[v4] PCI: Avoid unsync of LTR mechanism configuration
mingchuang qiao
mingchuang.qiao at mediatek.com
Thu Sep 30 00:02:24 PDT 2021
Hi Bjorn,
A friendly ping.
Thanks.
On Mon, 2021-09-06 at 13:36 +0800, mingchuang qiao wrote:
> Hi Bjorn,
>
> On Thu, 2021-02-18 at 10:50 -0600, Bjorn Helgaas wrote:
> > On Thu, Feb 04, 2021 at 05:51:25PM +0800, mingchuang.qiao at mediatek.
> > co
> > m wrote:
> > > From: Mingchuang Qiao <mingchuang.qiao at mediatek.com>
> > >
> > > In bus scan flow, the "LTR Mechanism Enable" bit of DEVCTL2
> > > register is
> > > configured in pci_configure_ltr(). If device and bridge both
> > > support LTR
> > > mechanism, the "LTR Mechanism Enable" bit of device and bridge
> > > will
> > > be
> > > enabled in DEVCTL2 register. And pci_dev->ltr_path will be set as
> > > 1.
> > >
> > > If PCIe link goes down when device resets, the "LTR Mechanism
> > > Enable" bit
> > > of bridge will change to 0 according to PCIe r5.0, sec 7.5.3.16.
> > > However,
> > > the pci_dev->ltr_path value of bridge is still 1.
> > >
> > > For following conditions, check and re-configure "LTR Mechanism
> > > Enable" bit
> > > of bridge to make "LTR Mechanism Enable" bit match ltr_path
> > > value.
> > > -before configuring device's LTR for hot-remove/hot-add
> > > -before restoring device's DEVCTL2 register when restore
> > > device
> > > state
> >
> > There's definitely a bug here. The commit log should say a little
> > more about what it is. I *think* if LTR is enabled and we suspend
> > (putting the device in D3cold) and resume, LTR probably doesn't
> > work
> > after resume because LTR is disabled in the upstream bridge, which
> > would be an obvious bug.
> >
> > Also, if a device with LTR enabled is hot-removed, and we hot-add a
> > device, I think LTR will not work on the new device. Possibly also
> > a
> > bug, although I'm not convinced we know how to configure LTR on the
> > new device anyway.
> >
> > So I'd *like* to merge the bug fix for v5.12, but I think I'll wait
> > because of the issue below.
> >
>
> A friendly ping.
> Any further process shall I make to get this patch merged?
>
> > > Signed-off-by: Mingchuang Qiao <mingchuang.qiao at mediatek.com>
> > > ---
> > > changes of v4
> > > -fix typo of commit message
> > > -rename: pci_reconfigure_bridge_ltr()-
> > > > pci_bridge_reconfigure_ltr()
> > >
> > > changes of v3
> > > -call pci_reconfigure_bridge_ltr() in probe.c
> > > changes of v2
> > > -modify patch description
> > > -reconfigure bridge's LTR before restoring device DEVCTL2
> > > register
> > > ---
> > > drivers/pci/pci.c | 25 +++++++++++++++++++++++++
> > > drivers/pci/pci.h | 1 +
> > > drivers/pci/probe.c | 13 ++++++++++---
> > > 3 files changed, 36 insertions(+), 3 deletions(-)
> > >
> > > diff --git a/drivers/pci/pci.c b/drivers/pci/pci.c
> > > index b9fecc25d213..6bf65d295331 100644
> > > --- a/drivers/pci/pci.c
> > > +++ b/drivers/pci/pci.c
> > > @@ -1437,6 +1437,24 @@ static int pci_save_pcie_state(struct
> > > pci_dev *dev)
> > > return 0;
> > > }
> > >
> > > +void pci_bridge_reconfigure_ltr(struct pci_dev *dev)
> > > +{
> > > +#ifdef CONFIG_PCIEASPM
> > > + struct pci_dev *bridge;
> > > + u32 ctl;
> > > +
> > > + bridge = pci_upstream_bridge(dev);
> > > + if (bridge && bridge->ltr_path) {
> > > + pcie_capability_read_dword(bridge,
> > > PCI_EXP_DEVCTL2, &ctl);
> > > + if (!(ctl & PCI_EXP_DEVCTL2_LTR_EN)) {
> > > + pci_dbg(bridge, "re-enabling LTR\n");
> > > + pcie_capability_set_word(bridge,
> > > PCI_EXP_DEVCTL2,
> > > + PCI_EXP_DEVCTL2
> > > _L
> > > TR_EN);
> >
> > This pattern of updating the upstream bridge on behalf of "dev" is
> > problematic because it's racy:
> >
> > CPU 1 CPU 2
> > ------------------- ---------------------
> > ctl = read DEVCTL2 ctl = read(DEVCTL2)
> > ctl |= DEVCTL2_LTR_EN ctl |= DEVCTL2_ARI
> > write(DEVCTL2, ctl)
> > write(DEVCTL2, ctl)
> >
> > Now the bridge has ARI set, but not LTR_EN.
