[PATCH v14 2/5] dt-bindings: pinctrl: mt8195: change pull up/down description

zhiyong.tao zhiyong.tao at mediatek.com
Wed Sep 29 18:54:44 PDT 2021


On Wed, 2021-09-29 at 16:47 -0500, Rob Herring wrote:
> On Fri, Sep 24, 2021 at 04:06:29PM +0800, Zhiyong Tao wrote:
> > For supporting SI units in "bias-pull-down" & "bias-pull-up",
> > change pull up/down description
> > and add "mediatek,rsel_resistance_in_si_unit" description.
> > 
> > Signed-off-by: Zhiyong Tao <zhiyong.tao at mediatek.com>
> > ---
> >  .../bindings/pinctrl/pinctrl-mt8195.yaml      | 86
> > ++++++++++++++++++-
> >  1 file changed, 84 insertions(+), 2 deletions(-)
> > 
> > diff --git a/Documentation/devicetree/bindings/pinctrl/pinctrl-
> > mt8195.yaml b/Documentation/devicetree/bindings/pinctrl/pinctrl-
> > mt8195.yaml
> > index 2f12ec59eee5..5f642bef72af 100644
> > --- a/Documentation/devicetree/bindings/pinctrl/pinctrl-mt8195.yaml
> > +++ b/Documentation/devicetree/bindings/pinctrl/pinctrl-mt8195.yaml
> > @@ -49,6 +49,12 @@ properties:
> >      description: The interrupt outputs to sysirq.
> >      maxItems: 1
> >  
> > +  mediatek,rsel_resistance_in_si_unit:
> 
> s/_/-/

Hi Rob,

what do you mean?

> 
> > +    type: boolean
> > +    description: |
> > +      Identifying i2c pins pull up/down type which is RSEL. It can
> > support
> > +      RSEL define or si unit value(ohm) to set different
> > resistance.
> 
> Aren't the RSEL and ohms disjoint values? 0-207 for RSEL and >1000
> for 
> ohms. Why is this property even needed.
> 
No, they aren't.
As we talked in v11. "mediatek,rsel_resistance_in_si_unit" is only a
flag.



Hi ChenYu,

In the next version, we provide a solution which we discussed internal
to avoid value clashes.
 
The solution:
1. We will keep the define "MTK_PULL_SET_RSEL_000 200". It won't
change.

2. We will add a property in pio dtsi node, for example,
the property name is "rsel_resistance_in_si_unit".
We will add a flag "rsel_si_unit" in pinctrl device.
in probe function, we will identify the property name
"rsel_resistance_in_si_unit" to set the flag "rsel_si_unit" value.
So it can void value clashes.

3.We will provide the define "MTK_PULL_SET_RSEL_000 200" and si unit
two solution. users can support which solution by add property
"rsel_resistance_in_si_unit" in dts node or not.

Thanks

> > +
> >  #PIN CONFIGURATION NODES
> >  patternProperties:
> >    '-pins$':
> > @@ -85,9 +91,85 @@ patternProperties:
> >            2/4/6/8/10/12/14/16mA in mt8195.
> >          enum: [0, 1, 2, 3, 4, 5, 6, 7]
> >  
> > -      bias-pull-down: true
> > +      bias-pull-down:
> > +        description: |
> > +          For pull down type is normal, it don't need add RSEL &
> > R1R0 define
> > +          and resistance value.
> > +          For pull down type is PUPD/R0/R1 type, it can add R1R0
> > define to
> > +          set different resistance. It can support
> > "MTK_PUPD_SET_R1R0_00" &
> > +          "MTK_PUPD_SET_R1R0_01" & "MTK_PUPD_SET_R1R0_10" &
> > "MTK_PUPD_SET_R1R0_11"
> > +          define in mt8195.
> > +          For pull down type is RSEL, it can add RSEL define &
> > resistance value(ohm)
> > +          to set different resistance by identifying property
> > "mediatek,rsel_resistance_in_si_unit".
> > +          It can support "MTK_PULL_SET_RSEL_000" &
> > "MTK_PULL_SET_RSEL_001"
> > +          & "MTK_PULL_SET_RSEL_010" & "MTK_PULL_SET_RSEL_011" &
> > "MTK_PULL_SET_RSEL_100"
> > +          & "MTK_PULL_SET_RSEL_101" & "MTK_PULL_SET_RSEL_110" &
> > "MTK_PULL_SET_RSEL_111"
> > +          define in mt8195. It can also support resistance
> > value(ohm) "75000" & "5000" in mt8195.
> > +          oneOf:
> 
> Because of the indentation, this is all just part of 'description'.

