[RFC v2 4/4] arm64: dts: rockchip: Add mt7531 dsa node to BPI-R2-Pro board

[Frank Wunderlich]

Am 30. April 2022 16:05:06 MESZ schrieb Heiko Stuebner <heiko at sntech.de>:
>Am Samstag, 30. April 2022, 15:03:47 CEST schrieb Frank Wunderlich:

>> --- a/arch/arm64/boot/dts/rockchip/rk3568-bpi-r2-pro.dts
>> +++ b/arch/arm64/boot/dts/rockchip/rk3568-bpi-r2-pro.dts
>> @@ -437,6 +437,54 @@ &i2c5 {
>>  	status = "disabled";
>>  };
>>  

>> +			port at 5 {
>> +				reg = <5>;
>> +				label = "cpu";
>> +				ethernet = <&gmac0>;
>> +				phy-mode = "rgmii";
>- phy-mode: String, the following values are acceptable for port
>labeled
>	"cpu":
>	If compatible mediatek,mt7530 or mediatek,mt7621 is set,
>	must be either "trgmii" or "rgmii"
>	If compatible mediatek,mt7531 is set,
>	must be either "sgmii", "1000base-x" or "2500base-x"
>
>So I guess the phy-mode needs to change?

This results from current (before my cpu-port patches) implementation in driver where cpu-port is fixed to port 6.

On Mt7530 port 6 supports rgmii and trgmii. On mt7531 port6 only supports sgmii (which is basicly 2500base-x). Afaik it does not support 1G. Port 5 on mt7531 supports rgmii or sgmii (dual sgmii mode) but seems not reflected yet in txt.

On thing more to change when converting txt to yaml.

regards Frank