> >
> > We have the same problem in the pci_enable_device() path. The most
> > recent try at fixing it is [1].
> >
> > [1] https://lore.kernel.org/linux-pci/20201218174011.340514-2-s.mir
> > os
> > hnichenko at yadro.com/
> >
> > > + }
> > > + }
> > > +#endif
> > > +}
> > > +
> > > static void pci_restore_pcie_state(struct pci_dev *dev)
> > > {
> > > int i = 0;
> > > @@ -1447,6 +1465,13 @@ static void pci_restore_pcie_state(struct
> > > pci_dev *dev)
> > > if (!save_state)
> > > return;
> > >
> > > + /*
> > > + * Downstream ports reset the LTR enable bit when link
> > > goes down.
> > > + * Check and re-configure the bit here before restoring
> > > device.
> > > + * PCIe r5.0, sec 7.5.3.16.
> > > + */
> > > + pci_bridge_reconfigure_ltr(dev);
> > > +
> > > cap = (u16 *)&save_state->cap.data[0];
> > > pcie_capability_write_word(dev, PCI_EXP_DEVCTL,
> > > cap[i++]);
> > > pcie_capability_write_word(dev, PCI_EXP_LNKCTL,
> > > cap[i++]);
> > > diff --git a/drivers/pci/pci.h b/drivers/pci/pci.h
> > > index 5c59365092fa..b3a5e5287cb7 100644
> > > --- a/drivers/pci/pci.h
> > > +++ b/drivers/pci/pci.h
> > > @@ -111,6 +111,7 @@ void pci_free_cap_save_buffers(struct pci_dev
> > > *dev);
> > > bool pci_bridge_d3_possible(struct pci_dev *dev);
> > > void pci_bridge_d3_update(struct pci_dev *dev);
> > > void pci_bridge_wait_for_secondary_bus(struct pci_dev *dev);
> > > +void pci_bridge_reconfigure_ltr(struct pci_dev *dev);
> > >
> > > static inline void pci_wakeup_event(struct pci_dev *dev)
> > > {
> > > diff --git a/drivers/pci/probe.c b/drivers/pci/probe.c
> > > index 953f15abc850..ade055e9fb58 100644
> > > --- a/drivers/pci/probe.c
> > > +++ b/drivers/pci/probe.c
> > > @@ -2132,9 +2132,16 @@ static void pci_configure_ltr(struct
> > > pci_dev
> > > *dev)
> > > * Complex and all intermediate Switches indicate
> > > support
> > > for LTR.
> > > * PCIe r4.0, sec 6.18.
> > > */
> > > - if (pci_pcie_type(dev) == PCI_EXP_TYPE_ROOT_PORT ||
> > > - ((bridge = pci_upstream_bridge(dev)) &&
> > > - bridge->ltr_path)) {
> > > + if (pci_pcie_type(dev) == PCI_EXP_TYPE_ROOT_PORT) {
> > > + pcie_capability_set_word(dev, PCI_EXP_DEVCTL2,
> > > + PCI_EXP_DEVCTL2_LTR_EN)
> > > ;
> > > + dev->ltr_path = 1;
> > > + return;
> > > + }
> > > +
> > > + bridge = pci_upstream_bridge(dev);
> > > + if (bridge && bridge->ltr_path) {
> > > + pci_bridge_reconfigure_ltr(dev);
> > > pcie_capability_set_word(dev, PCI_EXP_DEVCTL2,
> > > PCI_EXP_DEVCTL2_LTR_EN)
> > > ;
> > > dev->ltr_path = 1;
> > > --
> > > 2.18.0
> >
> > _______________________________________________
> > Linux-mediatek mailing list
> > Linux-mediatek at lists.infradead.org
> > http://lists.infradead.org/mailman/listinfo/linux-mediatek
More information about the Linux-mediatek
mailing list