[PATCH v16 6/6] soc: mediatek: mutex: add functions that operate registers by CMDQ

Moudy Ho moudy.ho at mediatek.com
Mon Apr 18 01:30:18 PDT 2022


Due to HW limitations, MDP3 is necessary to enable MUTEX in each frame
for SOF triggering and cooperate with CMDQ control to reduce the amount
of interrupts generated(also, reduce frame latency).

In response to the above situation, a new interface
"mtk_mutex_enable_by_cmdq" has been added to achieve the purpose.

Signed-off-by: Moudy Ho <moudy.ho at mediatek.com>
---
 drivers/soc/mediatek/mtk-mutex.c       | 44 +++++++++++++++++++++++++-
 include/linux/soc/mediatek/mtk-mutex.h |  2 ++
 2 files changed, 45 insertions(+), 1 deletion(-)

diff --git a/drivers/soc/mediatek/mtk-mutex.c b/drivers/soc/mediatek/mtk-mutex.c
index 92afdee14d43..4a3b11d31581 100644
--- a/drivers/soc/mediatek/mtk-mutex.c
+++ b/drivers/soc/mediatek/mtk-mutex.c
@@ -7,10 +7,12 @@
 #include <linux/iopoll.h>
 #include <linux/module.h>
 #include <linux/of_device.h>
+#include <linux/of_address.h>
 #include <linux/platform_device.h>
 #include <linux/regmap.h>
 #include <linux/soc/mediatek/mtk-mmsys.h>
 #include <linux/soc/mediatek/mtk-mutex.h>
+#include <linux/soc/mediatek/mtk-cmdq.h>
 
 #define MT2701_MUTEX0_MOD0			0x2c
 #define MT2701_MUTEX0_SOF0			0x30
@@ -176,6 +178,9 @@ struct mtk_mutex_ctx {
 	void __iomem			*regs;
 	struct mtk_mutex		mutex[10];
 	const struct mtk_mutex_data	*data;
+	phys_addr_t			addr;
+	struct cmdq_client_reg		cmdq_reg;
+	bool				has_gce_client_reg;
 };
 
 static const unsigned int mt2701_mutex_mod[DDP_COMPONENT_ID_MAX] = {
@@ -531,6 +536,30 @@ void mtk_mutex_enable(struct mtk_mutex *mutex)
 }
 EXPORT_SYMBOL_GPL(mtk_mutex_enable);
 
+int mtk_mutex_enable_by_cmdq(struct mtk_mutex *mutex, void *pkt)
+{
+#if IS_REACHABLE(CONFIG_MTK_CMDQ)
+	struct mtk_mutex_ctx *mtx = container_of(mutex, struct mtk_mutex_ctx,
+						 mutex[mutex->id]);
+	struct cmdq_pkt *cmdq_pkt = (struct cmdq_pkt *)pkt;
+
+	WARN_ON(&mtx->mutex[mutex->id] != mutex);
+
+	if (!mtx->has_gce_client_reg) {
+		dev_err(mtx->dev, "mediatek,gce-client-reg hasn't been set in dts");
+		return -EINVAL;
+	}
+
+	cmdq_pkt_write(cmdq_pkt, mtx->cmdq_reg.subsys,
+		       mtx->addr + DISP_REG_MUTEX_EN(mutex->id), 1);
+	return 0;
+#else
+	dev_err(mtx->dev, "Not support for enable MUTEX by CMDQ");
+	return -ENODEV;
+#endif
+}
+EXPORT_SYMBOL_GPL(mtk_mutex_enable_by_cmdq);
+
 void mtk_mutex_disable(struct mtk_mutex *mutex)
 {
 	struct mtk_mutex_ctx *mtx = container_of(mutex, struct mtk_mutex_ctx,
@@ -655,7 +684,7 @@ static int mtk_mutex_probe(struct platform_device *pdev)
 {
 	struct device *dev = &pdev->dev;
 	struct mtk_mutex_ctx *mtx;
-	struct resource *regs;
+	struct resource *regs, addr;
 	int i;
 
 	mtx = devm_kzalloc(dev, sizeof(*mtx), GFP_KERNEL);
@@ -676,6 +705,19 @@ static int mtk_mutex_probe(struct platform_device *pdev)
 		}
 	}
 
+	if (of_address_to_resource(dev->of_node, 0, &addr) < 0)
+		mtx->addr = 0L;
+	else
+		mtx->addr = addr.start;
+
+#if IS_REACHABLE(CONFIG_MTK_CMDQ)
+	ret = cmdq_dev_get_client_reg(dev, &mtx->cmdq_reg, 0);
+	if (ret)
+		dev_dbg(dev, "No mediatek,gce-client-reg!\n");
+	else
+		mtx->has_gce_client_reg = true;
+#endif
+
 	regs = platform_get_resource(pdev, IORESOURCE_MEM, 0);
 	mtx->regs = devm_ioremap_resource(dev, regs);
 	if (IS_ERR(mtx->regs)) {
diff --git a/include/linux/soc/mediatek/mtk-mutex.h b/include/linux/soc/mediatek/mtk-mutex.h
index f174452212d6..80425ae19fb7 100644
--- a/include/linux/soc/mediatek/mtk-mutex.h
+++ b/include/linux/soc/mediatek/mtk-mutex.h
@@ -29,6 +29,8 @@ int mtk_mutex_prepare(struct mtk_mutex *mutex);
 void mtk_mutex_add_comp(struct mtk_mutex *mutex,
 			enum mtk_ddp_comp_id id);
 void mtk_mutex_enable(struct mtk_mutex *mutex);
+int mtk_mutex_enable_by_cmdq(struct mtk_mutex *mutex,
+			     void *pkt);
 void mtk_mutex_disable(struct mtk_mutex *mutex);
 void mtk_mutex_remove_comp(struct mtk_mutex *mutex,
 			   enum mtk_ddp_comp_id id);
-- 
2.18.0




More information about the Linux-mediatek mailing list