[PATCH v16 01/22] dt-bindings: mediatek: add vdosys1 RDMA definition for mt8195

[Nancy.Lin]

Hi CK,

Thanks for the review.

On Mon, 2022-03-21 at 17:52 +0800, CK Hu wrote:
> Hi, Nancy:
> 
> On Fri, 2022-03-18 at 22:19 +0800, Nancy.Lin wrote:
> > Add vdosys1 RDMA definition.
> 
> See my review comment in v14 [1].
> 
> [1] 
> 
https://patchwork.kernel.org/project/linux-mediatek/patch/20220310035515.16881-2-nancy.lin@mediatek.com/
> 
> Regards,
> CK
> 
Sorry for missing your comment. The VDO1 MDP_RDMA is not totally
compatible with mdp3-rdma[1]. Both compression support and tile size
are different. I will move the binding yaml in the right place.

[1] 

https://patchwork.kernel.org/project/linux-mediatek/patch/20220117055254.9777-15-roy-cw.yeh@mediatek.com/

Regards,
Nancy

> > 
> > Signed-off-by: Nancy.Lin <nancy.lin at mediatek.com>
> > Reviewed-by: AngeloGioacchino Del Regno <
> > angelogioacchino.delregno at collabora.com>
> > ---
> >  .../arm/mediatek/mediatek,mdp-rdma.yaml       | 86
> > +++++++++++++++++++
> >  1 file changed, 86 insertions(+)
> >  create mode 100644
> > Documentation/devicetree/bindings/arm/mediatek/mediatek,mdp-
> > rdma.yaml
> > 
> > diff --git
> > a/Documentation/devicetree/bindings/arm/mediatek/mediatek,mdp-
> > rdma.yaml
> > b/Documentation/devicetree/bindings/arm/mediatek/mediatek,mdp-
> > rdma.yaml
> > new file mode 100644
> > index 000000000000..6ab773569462
> > --- /dev/null
> > +++ b/Documentation/devicetree/bindings/arm/mediatek/mediatek,mdp-
> > rdma.yaml
> > @@ -0,0 +1,86 @@
> > +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> > +%YAML 1.2
> > +---
> > +$id: 
> > 
https://urldefense.com/v3/__http://devicetree.org/schemas/arm/mediatek/mediatek,mdp-rdma.yaml*__;Iw!!CTRNKA9wMg0ARbw!wJXD2xhE7TC3ASmUW1ftsqaOyZ8KrCjFHeXywwGFdNi56kNKasQxnWfzt81DUQ$
> >  
> > +$schema: 
> > 
https://urldefense.com/v3/__http://devicetree.org/meta-schemas/core.yaml*__;Iw!!CTRNKA9wMg0ARbw!wJXD2xhE7TC3ASmUW1ftsqaOyZ8KrCjFHeXywwGFdNi56kNKasQxnWcP0BMRuw$
> >  
> > +
> > +title: Mediatek MDP RDMA
> > +
> > +maintainers:
> > +  - Matthias Brugger <matthias.bgg at gmail.com>
> > +
> > +description: |
> > +  The mediatek MDP RDMA stands for Read Direct Memory Access.
> > +  It provides real time data to the back-end panel driver, such as
> > DSI,
> > +  DPI and DP_INTF.
> > +  It contains one line buffer to store the sufficient pixel data.
> > +  RDMA device node must be siblings to the central MMSYS_CONFIG
> > node.
> > +  For a description of the MMSYS_CONFIG binding, see
> > +  Documentation/devicetree/bindings/arm/mediatek/mediatek,mmsys.ya
> > ml
> > for details.
> > +
> > +properties:
> > +  compatible:
> > +    oneOf:
> > +      - items:
> > +          - const: mediatek,mt8195-vdo1-rdma
> > +
> > +  reg:
> > +    maxItems: 1
> > +
> > +  interrupts:
> > +    maxItems: 1
> > +
> > +  power-domains:
> > +    description: A phandle and PM domain specifier as defined by
> > bindings of
> > +      the power controller specified by phandle. See
> > +      Documentation/devicetree/bindings/power/power-domain.yaml
> > for
> > details.
> > +
> > +  clocks:
> > +    items:
> > +      - description: RDMA Clock
> > +
> > +  iommus:
> > +    description:
> > +      This property should point to the respective IOMMU block
> > with
> > master port as argument,
> > +      see
> > Documentation/devicetree/bindings/iommu/mediatek,iommu.yaml for
> > details.
> > +
> > +  mediatek,gce-client-reg:
> > +    description:
> > +      The register of display function block to be set by gce.
> > There
> > are 4 arguments,
> > +      such as gce node, subsys id, offset and register size. The
> > subsys id that is
> > +      mapping to the register of display function blocks is
> > defined
> > in the gce header
> > +      include/include/dt-bindings/gce/<chip>-gce.h of each chips.
> > +    $ref: /schemas/types.yaml#/definitions/phandle-array
> > +    maxItems: 1
> > +
> > +required:
> > +  - compatible
> > +  - reg
> > +  - power-domains
> > +  - clocks
> > +  - iommus
> > +
> > +additionalProperties: false
> > +
> > +examples:
> > +  - |
> > +    #include <dt-bindings/interrupt-controller/arm-gic.h>
> > +    #include <dt-bindings/clock/mt8195-clk.h>
> > +    #include <dt-bindings/power/mt8195-power.h>
> > +    #include <dt-bindings/gce/mt8195-gce.h>
> > +    #include <dt-bindings/memory/mt8195-memory-port.h>
> > +
> > +    soc {
> > +        #address-cells = <2>;
> > +        #size-cells = <2>;
> > +
> > +        vdo1_rdma0: mdp-rdma at 1c104000 {
> > +            compatible = "mediatek,mt8195-vdo1-rdma";
> > +            reg = <0 0x1c104000 0 0x1000>;
> > +            interrupts = <GIC_SPI 495 IRQ_TYPE_LEVEL_HIGH 0>;
> > +            clocks = <&vdosys1 CLK_VDO1_MDP_RDMA0>;
> > +            power-domains = <&spm MT8195_POWER_DOMAIN_VDOSYS1>;
> > +            iommus = <&iommu_vdo M4U_PORT_L2_MDP_RDMA0>;
> > +            mediatek,gce-client-reg = <&gce0 SUBSYS_1c10XXXX
> > 0x4000
> > 0x1000>;
> > +        };
> > +    };
> 
>