[PATCH V2 06/15] cpufreq: mediatek: Record previous target vproc value

[Rex-BC Chen]

From: Jia-Wei Chang <jia-wei.chang at mediatek.com>

We found the buck voltage may not be exactly the same with what we set
because CPU may share the same buck with other module.
Therefore, we need to record the previous desired value instead of reading
it from regulators.

Signed-off-by: Andrew-sh.Cheng <andrew-sh.cheng at mediatek.com>
Signed-off-by: Jia-Wei Chang <jia-wei.chang at mediatek.com>
---
 drivers/cpufreq/mediatek-cpufreq.c | 31 +++++++++++++++++++-----------
 1 file changed, 20 insertions(+), 11 deletions(-)

diff --git a/drivers/cpufreq/mediatek-cpufreq.c b/drivers/cpufreq/mediatek-cpufreq.c
index dc4a87e68940..472f4de29e5f 100644
--- a/drivers/cpufreq/mediatek-cpufreq.c
+++ b/drivers/cpufreq/mediatek-cpufreq.c
@@ -40,6 +40,7 @@ struct mtk_cpu_dvfs_info {
 	struct list_head list_head;
 	int intermediate_voltage;
 	bool need_voltage_tracking;
+	int old_vproc;
 };
 
 static LIST_HEAD(dvfs_info_list);
@@ -190,11 +191,17 @@ static int mtk_cpufreq_voltage_tracking(struct mtk_cpu_dvfs_info *info,
 
 static int mtk_cpufreq_set_voltage(struct mtk_cpu_dvfs_info *info, int vproc)
 {
+	int ret;
+
 	if (info->need_voltage_tracking)
-		return mtk_cpufreq_voltage_tracking(info, vproc);
+		ret = mtk_cpufreq_voltage_tracking(info, vproc);
 	else
-		return regulator_set_voltage(info->proc_reg, vproc,
-					     vproc + VOLT_TOL);
+		ret = regulator_set_voltage(info->proc_reg, vproc,
+					    MAX_VOLT_LIMIT);
+	if (!ret)
+		info->old_vproc = vproc;
+
+	return ret;
 }
 
 static int mtk_cpufreq_set_target(struct cpufreq_policy *policy,
@@ -211,15 +218,7 @@ static int mtk_cpufreq_set_target(struct cpufreq_policy *policy,
 
 	inter_vproc = info->intermediate_voltage;
 
-	old_freq_hz = clk_get_rate(cpu_clk);
-	old_vproc = regulator_get_voltage(info->proc_reg);
-	if (old_vproc < 0) {
-		pr_err("%s: invalid Vproc value: %d\n", __func__, old_vproc);
-		return old_vproc;
-	}
-
 	freq_hz = freq_table[index].frequency * 1000;
-
 	opp = dev_pm_opp_find_freq_ceil(cpu_dev, &freq_hz);
 	if (IS_ERR(opp)) {
 		pr_err("cpu%d: failed to find OPP for %ld\n",
@@ -229,6 +228,16 @@ static int mtk_cpufreq_set_target(struct cpufreq_policy *policy,
 	vproc = dev_pm_opp_get_voltage(opp);
 	dev_pm_opp_put(opp);
 
+	old_freq_hz = clk_get_rate(cpu_clk);
+	old_vproc = info->old_vproc;
+	if (old_vproc == 0)
+		old_vproc = regulator_get_voltage(info->proc_reg);
+	if (old_vproc < 0) {
+		dev_err(cpu_dev, "%s: invalid Vproc value: %d\n",
+			__func__, old_vproc);
+		return old_vproc;
+	}
+
 	/*
 	 * If the new voltage or the intermediate voltage is higher than the
 	 * current voltage, scale up voltage first.
-- 
2.18.0