[PATCH v8.1, 4/7] thermal: mediatek: Add LVTS driver for mt8192 thermal zones

[Nícolas F. R. A. Prado]

Hi Balsam,

another thing.

On Thu, Aug 04, 2022 at 03:09:09PM +0200, bchihi at baylibre.com wrote:
[..]
> --- /dev/null
> +++ b/drivers/thermal/mediatek/lvts_thermal.h
[..]
> +#define ONE_SAMPLE							(lvts_data->counting_window_us + 2 * BUS_ACCESS_US)

This macro is still using a hardcoded variable.

> +#define NUM_OF_SAMPLE(tc_id)				((lvts_data->tc[tc_id].hw_filter < LVTS_FILTER_2) ? \
> +	1 : ((lvts_data->tc[tc_id].hw_filter > LVTS_FILTER_16_OF_18) ? \
> +	1 : ((lvts_data->tc[tc_id].hw_filter == LVTS_FILTER_16_OF_18) ? \
> +	18 : ((lvts_data->tc[tc_id].hw_filter == LVTS_FILTER_8_OF_10) ? \
> +	10 : (lvts_data->tc[tc_id].hw_filter * 2)))))

Ditto.

> +
> +#define PERIOD_UNIT_US(tc_id)		((lvts_data->tc[tc_id].tc_speed->period_unit * 256 * \
> +	CLOCK_26MHZ_CYCLE_NS) / 1000)
> +#define FILTER_INT_US(tc_id)		(lvts_data->tc[tc_id].tc_speed->filter_interval_delay * \
> +	PERIOD_UNIT_US(tc_id))
> +#define SENSOR_INT_US(tc_id)		(lvts_data->tc[tc_id].tc_speed->sensor_interval_delay * \
> +	PERIOD_UNIT_US(tc_id))
> +#define GROUP_INT_US(tc_id)			(lvts_data->tc[tc_id].tc_speed->group_interval_delay * \
> +	PERIOD_UNIT_US(tc_id))

All of these too.

> +#define SENSOR_LATENCY_US(tc_id)	((NUM_OF_SAMPLE(tc_id) - 1) * FILTER_INT_US(tc_id) + \
[..]
> +#define DEVICE_READ				(CK26M_ACTIVE(lvts_data) | DEVICE_ACCESS)

And this.

> +#define DEVICE_WRITE			(CK26M_ACTIVE(lvts_data) | DEVICE_ACCESS | WRITE_ACCESS)

And this.

> +#define RESET_ALL_DEVICES		(DEVICE_WRITE | RG_TSFM_RST << 8 | 0xFF)
> +#define READ_DEVICE_REG(reg_id)	(DEVICE_READ | (reg_id) << 8 | 0x00)
> +#define READ_BACK_DEVICE_ID		(CK26M_ACTIVE(lvts_data) | DEVICE_ACCESS | BROADCAST_ID_UPDATE | \

And finally this one.

I might've have missed some, so please double-check and remove any lingering
hardcoded variable in macros.

Thanks,
Nícolas

> +	RG_DID_LVTS << 8)
[..]