[PATCH] dt-bindings: arm: mediatek: mmsys: refine power and gce properties
Jason-JH Lin
jason-jh.lin at mediatek.com
Thu Apr 28 21:10:13 PDT 2022
Hi Krzysztof,
Thanks for the reviews.
On Thu, 2022-04-28 at 09:16 +0200, Krzysztof Kozlowski wrote:
> On 28/04/2022 03:27, jason-jh.lin wrote:
> > From: "Jason-JH.Lin" <jason-jh.lin at mediatek.com>
> >
> > Power:
> > Refine description and add item number for power-domains
> > property.
> >
> > GCE:
> > Refine description and add item number for mboxes property and
> > mediatek,gce-client-reg property.
> >
> > Fixes: 1da90b8a7bae ("dt-bindings: arm: mediatek: mmsys: add power
> > and gce properties")
> > Signed-off-by: Jason-JH.Lin <jason-jh.lin at mediatek.com>
> > ---
> > .../bindings/arm/mediatek/mediatek,mmsys.yaml | 29 +++++++++----
> > ------
> > 1 file changed, 14 insertions(+), 15 deletions(-)
> >
> > diff --git
> > a/Documentation/devicetree/bindings/arm/mediatek/mediatek,mmsys.yam
> > l
> > b/Documentation/devicetree/bindings/arm/mediatek/mediatek,mmsys.yam
> > l
> > index 6ad023eec193..6722f1b724ef 100644
> > ---
> > a/Documentation/devicetree/bindings/arm/mediatek/mediatek,mmsys.yam
> > l
> > +++
> > b/Documentation/devicetree/bindings/arm/mediatek/mediatek,mmsys.yam
> > l
> > @@ -43,28 +43,27 @@ properties:
> > maxItems: 1
> >
> > power-domains:
> > + maxItems: 1
> > description:
> > - A phandle and PM domain specifier as defined by bindings
> > - of the power controller specified by phandle. See
> > - Documentation/devicetree/bindings/power/power-domain.yaml
> > for details.
> > + Each mmsys belongs to a power-domains. If mmsys wants to use
> > PM
> > + interface to control the power controller of mmsys, it
> > should have
> > + this property.
> >
> > mboxes:
> > + minItems: 1
>
> maxItems, surely you cannot have infinite number of mailboxes to talk
> with?
Yes, we cannot have infinite number for this, but we can use not only
one mbox channel for one mmsys.
Its maximum number is equal to GCE HW thread number.
The maximum number in mt8195 is 24 and mt8173 is 16.
But we currently using 1.
So I'm not sure if I need to set the maxItems for this?
>
> > description:
> > - Using mailbox to communicate with GCE, it should have this
> > - property and list of phandle, mailbox specifiers. See
> > - Documentation/devicetree/bindings/mailbox/mtk-gce.txt for
> > details.
> > - $ref: /schemas/types.yaml#/definitions/phandle-array
> > + If using mailbox to communicate with GCE, it should have
> > this
> > + property. GCE will help configure the hardware settings for
> > the
> > + current mmsys data pipeline.
> >
> > mediatek,gce-client-reg:
> > - description:
> > - The register of client driver can be configured by gce with
> > 4 arguments
> > - defined in this property, such as phandle of gce, subsys id,
> > - register offset and size.
> > - Each subsys id is mapping to a base address of display
> > function blocks
> > - register which is defined in the gce header
> > - include/dt-bindings/gce/<chip>-gce.h.
> > - $ref: /schemas/types.yaml#/definitions/phandle-array
>
> Why removing ref? Does your binding work after such change?
I removed it unexpectedly, I'll add it back.
>
> > maxItems: 1
> > + items:
> > + - items:
> > + - description: phandle to GCE
> > + - description: subsys id
> > + - description: register offset
> > + - description: register size
> >
> > "#clock-cells":
> > const: 1
>
>
> Best regards,
> Krzysztof
Regards,
Jason-JH.Lin
--
Jason-JH Lin <jason-jh.lin at mediatek.com>
More information about the Linux-mediatek
mailing list