[RESEND][PATCH 3/8] PM: EM: Use the new .get_cost() callback while registering EM
Ionela Voinescu
ionela.voinescu at arm.com
Mon Apr 4 09:01:45 PDT 2022
Hi Lukasz,
On Monday 21 Mar 2022 at 09:57:24 (+0000), Lukasz Luba wrote:
> The Energy Model (EM) allows to provide the 'cost' values when the device
> driver provides the .get_cost() optional callback. This removes
> restriction which is in the EM calculation function of the 'cost'
> for each performance state. Now, the driver is in charge of providing
> the right values which are then used by Energy Aware Scheduler.
>
> Signed-off-by: Lukasz Luba <lukasz.luba at arm.com>
> ---
> kernel/power/energy_model.c | 39 ++++++++++++++++++++++++++-----------
> 1 file changed, 28 insertions(+), 11 deletions(-)
>
> diff --git a/kernel/power/energy_model.c b/kernel/power/energy_model.c
> index 6ecee99af842..95a3b33001f6 100644
> --- a/kernel/power/energy_model.c
> +++ b/kernel/power/energy_model.c
> @@ -121,7 +121,8 @@ static void em_debug_remove_pd(struct device *dev) {}
> #endif
>
> static int em_create_perf_table(struct device *dev, struct em_perf_domain *pd,
> - int nr_states, struct em_data_callback *cb)
> + int nr_states, struct em_data_callback *cb,
> + unsigned long flags)
> {
> unsigned long power, freq, prev_freq = 0, prev_cost = ULONG_MAX;
> struct em_perf_state *table;
> @@ -173,10 +174,22 @@ static int em_create_perf_table(struct device *dev, struct em_perf_domain *pd,
> /* Compute the cost of each performance state. */
> fmax = (u64) table[nr_states - 1].frequency;
> for (i = nr_states - 1; i >= 0; i--) {
> - unsigned long power_res = em_scale_power(table[i].power);
> + unsigned long power_res, cost;
> +
> + if (flags & EM_PERF_DOMAIN_ARTIFICIAL) {
> + ret = cb->get_cost(dev, table[i].frequency, &cost);
> + if (ret || !cost || cost > EM_MAX_POWER) {
> + dev_err(dev, "EM: invalid cost %lu %d\n",
> + cost, ret);
> + goto free_ps_table;
> + }
> + } else {
> + power_res = em_scale_power(table[i].power);
> + cost = div64_u64(fmax * power_res, table[i].frequency);
> + }
> +
> + table[i].cost = cost;
>
> - table[i].cost = div64_u64(fmax * power_res,
> - table[i].frequency);
> if (table[i].cost >= prev_cost) {
> table[i].flags = EM_PERF_STATE_INEFFICIENT;
> dev_dbg(dev, "EM: OPP:%lu is inefficient\n",
> @@ -197,7 +210,8 @@ static int em_create_perf_table(struct device *dev, struct em_perf_domain *pd,
> }
>
> static int em_create_pd(struct device *dev, int nr_states,
> - struct em_data_callback *cb, cpumask_t *cpus)
> + struct em_data_callback *cb, cpumask_t *cpus,
> + unsigned long flags)
> {
> struct em_perf_domain *pd;
> struct device *cpu_dev;
> @@ -215,7 +229,7 @@ static int em_create_pd(struct device *dev, int nr_states,
> return -ENOMEM;
> }
>
> - ret = em_create_perf_table(dev, pd, nr_states, cb);
> + ret = em_create_perf_table(dev, pd, nr_states, cb, flags);
> if (ret) {
> kfree(pd);
> return ret;
> @@ -332,6 +346,7 @@ int em_dev_register_perf_domain(struct device *dev, unsigned int nr_states,
> bool milliwatts)
> {
> unsigned long cap, prev_cap = 0;
> + unsigned long flags = 0;
> int cpu, ret;
>
> if (!dev || !nr_states || !cb)
> @@ -378,14 +393,16 @@ int em_dev_register_perf_domain(struct device *dev, unsigned int nr_states,
> }
> }
>
> - ret = em_create_pd(dev, nr_states, cb, cpus);
> + if (milliwatts)
> + flags |= EM_PERF_DOMAIN_MILLIWATTS;
> + else if (cb->get_cost)
> + flags |= EM_PERF_DOMAIN_ARTIFICIAL;
> +
> + ret = em_create_pd(dev, nr_states, cb, cpus, flags);
> if (ret)
> goto unlock;
>
> - if (milliwatts)
> - dev->em_pd->flags |= EM_PERF_DOMAIN_MILLIWATTS;
> - else if (cb->get_cost)
> - dev->em_pd->flags |= EM_PERF_DOMAIN_ARTIFICIAL;
> + dev->em_pd->flags |= flags;
>
nit: given that there is a designated function to create the PD which
now requires information on flags to initilise the domains properly,
might be better to have dev->em_pd->flags set inside that function,
rather than here.
> em_cpufreq_update_efficiencies(dev);
>
Reviewed-by: Ionela Voinescu <ionela.voinescu at arm.com>
Thanks,
Ionela.
> --
> 2.17.1
>
More information about the Linux-mediatek
mailing list