[PATCH] mt76: mt7921: apply the previous MCU timeout

[sean.wang at mediatek.com]

From: Sean Wang <sean.wang at mediatek.com>

>> From: Sean Wang <sean.wang at mediatek.com>
>>
>> Apply back the previous MCU timeout that can trigger the chip reset to
>> recover the fatal error in time.
>>
>> Fixes: 8fcd1fb7cbd5 ("mt76: move mt76_connac2_mcu_fill_message in
>> mt76_connac module")
>> Signed-off-by: Sean Wang <sean.wang at mediatek.com>
>> ---
>>  drivers/net/wireless/mediatek/mt76/mt76_connac_mcu.c | 5 ++++-
>>  1 file changed, 4 insertions(+), 1 deletion(-)
>>
>> diff --git a/drivers/net/wireless/mediatek/mt76/mt76_connac_mcu.c
>>  b/drivers/net/wireless/mediatek/mt76/mt76_connac_mcu.c
>> index 0afcadce87fc..da8223c515eb 100644
>> --- a/drivers/net/wireless/mediatek/mt76/mt76_connac_mcu.c
>> +++ b/drivers/net/wireless/mediatek/mt76/mt76_connac_mcu.c
>> @@ -3050,7 +3050,10 @@ int mt76_connac2_mcu_fill_message(struct
>> mt76_dev  *dev, struct sk_buff *skb,
>>	u8 seq;
>>
>>	/* TODO: make dynamic based on msg type */
>> -	dev->mcu.timeout = 20 * HZ;
>> +	if (is_mt7921(dev))
>> +		dev->mcu.timeout = 3 * HZ;
>> +	else
>> +		dev->mcu.timeout = 20 * HZ;
>
>Hi Sean,
>
>I did not get the fix here since we are setting dev->mcu.timeout in mt76_connac2_mcu_fill_message caller (e.g. mt7921s_mcu_send_message).
>Am I missing something?

oops! You're right. The patch should be dropped out. Thanks for the head-up.

	Sean
>
>Regards,
>Lorenzo
>
>>
>>	seq = ++dev->mcu.msg_seq & 0xf;
>>	if (!seq)
>> --
>> 2.25.1
>>