[PATCH v2 13/14] net: ethernet: mtk_eth_soc: remove bridge flow offload type entry support

[Felix Fietkau]

According to MediaTek, this feature is not supported in current hardware

Signed-off-by: Felix Fietkau <nbd at nbd.name>
---
 drivers/net/ethernet/mediatek/mtk_ppe.c         | 8 --------
 drivers/net/ethernet/mediatek/mtk_ppe_debugfs.c | 1 -
 2 files changed, 9 deletions(-)

diff --git a/drivers/net/ethernet/mediatek/mtk_ppe.c b/drivers/net/ethernet/mediatek/mtk_ppe.c
index a7fe33bbde63..aa0d190db65d 100644
--- a/drivers/net/ethernet/mediatek/mtk_ppe.c
+++ b/drivers/net/ethernet/mediatek/mtk_ppe.c
@@ -84,13 +84,6 @@ static u32 mtk_ppe_hash_entry(struct mtk_foe_entry *e)
 	u32 hash;
 
 	switch (FIELD_GET(MTK_FOE_IB1_PACKET_TYPE, e->ib1)) {
-		case MTK_PPE_PKT_TYPE_BRIDGE:
-			hv1 = e->bridge.src_mac_lo;
-			hv1 ^= ((e->bridge.src_mac_hi & 0xffff) << 16);
-			hv2 = e->bridge.src_mac_hi >> 16;
-			hv2 ^= e->bridge.dest_mac_lo;
-			hv3 = e->bridge.dest_mac_hi;
-			break;
 		case MTK_PPE_PKT_TYPE_IPV4_ROUTE:
 		case MTK_PPE_PKT_TYPE_IPV4_HNAPT:
 			hv1 = e->ipv4.orig.ports;
@@ -572,7 +565,6 @@ int mtk_ppe_start(struct mtk_ppe *ppe)
 	      MTK_PPE_FLOW_CFG_IP4_NAT |
 	      MTK_PPE_FLOW_CFG_IP4_NAPT |
 	      MTK_PPE_FLOW_CFG_IP4_DSLITE |
-	      MTK_PPE_FLOW_CFG_L2_BRIDGE |
 	      MTK_PPE_FLOW_CFG_IP4_NAT_FRAG;
 	ppe_w32(ppe, MTK_PPE_FLOW_CFG, val);
 
diff --git a/drivers/net/ethernet/mediatek/mtk_ppe_debugfs.c b/drivers/net/ethernet/mediatek/mtk_ppe_debugfs.c
index d4b482340cb9..eb0b598f14e4 100644
--- a/drivers/net/ethernet/mediatek/mtk_ppe_debugfs.c
+++ b/drivers/net/ethernet/mediatek/mtk_ppe_debugfs.c
@@ -32,7 +32,6 @@ static const char *mtk_foe_pkt_type_str(int type)
 	static const char * const type_str[] = {
 		[MTK_PPE_PKT_TYPE_IPV4_HNAPT] = "IPv4 5T",
 		[MTK_PPE_PKT_TYPE_IPV4_ROUTE] = "IPv4 3T",
-		[MTK_PPE_PKT_TYPE_BRIDGE] = "L2",
 		[MTK_PPE_PKT_TYPE_IPV4_DSLITE] = "DS-LITE",
 		[MTK_PPE_PKT_TYPE_IPV6_ROUTE_3T] = "IPv6 3T",
 		[MTK_PPE_PKT_TYPE_IPV6_ROUTE_5T] = "IPv6 5T",
-- 
2.35.1