[PATCH v10 3/6] ARM: dts: add clock support for Airoha EN7523

[Matthias Brugger]

On 14/03/2022 09:44, Felix Fietkau wrote:
> This driver only registers fixed rate clocks, since the clocks are fully
> initialized by the boot loader and should not be changed later, according
> to Airoha.
> 
> Signed-off-by: Felix Fietkau <nbd at nbd.name>

Applied, thanks!

> ---
>   arch/arm/boot/dts/en7523.dtsi | 8 ++++++++
>   1 file changed, 8 insertions(+)
> 
> diff --git a/arch/arm/boot/dts/en7523.dtsi b/arch/arm/boot/dts/en7523.dtsi
> index 36597f587f46..2e705b87b6c1 100644
> --- a/arch/arm/boot/dts/en7523.dtsi
> +++ b/arch/arm/boot/dts/en7523.dtsi
> @@ -3,6 +3,7 @@
>   #include <dt-bindings/interrupt-controller/irq.h>
>   #include <dt-bindings/interrupt-controller/arm-gic.h>
>   #include <dt-bindings/gpio/gpio.h>
> +#include <dt-bindings/clock/en7523-clk.h>
>   
>   / {
>   	interrupt-parent = <&gic>;
> @@ -83,6 +84,13 @@ L2_0: l2-cache0 {
>   		};
>   	};
>   
> +	scu: system-controller at 1fa20000 {
> +		compatible = "airoha,en7523-scu";
> +		reg = <0x1fa20000 0x400>,
> +		      <0x1fb00000 0x1000>;
> +		#clock-cells = <1>;
> +	};
> +
>   	gic: interrupt-controller at 9000000 {
>   		compatible = "arm,gic-v3";
>   		interrupt-controller;