[PATCH V2 11/12] clk: mediatek: reset: Add infra_ao reset support for MT8192

[Rex-BC Chen]

Hello Chen-Yu,

On Thu, 2022-04-21 at 14:53 +0800, Chen-Yu Tsai wrote:
> On Wed, Apr 20, 2022 at 9:05 PM Rex-BC Chen <rex-bc.chen at mediatek.com
> > wrote:
> > 
> > The infra_ao reset is needed for MT8192. Therefore, we add this
> > patch
> > to support it.
> > 
> > Signed-off-by: Rex-BC Chen <rex-bc.chen at mediatek.com>
> > ---
> >  drivers/clk/mediatek/clk-mt8192.c         | 11 +++++++++++
> >  include/dt-bindings/reset/mt8192-resets.h | 11 +++++++++++
> >  2 files changed, 22 insertions(+)
> > 
> > diff --git a/drivers/clk/mediatek/clk-mt8192.c
> > b/drivers/clk/mediatek/clk-mt8192.c
> > index ab27cd66b866..7926b83b9035 100644
> > --- a/drivers/clk/mediatek/clk-mt8192.c
> > +++ b/drivers/clk/mediatek/clk-mt8192.c
> > @@ -1114,6 +1114,13 @@ static const struct mtk_gate top_clks[] = {
> >         GATE_TOP(CLK_TOP_SSUSB_PHY_REF, "ssusb_phy_ref", "clk26m",
> > 25),
> >  };
> > 
> > +static const struct mtk_clk_rst_desc clk_rst_desc = {
> > +       .version = MTK_RST_SET_CLR,
> > +       .reg_num = 4,
> > +       .reg_ofs = 0x0,
> > +       .reset_n_cells = 2,
> 
> If you want to do this, you need to update the bindings first.

OK, I will add another patch for this.

> 
> > +};
> > +
> >  #define MT8192_PLL_FMAX                (3800UL * MHZ)
> >  #define MT8192_PLL_FMIN                (1500UL * MHZ)
> >  #define MT8192_INTEGER_BITS    8
> > @@ -1239,6 +1246,10 @@ static int clk_mt8192_infra_probe(struct
> > platform_device *pdev)
> >         if (r)
> >                 goto free_clk_data;
> > 
> > +       r = mtk_clk_register_rst_ctrl_with_dev(&pdev->dev,
> > &clk_rst_desc);
> > +       if (r)
> > +               goto free_clk_data;
> > +
> >         r = of_clk_add_provider(node, of_clk_src_onecell_get,
> > clk_data);
> >         if (r)
> >                 goto free_clk_data;
> > diff --git a/include/dt-bindings/reset/mt8192-resets.h
> > b/include/dt-bindings/reset/mt8192-resets.h
> > index be9a7ca245b9..feac1ac85906 100644
> > --- a/include/dt-bindings/reset/mt8192-resets.h
> > +++ b/include/dt-bindings/reset/mt8192-resets.h
> > @@ -7,6 +7,7 @@
> >  #ifndef _DT_BINDINGS_RESET_CONTROLLER_MT8192
> >  #define _DT_BINDINGS_RESET_CONTROLLER_MT8192
> > 
> > +/* TOPRGU */
> >  #define
> > MT8192_TOPRGU_MM_SW_RST                                        1
> >  #define MT8192_TOPRGU_MFG_SW_RST                               2
> >  #define MT8192_TOPRGU_VENC_SW_RST                              3
> > @@ -27,4 +28,14 @@
> > 
> >  #define MT8192_TOPRGU_SW_RST_NUM                               23
> > 
> > +/* INFRA RST0 */
> > +#define MT8192_INFRA_RST0_LVTS_AP_RST                          0
> > +/* INFRA RST2 */
> > +#define MT8192_INFRA_RST2_PCIE_PHY_RST                         15
> > +/* INFRA RST3 */
> > +#define MT8192_INFRA_RST3_PTP_RST                              5
> > +/* INFRA RST4 */
> > +#define MT8192_INFRA_RST4_LVTS_MCU                             12
> > +#define MT8192_INFRA_RST4_PCIE_TOP                             1
> > +
> 
> This change should be part of the binding change.
> 
> For these, please also add a patch for the actual device tree
> changes.
> 

OK, I will do this.

BRs,
Rex
> 
> ChenYu
> 
> >  #endif  /* _DT_BINDINGS_RESET_CONTROLLER_MT8192 */
> > --
> > 2.18.0
> >