[PATCH V3 03/15] cpufreq: mediatek: Replace old_* with pre_*

Rex-BC Chen rex-bc.chen at mediatek.com
Thu Apr 14 22:59:04 PDT 2022


To make driver more readable, replace old_* with pre_*.

Signed-off-by: Rex-BC Chen <rex-bc.chen at mediatek.com>
---
 drivers/cpufreq/mediatek-cpufreq.c | 84 +++++++++++++++---------------
 1 file changed, 42 insertions(+), 42 deletions(-)

diff --git a/drivers/cpufreq/mediatek-cpufreq.c b/drivers/cpufreq/mediatek-cpufreq.c
index e040f3574af9..ff27f77e8ee6 100644
--- a/drivers/cpufreq/mediatek-cpufreq.c
+++ b/drivers/cpufreq/mediatek-cpufreq.c
@@ -61,18 +61,18 @@ static int mtk_cpufreq_voltage_tracking(struct mtk_cpu_dvfs_info *info,
 {
 	struct regulator *proc_reg = info->proc_reg;
 	struct regulator *sram_reg = info->sram_reg;
-	int old_vproc, old_vsram, new_vsram, vsram, vproc, ret;
+	int pre_vproc, pre_vsram, new_vsram, vsram, vproc, ret;
 
-	old_vproc = regulator_get_voltage(proc_reg);
-	if (old_vproc < 0) {
+	pre_vproc = regulator_get_voltage(proc_reg);
+	if (pre_vproc < 0) {
 		dev_err(info->cpu_dev,
-			"invalid Vproc value: %d\n", old_vproc);
-		return old_vproc;
+			"invalid Vproc value: %d\n", pre_vproc);
+		return pre_vproc;
 	}
 	/* Vsram should not exceed the maximum allowed voltage of SoC. */
 	new_vsram = min(new_vproc + MIN_VOLT_SHIFT, MAX_VOLT_LIMIT);
 
-	if (old_vproc < new_vproc) {
+	if (pre_vproc < new_vproc) {
 		/*
 		 * When scaling up voltages, Vsram and Vproc scale up step
 		 * by step. At each step, set Vsram to (Vproc + 200mV) first,
@@ -80,20 +80,20 @@ static int mtk_cpufreq_voltage_tracking(struct mtk_cpu_dvfs_info *info,
 		 * Keep doing it until Vsram and Vproc hit target voltages.
 		 */
 		do {
-			old_vsram = regulator_get_voltage(sram_reg);
-			if (old_vsram < 0) {
+			pre_vsram = regulator_get_voltage(sram_reg);
+			if (pre_vsram < 0) {
 				dev_err(info->cpu_dev,
-					"invalid Vsram value: %d\n", old_vsram);
-				return old_vsram;
+					"invalid Vsram value: %d\n", pre_vsram);
+				return pre_vsram;
 			}
-			old_vproc = regulator_get_voltage(proc_reg);
-			if (old_vproc < 0) {
+			pre_vproc = regulator_get_voltage(proc_reg);
+			if (pre_vproc < 0) {
 				dev_err(info->cpu_dev,
-					"invalid Vproc value: %d\n", old_vproc);
-				return old_vproc;
+					"invalid Vproc value: %d\n", pre_vproc);
+				return pre_vproc;
 			}
 
-			vsram = min(new_vsram, old_vproc + MAX_VOLT_SHIFT);
+			vsram = min(new_vsram, pre_vproc + MAX_VOLT_SHIFT);
 
 			if (vsram + VOLT_TOL >= MAX_VOLT_LIMIT) {
 				vsram = MAX_VOLT_LIMIT;
@@ -122,12 +122,12 @@ static int mtk_cpufreq_voltage_tracking(struct mtk_cpu_dvfs_info *info,
 			ret = regulator_set_voltage(proc_reg, vproc,
 						    vproc + VOLT_TOL);
 			if (ret) {
-				regulator_set_voltage(sram_reg, old_vsram,
-						      old_vsram);
+				regulator_set_voltage(sram_reg, pre_vsram,
+						      pre_vsram);
 				return ret;
 			}
 		} while (vproc < new_vproc || vsram < new_vsram);
-	} else if (old_vproc > new_vproc) {
+	} else if (pre_vproc > new_vproc) {
 		/*
 		 * When scaling down voltages, Vsram and Vproc scale down step
 		 * by step. At each step, set Vproc to (Vsram - 200mV) first,
@@ -135,20 +135,20 @@ static int mtk_cpufreq_voltage_tracking(struct mtk_cpu_dvfs_info *info,
 		 * Keep doing it until Vsram and Vproc hit target voltages.
 		 */
 		do {
-			old_vproc = regulator_get_voltage(proc_reg);
-			if (old_vproc < 0) {
+			pre_vproc = regulator_get_voltage(proc_reg);
+			if (pre_vproc < 0) {
 				dev_err(info->cpu_dev,
-					"invalid Vproc value: %d\n", old_vproc);
-				return old_vproc;
+					"invalid Vproc value: %d\n", pre_vproc);
+				return pre_vproc;
 			}
-			old_vsram = regulator_get_voltage(sram_reg);
-			if (old_vsram < 0) {
+			pre_vsram = regulator_get_voltage(sram_reg);
+			if (pre_vsram < 0) {
 				dev_err(info->cpu_dev,
-					"invalid Vsram value: %d\n", old_vsram);
-				return old_vsram;
+					"invalid Vsram value: %d\n", pre_vsram);
+				return pre_vsram;
 			}
 
