[PATCH V5 12/16] dt-bindings: reset: mediatek: Add infra_ao reset bit for MT8195

[Krzysztof Kozlowski]

On 28/04/2022 13:56, Rex-BC Chen wrote:
> To support reset of infra_ao, add the bit definitions for MT8195.
> The infra_ao reset includes 5 banks and 32 bits for each bank.
> 
> Signed-off-by: Rex-BC Chen <rex-bc.chen at mediatek.com>
> ---
>  include/dt-bindings/reset/mt8195-resets.h | 170 ++++++++++++++++++++++
>  1 file changed, 170 insertions(+)
> 
> diff --git a/include/dt-bindings/reset/mt8195-resets.h b/include/dt-bindings/reset/mt8195-resets.h
> index a26bccc8b957..463114014483 100644
> --- a/include/dt-bindings/reset/mt8195-resets.h
> +++ b/include/dt-bindings/reset/mt8195-resets.h
> @@ -7,6 +7,7 @@
>  #ifndef _DT_BINDINGS_RESET_CONTROLLER_MT8195
>  #define _DT_BINDINGS_RESET_CONTROLLER_MT8195
>  
> +/* TOPRGU resets */
>  #define MT8195_TOPRGU_CONN_MCU_SW_RST          0
>  #define MT8195_TOPRGU_INFRA_GRST_SW_RST        1
>  #define MT8195_TOPRGU_APU_SW_RST               2
> @@ -26,4 +27,173 @@
>  
>  #define MT8195_TOPRGU_SW_RST_NUM               16
>  
> +/* INFRA RST0 */
> +#define MT8195_INFRA_RST0_THERM_CTRL_SWRST	0
> +#define MT8195_INFRA_RST0_RSV0			1
> +#define MT8195_INFRA_RST0_DISP_PWM1_SWRST	2
> +#define MT8195_INFRA_RST0_RSV1			3
> +#define MT8195_INFRA_RST0_MSDC3_SWRST		4
> +#define MT8195_INFRA_RST0_MSDC2_SWRST		5
> +#define MT8195_INFRA_RST0_MSDC1_SWRST		6
> +#define MT8195_INFRA_RST0_MSDC0_SWRST		7
> +#define MT8195_INFRA_RST0_RSV2			8
> +#define MT8195_INFRA_RST0_AP_DMA_SWRST		9
> +#define MT8195_INFRA_RST0_MIPI_D_SWRST		10
> +#define MT8195_INFRA_RST0_RSV3			11
> +#define MT8195_INFRA_RST0_RSV4			12
> +#define MT8195_INFRA_RST0_SSUSB_TOP_SWRST	13
> +#define MT8195_INFRA_RST0_DISP_PWM_SWRST	14
> +#define MT8195_INFRA_RST0_AUXADC_SWRST		15
> +#define MT8195_INFRA_RST0_RSV5			16
> +#define MT8195_INFRA_RST0_RSV6			17
> +#define MT8195_INFRA_RST0_RSV7			18
> +#define MT8195_INFRA_RST0_RSV8			19
> +#define MT8195_INFRA_RST0_RSV9			20
> +#define MT8195_INFRA_RST0_RSV10			21
> +#define MT8195_INFRA_RST0_RSV11			22
> +#define MT8195_INFRA_RST0_RSV12			23
> +#define MT8195_INFRA_RST0_RSV13			24
> +#define MT8195_INFRA_RST0_RSV14			25
> +#define MT8195_INFRA_RST0_RSV15			26
> +#define MT8195_INFRA_RST0_RSV16			27
> +#define MT8195_INFRA_RST0_RSV17			28
> +#define MT8195_INFRA_RST0_RSV18			29
> +#define MT8195_INFRA_RST0_RSV19			30
> +#define MT8195_INFRA_RST0_RSV20			31

These are not proper IDs... don't work-around usage of bits with fake
reserved IDs...

Best regards,
Krzysztof