);
>  	if (ret != 0) {
>  		dev_err(&pdev->dev, "missing reg property\n");
>  		return -EINVAL;
> @@ -2265,7 +2280,7 @@ static int stm32_adc_probe(struct platform_device *pdev)
>  		}
>  	}
>  
> -	ret = stm32_adc_of_get_resolution(indio_dev);
> +	ret = stm32_adc_fw_get_resolution(indio_dev);
>  	if (ret < 0)
>  		return ret;
>  
> @@ -2282,7 +2297,7 @@ static int stm32_adc_probe(struct platform_device *pdev)
>  		timestamping = true;
>  	}
>  
> -	ret = stm32_adc_chan_of_init(indio_dev, timestamping);
> +	ret = stm32_adc_chan_fw_init(indio_dev, timestamping);
>  	if (ret < 0)
>  		goto err_dma_disable;
>  



More information about the Linux-mediatek mailing list