-			vproc = max(new_vproc, old_vsram - MAX_VOLT_SHIFT);
+			vproc = max(new_vproc, pre_vsram - MAX_VOLT_SHIFT);
 			ret = regulator_set_voltage(proc_reg, vproc,
 						    vproc + VOLT_TOL);
 			if (ret)
@@ -178,8 +178,8 @@ static int mtk_cpufreq_voltage_tracking(struct mtk_cpu_dvfs_info *info,
 			}
 
 			if (ret) {
-				regulator_set_voltage(proc_reg, old_vproc,
-						      old_vproc);
+				regulator_set_voltage(proc_reg, pre_vproc,
+						      pre_vproc);
 				return ret;
 			}
 		} while (vproc > new_vproc + VOLT_TOL ||
@@ -207,16 +207,16 @@ static int mtk_cpufreq_set_target(struct cpufreq_policy *policy,
 	struct mtk_cpu_dvfs_info *info = policy->driver_data;
 	struct device *cpu_dev = info->cpu_dev;
 	struct dev_pm_opp *opp;
-	long freq_hz, old_freq_hz;
-	int vproc, old_vproc, inter_vproc, target_vproc, ret;
+	long freq_hz, pre_freq_hz;
+	int vproc, pre_vproc, inter_vproc, target_vproc, ret;
 
 	inter_vproc = info->intermediate_voltage;
 
-	old_freq_hz = clk_get_rate(cpu_clk);
-	old_vproc = regulator_get_voltage(info->proc_reg);
-	if (old_vproc < 0) {
-		dev_err(cpu_dev, "invalid Vproc value: %d\n", old_vproc);
-		return old_vproc;
+	pre_freq_hz = clk_get_rate(cpu_clk);
+	pre_vproc = regulator_get_voltage(info->proc_reg);
+	if (pre_vproc < 0) {
+		dev_err(cpu_dev, "invalid Vproc value: %d\n", pre_vproc);
+		return pre_vproc;
 	}
 
 	freq_hz = freq_table[index].frequency * 1000;
@@ -235,12 +235,12 @@ static int mtk_cpufreq_set_target(struct cpufreq_policy *policy,
 	 * current voltage, scale up voltage first.
 	 */
 	target_vproc = (inter_vproc > vproc) ? inter_vproc : vproc;
-	if (old_vproc < target_vproc) {
+	if (pre_vproc < target_vproc) {
 		ret = mtk_cpufreq_set_voltage(info, target_vproc);
 		if (ret) {
 			dev_err(cpu_dev,
 				"cpu%d: failed to scale up voltage!\n", policy->cpu);
-			mtk_cpufreq_set_voltage(info, old_vproc);
+			mtk_cpufreq_set_voltage(info, pre_vproc);
 			return ret;
 		}
 	}
@@ -250,7 +250,7 @@ static int mtk_cpufreq_set_target(struct cpufreq_policy *policy,
 	if (ret) {
 		dev_err(cpu_dev,
 			"cpu%d: failed to re-parent cpu clock!\n", policy->cpu);
-		mtk_cpufreq_set_voltage(info, old_vproc);
+		mtk_cpufreq_set_voltage(info, pre_vproc);
 		WARN_ON(1);
 		return ret;
 	}
@@ -261,7 +261,7 @@ static int mtk_cpufreq_set_target(struct cpufreq_policy *policy,
 		dev_err(cpu_dev,
 			"cpu%d: failed to scale cpu clock rate!\n", policy->cpu);
 		clk_set_parent(cpu_clk, armpll);
-		mtk_cpufreq_set_voltage(info, old_vproc);
+		mtk_cpufreq_set_voltage(info, pre_vproc);
 		return ret;
 	}
 
@@ -279,13 +279,13 @@ static int mtk_cpufreq_set_target(struct cpufreq_policy *policy,
 	 * If the new voltage is lower than the intermediate voltage or the
 	 * original voltage, scale down to the new voltage.
 	 */
-	if (vproc < inter_vproc || vproc < old_vproc) {
+	if (vproc < inter_vproc || vproc < pre_vproc) {
 		ret = mtk_cpufreq_set_voltage(info, vproc);
 		if (ret) {
 			dev_err(cpu_dev,
 				"cpu%d: failed to scale down voltage!\n", policy->cpu);
 			clk_set_parent(cpu_clk, info->inter_clk);
-			clk_set_rate(armpll, old_freq_hz);
+			clk_set_rate(armpll, pre_freq_hz);
 			clk_set_parent(cpu_clk, armpll);
 			return ret;
 		}
-- 
2.18.0




More information about the Linux-mediatek mailing list