[PATCH v4, 2/4] drm/mediatek: Separate poweron/poweroff from enable/disable and define new funcs
CK Hu
ck.hu at mediatek.com
Wed Apr 13 00:31:31 PDT 2022
Hi, Xinlei:
On Mon, 2022-04-11 at 10:31 +0800, xinlei.lee at mediatek.com wrote:
> From: Jitao Shi <jitao.shi at mediatek.com>
>
> In order to match the changes of "Use the drm_panel_bridge API",
> the poweron/poweroff of dsi is extracted from enable/disable and
> defined as new funcs (pre_enable/post_disable).
>
> Fixes: 2dd8075d2185 ("drm/mediatek: mtk_dsi: Use the drm_panel_bridge
> API")
>
> Signed-off-by: Jitao Shi <jitao.shi at mediatek.com>
> Signed-off-by: Xinlei Lee <xinlei.lee at mediatek.com>
> ---
> drivers/gpu/drm/mediatek/mtk_dsi.c | 51 +++++++++++++++++++---------
> --
> 1 file changed, 32 insertions(+), 19 deletions(-)
>
> diff --git a/drivers/gpu/drm/mediatek/mtk_dsi.c
> b/drivers/gpu/drm/mediatek/mtk_dsi.c
> index 262c027d8c2f..cf76c53a1af6 100644
> --- a/drivers/gpu/drm/mediatek/mtk_dsi.c
> +++ b/drivers/gpu/drm/mediatek/mtk_dsi.c
> @@ -679,16 +679,6 @@ static void mtk_dsi_poweroff(struct mtk_dsi
> *dsi)
> if (--dsi->refcount != 0)
> return;
>
> - /*
> - * mtk_dsi_stop() and mtk_dsi_start() is asymmetric, since
> - * mtk_dsi_stop() should be called after
> mtk_drm_crtc_atomic_disable(),
> - * which needs irq for vblank, and mtk_dsi_stop() will disable
> irq.
> - * mtk_dsi_start() needs to be called in
> mtk_output_dsi_enable(),
> - * after dsi is fully set.
> - */
> - mtk_dsi_stop(dsi);
> -
> - mtk_dsi_switch_to_cmd_mode(dsi, VM_DONE_INT_FLAG, 500);
> mtk_dsi_reset_engine(dsi);
> mtk_dsi_lane0_ulp_mode_enter(dsi);
> mtk_dsi_clk_ulp_mode_enter(dsi);
> @@ -703,17 +693,9 @@ static void mtk_dsi_poweroff(struct mtk_dsi
> *dsi)
>
> static void mtk_output_dsi_enable(struct mtk_dsi *dsi)
> {
> - int ret;
> -
> if (dsi->enabled)
> return;
>
> - ret = mtk_dsi_poweron(dsi);
> - if (ret < 0) {
> - DRM_ERROR("failed to power on dsi\n");
> - return;
> - }
> -
> mtk_dsi_set_mode(dsi);
> mtk_dsi_clk_hs_mode(dsi, 1);
>
> @@ -727,7 +709,16 @@ static void mtk_output_dsi_disable(struct
> mtk_dsi *dsi)
> if (!dsi->enabled)
> return;
>
> - mtk_dsi_poweroff(dsi);
> + /*
> + * mtk_dsi_stop() and mtk_dsi_start() is asymmetric, since
> + * mtk_dsi_stop() should be called after
> mtk_drm_crtc_atomic_disable(),
> + * which needs irq for vblank, and mtk_dsi_stop() will disable
> irq.
> + * mtk_dsi_start() needs to be called in
> mtk_output_dsi_enable(),
> + * after dsi is fully set.
> + */
> + mtk_dsi_stop(dsi);
> +
> + mtk_dsi_switch_to_cmd_mode(dsi, VM_DONE_INT_FLAG, 500);
>
> dsi->enabled = false;
> }
> @@ -762,13 +753,35 @@ static void mtk_dsi_bridge_enable(struct
> drm_bridge *bridge)
> {
> struct mtk_dsi *dsi = bridge_to_dsi(bridge);
>
> + if (dsi->refcount == 0)
> + return;
> +
> mtk_output_dsi_enable(dsi);
> }
>
> +static void mtk_dsi_bridge_pre_enable(struct drm_bridge *bridge)
> +{
> + struct mtk_dsi *dsi = bridge_to_dsi(bridge);
> + int ret;
> +
> + ret = mtk_dsi_poweron(dsi);
> + if (ret < 0)
> + DRM_ERROR("failed to power on dsi\n");
> +}
> +
> +static void mtk_dsi_bridge_post_disable(struct drm_bridge *bridge)
> +{
> + struct mtk_dsi *dsi = bridge_to_dsi(bridge);
> +
> + mtk_dsi_poweroff(dsi);
> +}
> +
> static const struct drm_bridge_funcs mtk_dsi_bridge_funcs = {
> .attach = mtk_dsi_bridge_attach,
> .disable = mtk_dsi_bridge_disable,
> .enable = mtk_dsi_bridge_enable,
> + .pre_enable = mtk_dsi_bridge_pre_enable,
The flow looks good to me, but according to [1], pre_enable is
deprecated. Use atomic_pre_enable instead.
[1]
https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/tree/include/drm/drm_bridge.h?h=v5.18-rc2#n235
> + .post_disable = mtk_dsi_bridge_post_disable,
Ditto.
Regards,
CK
> .mode_set = mtk_dsi_bridge_mode_set,
> };
>
More information about the Linux-mediatek
mailing list