[RESEND v4 0/3] mmc: mediatek: Add HS400 online tuning support

[Ulf Hansson]

On Fri, 17 Sept 2021 at 14:48, Wenbin Mei <wenbin.mei at mediatek.com> wrote:
>
> Change in v4:
> - split driver patch into a core patch and a mtk-sd patch
> - use mmc_get_ext_csd function
> - move mmc_get_ext_csd() to include/linux/mmc/host.h
> - modify some commit message.
>
> Change in v3:
> - add detail descripthion for hs400 dly3
>
> Change in v2:
> - remove the check "mmc_can_ext_csd"
> - change the hs400 tuning condition for "msdc_cmd_done" function and
> "msdc_cmd_next" function
> - use "-EIO" instead of "-ERANGE"
>
> Wenbin Mei (3):
>   dt-bindings: mmc: mtk-sd: add hs400 dly3 setting
>   mmc: core: add tuning support for HS400 mode
>   mmc: mediatek: Add HS400 online tuning support
>
>  .../devicetree/bindings/mmc/mtk-sd.yaml       | 12 +++
>  drivers/mmc/core/mmc.c                        |  8 ++
>  drivers/mmc/core/mmc_ops.h                    |  1 -
>  drivers/mmc/host/mtk-sd.c                     | 79 ++++++++++++++++++-
>  include/linux/mmc/host.h                      |  4 +
>  5 files changed, 101 insertions(+), 3 deletions(-)
>
> --
> 2.25.1
>

Applied for next, thanks!

Kind regards
Uffe