[PATCH] Revert "spi: modify set_cs_timing parameter"
Dafna Hirschfeld
dafna.hirschfeld at collabora.com
Thu Sep 30 05:07:00 PDT 2021
This reverts commit 04e6bb0d6bb127bac929fb35edd2dd01613c9520.
This revert the commit 'spi: modify set_cs_timing parameter'
and its following commit
'spi: mediatek: fix build warnning in set cs timing'.
Those commits cause regression on mt8173 elm device. The EC either is not
able to register or it sends numerous amount of errors:
cros-ec-i2c-tunnel 1100a000.spi:ec at 0:i2c-tunnel0: Error transferring EC i2c message -71
cros-ec-spi spi0.0: EC failed to respond in time.
Signed-off-by: Dafna Hirschfeld <dafna.hirschfeld at collabora.com>
---
drivers/spi/spi-mt65xx.c | 107 ++++++++++++++++---------------------
drivers/spi/spi-tegra114.c | 8 +--
include/linux/spi/spi.h | 3 +-
3 files changed, 52 insertions(+), 66 deletions(-)
diff --git a/drivers/spi/spi-mt65xx.c b/drivers/spi/spi-mt65xx.c
index 386e8c84be0a..aa7da41a8bd0 100644
--- a/drivers/spi/spi-mt65xx.c
+++ b/drivers/spi/spi-mt65xx.c
@@ -208,65 +208,6 @@ static void mtk_spi_reset(struct mtk_spi *mdata)
writel(reg_val, mdata->base + SPI_CMD_REG);
}
-static int mtk_spi_set_hw_cs_timing(struct spi_device *spi)
-{
- struct mtk_spi *mdata = spi_master_get_devdata(spi->master);
- struct spi_delay *cs_setup = &spi->cs_setup;
- struct spi_delay *cs_hold = &spi->cs_hold;
- struct spi_delay *cs_inactive = &spi->cs_inactive;
- u32 setup, hold, inactive;
- u32 reg_val;
- int delay;
-
- delay = spi_delay_to_ns(cs_setup, NULL);
- if (delay < 0)
- return delay;
- setup = (delay * DIV_ROUND_UP(mdata->spi_clk_hz, 1000000)) / 1000;
-
- delay = spi_delay_to_ns(cs_hold, NULL);
- if (delay < 0)
- return delay;
- hold = (delay * DIV_ROUND_UP(mdata->spi_clk_hz, 1000000)) / 1000;
-
- delay = spi_delay_to_ns(cs_inactive, NULL);
- if (delay < 0)
- return delay;
- inactive = (delay * DIV_ROUND_UP(mdata->spi_clk_hz, 1000000)) / 1000;
-
- setup = setup ? setup : 1;
- hold = hold ? hold : 1;
- inactive = inactive ? inactive : 1;
-
- reg_val = readl(mdata->base + SPI_CFG0_REG);
- if (mdata->dev_comp->enhance_timing) {
- hold = min_t(u32, hold, 0x10000);
- setup = min_t(u32, setup, 0x10000);
- reg_val &= ~(0xffff << SPI_ADJUST_CFG0_CS_HOLD_OFFSET);
- reg_val |= (((hold - 1) & 0xffff)
- << SPI_ADJUST_CFG0_CS_HOLD_OFFSET);
- reg_val &= ~(0xffff << SPI_ADJUST_CFG0_CS_SETUP_OFFSET);
- reg_val |= (((setup - 1) & 0xffff)
- << SPI_ADJUST_CFG0_CS_SETUP_OFFSET);
- } else {
- hold = min_t(u32, hold, 0x100);
- setup = min_t(u32, setup, 0x100);
- reg_val &= ~(0xff << SPI_CFG0_CS_HOLD_OFFSET);
- reg_val |= (((hold - 1) & 0xff) << SPI_CFG0_CS_HOLD_OFFSET);
- reg_val &= ~(0xff << SPI_CFG0_CS_SETUP_OFFSET);
- reg_val |= (((setup - 1) & 0xff)
- << SPI_CFG0_CS_SETUP_OFFSET);
- }
- writel(reg_val, mdata->base + SPI_CFG0_REG);
-
- inactive = min_t(u32, inactive, 0x100);
- reg_val = readl(mdata->base + SPI_CFG1_REG);
- reg_val &= ~SPI_CFG1_CS_IDLE_MASK;
- reg_val |= (((inactive - 1) & 0xff) << SPI_CFG1_CS_IDLE_OFFSET);
- writel(reg_val, mdata->base + SPI_CFG1_REG);
-
- return 0;
-}
-
static int mtk_spi_prepare_message(struct spi_master *master,
struct spi_message *msg)
{
@@ -343,8 +284,6 @@ static int mtk_spi_prepare_message(struct spi_master *master,
