[PATCH v3 30/33] iommu/mediatek: Get the proper bankid for multi banks
Yong Wu
yong.wu at mediatek.com
Thu Sep 23 04:58:37 PDT 2021
We preassign some ports in a special bank via the new defined
bank_portmsk. Put it in the plat_data means it is not expected to be
adjusted dynamically.
If the iommu id in the iommu consumer's dtsi node is inside this
bank_portmsk, then we switch it to this special iommu bank, and initialise
the IOMMU bank HW.
Each a bank has the independent pgtable(4GB iova range). Each a bank
is a independent iommu domain/group. Currently we don't separate different
iova ranges inside a bank.
Signed-off-by: Yong Wu <yong.wu at mediatek.com>
---
drivers/iommu/mtk_iommu.c | 38 +++++++++++++++++++++++++++++++++++---
drivers/iommu/mtk_iommu.h | 1 +
2 files changed, 36 insertions(+), 3 deletions(-)
diff --git a/drivers/iommu/mtk_iommu.c b/drivers/iommu/mtk_iommu.c
index 6e3f7b97f3f5..5d648f50cbe1 100644
--- a/drivers/iommu/mtk_iommu.c
+++ b/drivers/iommu/mtk_iommu.c
@@ -352,6 +352,30 @@ static irqreturn_t mtk_iommu_isr(int irq, void *dev_id)
return IRQ_HANDLED;
}
+static unsigned int mtk_iommu_get_bank_id(struct device *dev,
+ const struct mtk_iommu_plat_data *plat_data)
+{
+ struct iommu_fwspec *fwspec = dev_iommu_fwspec_get(dev);
+ unsigned int i, portmsk = 0, bankid = 0; /* bank default is 0 */
+
+ if (plat_data->bank_nr == 1)
+ return bankid;
+
+ for (i = 0; i < fwspec->num_ids; i++)
+ portmsk |= BIT(MTK_M4U_TO_PORT(fwspec->ids[i]));
+
+ for (i = 0; i < plat_data->bank_nr; i++) {
+ if (!plat_data->bank_enable[i])
+ continue;
+
+ if (portmsk & plat_data->bank_portmsk[i]) {
+ bankid = i;
+ break;
+ }
+ }
+ return bankid;
+}
+
static int mtk_iommu_get_iova_region_id(struct device *dev,
const struct mtk_iommu_plat_data *plat_data)
{
@@ -503,13 +527,14 @@ static int mtk_iommu_attach_device(struct iommu_domain *domain,
struct list_head *hw_list = data->hw_list;
struct mtk_iommu_bank_data *bank;
struct device *m4udev = data->dev;
- unsigned int bankid = 0;
+ unsigned int bankid;
int ret, region_id;
region_id = mtk_iommu_get_iova_region_id(dev, data->plat_data);
if (region_id < 0)
return region_id;
+ bankid = mtk_iommu_get_bank_id(dev, data->plat_data);
bank = &data->bank[bankid];
if (!dom->bank) {
/* Data is in the frstdata in sharing pgtable case. */
@@ -636,6 +661,7 @@ static struct iommu_group *mtk_iommu_device_group(struct device *dev)
struct mtk_iommu_data *c_data = dev_iommu_priv_get(dev), *data;
struct list_head *hw_list = c_data->hw_list;
struct iommu_group *group;
+ unsigned int bankid, groupid;
int regionid;
data = mtk_iommu_get_frst_data(hw_list);
@@ -645,12 +671,18 @@ static struct iommu_group *mtk_iommu_device_group(struct device *dev)
regionid = mtk_iommu_get_iova_region_id(dev, data->plat_data);
if (regionid < 0)
return ERR_PTR(regionid);
+ bankid = mtk_iommu_get_bank_id(dev, data->plat_data);
- group = data->m4u_group[regionid];
+ /*
+ * If the bank function is enabled, each a bank is a iommu group/domain.
+ * otherwise, each a iova region is a iommu group/domain.
+ */
+ groupid = bankid ? bankid : regionid;
+ group = data->m4u_group[groupid];
if (!group) {
group = iommu_group_alloc();
if (!IS_ERR(group))
- data->m4u_group[regionid] = group;
+ data->m4u_group[groupid] = group;
} else {
iommu_group_ref_get(group);
}
diff --git a/drivers/iommu/mtk_iommu.h b/drivers/iommu/mtk_iommu.h
index dc0190edebf0..cf4b3d10cf2c 100644
--- a/drivers/iommu/mtk_iommu.h
+++ b/drivers/iommu/mtk_iommu.h
@@ -65,6 +65,7 @@ struct mtk_iommu_plat_data {
unsigned int bank_nr;
bool bank_enable[MTK_IOMMU_BANK_MAX];
+ unsigned int bank_portmsk[MTK_IOMMU_BANK_MAX];
unsigned char larbid_remap[MTK_LARB_COM_MAX][MTK_LARB_SUBCOM_MAX];
};
--
2.18.0
More information about the Linux-mediatek
mailing list