Can you help to give some suggestion to fix it?


> 
> > +            - enum: [100, 101, 102, 103]
> > +            - description: mt8195 pull down PUPD/R0/R1 type define
> > value.
> 
> This entry is always true.

why is it always true? we only get define value.
"100~104" are means that "#define MTK_PUPD_SET_R1R0_10 102" in
include/dt-bindings/pinctrl/mt65xx.h.

> 
> > +            - enum: [200, 201, 202, 203, 204, 205, 206, 207]
> 
> Are these supposed to be hex?
yes, it is patch 1/5 define "#define MTK_PULL_SET_RSEL_000  200".
> 
> > +            - description: mt8195 pull down RSEL type define
> > value.
> 
> And so is this one. That makes 'oneOf' always false.

why is it always false? we only get the si unit value.

> 
> > +            - enum: [75000, 5000]
> > +            - description: mt8195 pull down RSEL type si unit
> > value(ohm).
> > +
> > +          An example of using RSEL define:
> > +          pincontroller {
> > +            i2c0_pin {
> > +              pinmux = <PINMUX_GPIO8__FUNC_SDA0>;
> > +              bias-pull-down = <MTK_PULL_SET_RSEL_001>;
> > +            };
> > +          };
> > +          An example of using si unit resistance value(ohm):
> > +          &pio {
> > +            mediatek,rsel_resistance_in_si_unit;
> > +          }
> > +          pincontroller {
> > +            i2c0_pin {
> > +              pinmux = <PINMUX_GPIO8__FUNC_SDA0>;
> > +              bias-pull-down = <75000>;
> > +            };
> > +          };
> >  
> > -      bias-pull-up: true
> > +      bias-pull-up:
> > +        description: |
> > +          For pull up type is normal, it don't need add RSEL &
> > R1R0 define
> > +          and resistance value.
> > +          For pull up type is PUPD/R0/R1 type, it can add R1R0
> > define to
> > +          set different resistance. It can support
> > "MTK_PUPD_SET_R1R0_00" &
> > +          "MTK_PUPD_SET_R1R0_01" & "MTK_PUPD_SET_R1R0_10" &
> > "MTK_PUPD_SET_R1R0_11"
> > +          define in mt8195.
> > +          For pull up type is RSEL, it can add RSEL define &
> > resistance value(ohm)
> > +          to set different resistance by identifying property
> > "mediatek,rsel_resistance_in_si_unit".
> > +          It can support "MTK_PULL_SET_RSEL_000" &
> > "MTK_PULL_SET_RSEL_001"
> > +          & "MTK_PULL_SET_RSEL_010" & "MTK_PULL_SET_RSEL_011" &
> > "MTK_PULL_SET_RSEL_100"
> > +          & "MTK_PULL_SET_RSEL_101" & "MTK_PULL_SET_RSEL_110" &
> > "MTK_PULL_SET_RSEL_111"
> > +          define in mt8195. It can also support resistance
> > value(ohm)
> > +          "1000" & "1500" & "2000" & "3000" & "4000" & "5000" &
> > "10000" & "75000" in mt8195.
> > +          oneOf:
> > +            - enum: [100, 101, 102, 103]
> > +            - description: mt8195 pull up PUPD/R0/R1 type define
> > value.
> > +            - enum: [200, 201, 202, 203, 204, 205, 206, 207]
> > +            - description: mt8195 pull up RSEL type define value.
> > +            - enum: [1000, 1500, 2000, 3000, 4000, 5000, 10000,
> > 75000]
> > +            - description: mt8195 pull up RSEL type si unit
> > value(ohm).
> 
> Same issues here.
> 
> > +          An example of using RSEL define:
> > +          pincontroller {
> > +            i2c0_pin {
> > +              pinmux = <PINMUX_GPIO8__FUNC_SDA0>;
> > +              bias-pull-up = <MTK_PULL_SET_RSEL_001>;
> > +            };
> > +          };
> > +          An example of using si unit resistance value(ohm):
> > +          &pio {
> > +            mediatek,rsel_resistance_in_si_unit;
> > +          }
> > +          pincontroller {
> > +            i2c0_pin {
> > +              pinmux = <PINMUX_GPIO8__FUNC_SDA0>;
> > +              bias-pull-up = <1000>;
> > +            };
> > +          };
> >  
> >        bias-disable: true
> >  
> > -- 
> > 2.25.1
> > 
> > 


More information about the Linux-mediatek mailing list