<< SPI_CFG1_GET_TICK_DLY_OFFSET);
writel(reg_val, mdata->base + SPI_CFG1_REG);
- /* set hw cs timing */
- mtk_spi_set_hw_cs_timing(spi);
return 0;
}
@@ -590,6 +529,52 @@ static bool mtk_spi_can_dma(struct spi_master *master,
(unsigned long)xfer->rx_buf % 4 == 0);
}
+static int mtk_spi_set_hw_cs_timing(struct spi_device *spi,
+ struct spi_delay *setup,
+ struct spi_delay *hold,
+ struct spi_delay *inactive)
+{
+ struct mtk_spi *mdata = spi_master_get_devdata(spi->master);
+ u16 setup_dly, hold_dly, inactive_dly;
+ u32 reg_val;
+
+ if ((setup && setup->unit != SPI_DELAY_UNIT_SCK) ||
+ (hold && hold->unit != SPI_DELAY_UNIT_SCK) ||
+ (inactive && inactive->unit != SPI_DELAY_UNIT_SCK)) {
+ dev_err(&spi->dev,
+ "Invalid delay unit, should be SPI_DELAY_UNIT_SCK\n");
+ return -EINVAL;
+ }
+
+ setup_dly = setup ? setup->value : 1;
+ hold_dly = hold ? hold->value : 1;
+ inactive_dly = inactive ? inactive->value : 1;
+
+ reg_val = readl(mdata->base + SPI_CFG0_REG);
+ if (mdata->dev_comp->enhance_timing) {
+ reg_val &= ~(0xffff << SPI_ADJUST_CFG0_CS_HOLD_OFFSET);
+ reg_val |= (((hold_dly - 1) & 0xffff)
+ << SPI_ADJUST_CFG0_CS_HOLD_OFFSET);
+ reg_val &= ~(0xffff << SPI_ADJUST_CFG0_CS_SETUP_OFFSET);
+ reg_val |= (((setup_dly - 1) & 0xffff)
+ << SPI_ADJUST_CFG0_CS_SETUP_OFFSET);
+ } else {
+ reg_val &= ~(0xff << SPI_CFG0_CS_HOLD_OFFSET);
+ reg_val |= (((hold_dly - 1) & 0xff) << SPI_CFG0_CS_HOLD_OFFSET);
+ reg_val &= ~(0xff << SPI_CFG0_CS_SETUP_OFFSET);
+ reg_val |= (((setup_dly - 1) & 0xff)
+ << SPI_CFG0_CS_SETUP_OFFSET);
+ }
+ writel(reg_val, mdata->base + SPI_CFG0_REG);
+
+ reg_val = readl(mdata->base + SPI_CFG1_REG);
+ reg_val &= ~SPI_CFG1_CS_IDLE_MASK;
+ reg_val |= (((inactive_dly - 1) & 0xff) << SPI_CFG1_CS_IDLE_OFFSET);
+ writel(reg_val, mdata->base + SPI_CFG1_REG);
+
+ return 0;
+}
+
static int mtk_spi_setup(struct spi_device *spi)
{
struct mtk_spi *mdata = spi_master_get_devdata(spi->master);
diff --git a/drivers/spi/spi-tegra114.c b/drivers/spi/spi-tegra114.c
index e9de1d958bbd..5131141bbf0d 100644
--- a/drivers/spi/spi-tegra114.c
+++ b/drivers/spi/spi-tegra114.c
@@ -717,12 +717,12 @@ static void tegra_spi_deinit_dma_param(struct tegra_spi_data *tspi,
dma_release_channel(dma_chan);
}
-static int tegra_spi_set_hw_cs_timing(struct spi_device *spi)
+static int tegra_spi_set_hw_cs_timing(struct spi_device *spi,
+ struct spi_delay *setup,
+ struct spi_delay *hold,
+ struct spi_delay *inactive)
{
struct tegra_spi_data *tspi = spi_master_get_devdata(spi->master);
- struct spi_delay *setup = &spi->cs_setup;
- struct spi_delay *hold = &spi->cs_hold;
- struct spi_delay *inactive = &spi->cs_inactive;
u8 setup_dly, hold_dly, inactive_dly;
u32 setup_hold;
u32 spi_cs_timing;
diff --git a/include/linux/spi/spi.h b/include/linux/spi/spi.h
index 8371bca13729..1efe2e08957e 100644
--- a/include/linux/spi/spi.h
+++ b/include/linux/spi/spi.h
@@ -554,7 +554,8 @@ struct spi_controller {
* to configure specific CS timing through spi_set_cs_timing() after
* spi_setup().
*/
- int (*set_cs_timing)(struct spi_device *spi);
+ int (*set_cs_timing)(struct spi_device *spi, struct spi_delay *setup,
+ struct spi_delay *hold, struct spi_delay *inactive);
/* bidirectional bulk transfers
*
--
2.17.1
More information about the Linux-mediatek
mailing list