[PATCH v2] drm/mediatek: dpi: Use mt8183 output formats for mt8192

[Rex-BC Chen]

On Thu, 2022-04-07 at 21:39 -0400, Nícolas F. R. A. Prado wrote:
> The configuration for mt8192 was incorrectly using the output formats
> from mt8173. Since the output formats for mt8192 are instead the same
> ones as for mt8183, which require two bus samples per pixel, the
> pixelclock and DDR edge setting were misconfigured. This made
> external
> displays unable to show the image.
> 
> Fix the issue by correcting the output format for mt8192 to be the
> same
> as for mt8183, fixing the usage of external displays for mt8192.
> 
> Fixes: be63f6e8601f ("drm/mediatek: dpi: Add output bus formats to
> driver data")
> Signed-off-by: Nícolas F. R. A. Prado <nfraprado at collabora.com>
> Reviewed-by: AngeloGioacchino Del Regno <
> angelogioacchino.delregno at collabora.com>
> ---
> 
> Changes in v2:
> - Added Fixes tag
> 
>  drivers/gpu/drm/mediatek/mtk_dpi.c | 4 ++--
>  1 file changed, 2 insertions(+), 2 deletions(-)
> 
> diff --git a/drivers/gpu/drm/mediatek/mtk_dpi.c
> b/drivers/gpu/drm/mediatek/mtk_dpi.c
> index 4554e2de1430..e61cd67b978f 100644
> --- a/drivers/gpu/drm/mediatek/mtk_dpi.c
> +++ b/drivers/gpu/drm/mediatek/mtk_dpi.c
> @@ -819,8 +819,8 @@ static const struct mtk_dpi_conf mt8192_conf = {
>  	.cal_factor = mt8183_calculate_factor,
>  	.reg_h_fre_con = 0xe0,
>  	.max_clock_khz = 150000,
> -	.output_fmts = mt8173_output_fmts,
> -	.num_output_fmts = ARRAY_SIZE(mt8173_output_fmts),
> +	.output_fmts = mt8183_output_fmts,
> +	.num_output_fmts = ARRAY_SIZE(mt8183_output_fmts),
>  };
>  
>  static int mtk_dpi_probe(struct platform_device *pdev)

Reviewed-by: Rex-BC Chen <rex-bc.chen at mediatek.com>

Hello CK,

Gentle ping for this patch.
This patch is confirmed by Xinlei and Jitao.

BRs,
Rex