[PATCH] mt76: mt7915: add default calibrated data support
Lorenzo Bianconi
lorenzo at kernel.org
Thu Oct 28 01:47:18 PDT 2021
> Load the default eeprom data when the content of flash/efuse is invalid.
> This could help to eliminate some issues due to incorrect or
> insufficient rf values.
>
> Co-developed-by: Bo Jiao <Bo.Jiao at mediatek.com>
> Signed-off-by: Bo Jiao <Bo.Jiao at mediatek.com>
> Signed-off-by: Shayne Chen <shayne.chen at mediatek.com>
> Reviewed-by: Ryder Lee <ryder.lee at mediatek.com>
> ---
> .../wireless/mediatek/mt76/mt7915/eeprom.c | 83 +++++++++++++++----
> .../net/wireless/mediatek/mt76/mt7915/mcu.c | 24 ++++++
> .../net/wireless/mediatek/mt76/mt7915/mcu.h | 1 +
> .../wireless/mediatek/mt76/mt7915/mt7915.h | 4 +
> 4 files changed, 98 insertions(+), 14 deletions(-)
>
> diff --git a/drivers/net/wireless/mediatek/mt76/mt7915/eeprom.c b/drivers/net/wireless/mediatek/mt76/mt7915/eeprom.c
> index ee3d644..626ea4a 100644
> --- a/drivers/net/wireless/mediatek/mt76/mt7915/eeprom.c
> +++ b/drivers/net/wireless/mediatek/mt76/mt7915/eeprom.c
> @@ -1,6 +1,7 @@
> // SPDX-License-Identifier: ISC
> /* Copyright (C) 2020 MediaTek Inc. */
>
> +#include <linux/firmware.h>
> #include "mt7915.h"
> #include "eeprom.h"
>
> @@ -10,6 +11,9 @@ static int mt7915_eeprom_load_precal(struct mt7915_dev *dev)
> u8 *eeprom = mdev->eeprom.data;
> u32 val = eeprom[MT_EE_DO_PRE_CAL];
>
> + if (!dev->flash_mode)
> + return 0;
> +
> if (val != (MT_EE_WIFI_CAL_DPD | MT_EE_WIFI_CAL_GROUP))
> return 0;
>
> @@ -21,6 +25,49 @@ static int mt7915_eeprom_load_precal(struct mt7915_dev *dev)
> return mt76_get_of_eeprom(mdev, dev->cal, MT_EE_PRECAL, val);
> }
>
> +static int mt7915_check_eeprom(struct mt7915_dev *dev)
> +{
> + u8 *eeprom = dev->mt76.eeprom.data;
> + u16 val = get_unaligned_le16(eeprom);
> +
> + switch (val) {
> + case 0x7915:
> + return 0;
> + default:
> + return -EINVAL;
> + }
> +}
> +
> +static int
> +mt7915_eeprom_load_default(struct mt7915_dev *dev)
> +{
> + char *default_bin = MT7915_EEPROM_DEFAULT;
> + u8 *eeprom = dev->mt76.eeprom.data;
> + const struct firmware *fw = NULL;
> + int ret;
> +
> + if (dev->dbdc_support)
> + default_bin = MT7915_EEPROM_DEFAULT_DBDC;
> +
> + ret = request_firmware(&fw, default_bin, dev->mt76.dev);
> + if (ret)
> + goto out;
nit: you can just drop goto and return ret here
> +
> + if (!fw || !fw->data) {
> + dev_err(dev->mt76.dev, "Invalid default bin\n");
> + ret = -EINVAL;
> + goto out;
> + }
> +
> + memcpy(eeprom, fw->data, MT7915_EEPROM_SIZE);
> + dev->flash_mode = true;
> +
> +out:
> + release_firmware(fw);
> +
> + return ret;
> +}
> +
> static int mt7915_eeprom_load(struct mt7915_dev *dev)
> {
> int ret;
> @@ -31,8 +78,8 @@ static int mt7915_eeprom_load(struct mt7915_dev *dev)
>
> if (ret) {
> dev->flash_mode = true;
> - ret = mt7915_eeprom_load_precal(dev);
> } else {
> + /* read eeprom data from efuse */
> u32 block_num, i;
>
> block_num = DIV_ROUND_UP(MT7915_EEPROM_SIZE,
> @@ -42,20 +89,28 @@ static int mt7915_eeprom_load(struct mt7915_dev *dev)
> i * MT7915_EEPROM_BLOCK_SIZE);
> }
>
> - return ret;
> -}
> -
> -static int mt7915_check_eeprom(struct mt7915_dev *dev)
> -{
> - u8 *eeprom = dev->mt76.eeprom.data;
> - u16 val = get_unaligned_le16(eeprom);
> + if (!dev->flash_mode) {
> + u8 free_block_num;
> +
> + mt7915_mcu_get_eeprom_free_block(dev, &free_block_num);
> + if (free_block_num >= 29) {
> + dev_warn(dev->mt76.dev,
> + "efuse info not enough, use default bin\n");
> + ret = mt7915_eeprom_load_default(dev);
> + if (ret)
> + return ret;
> + }
> + }
>
> - switch (val) {
> - case 0x7915:
> - return 0;
> - default:
> - return -EINVAL;
> + ret = mt7915_check_eeprom(dev);
> + if (ret) {
> + dev_warn(dev->mt76.dev, "eeprom check fail, use default bin\n");
> + ret = mt7915_eeprom_load_default(dev);
> + if (ret)
> + return ret;
nit: drop return here or just return 0 at the end
> }
> +
> + return ret;
> }
>
> void mt7915_eeprom_parse_band_config(struct mt7915_phy *phy)
> @@ -120,7 +175,7 @@ int mt7915_eeprom_init(struct mt7915_dev *dev)
> if (ret < 0)
> return ret;
>
> - ret = mt7915_check_eeprom(dev);
> + ret = mt7915_eeprom_load_precal(dev);
> if (ret)
> return ret;
>
> diff --git a/drivers/net/wireless/mediatek/mt76/mt7915/mcu.c b/drivers/net/wireless/mediatek/mt76/mt7915/mcu.c
> index b054663..ee9952d 100644
> --- a/drivers/net/wireless/mediatek/mt76/mt7915/mcu.c
> +++ b/drivers/net/wireless/mediatek/mt76/mt7915/mcu.c
> @@ -3580,6 +3580,30 @@ int mt7915_mcu_get_eeprom(struct mt7915_dev *dev, u32 offset)
> return 0;
> }
>
> +int mt7915_mcu_get_eeprom_free_block(struct mt7915_dev *dev, u8 *block_num)
> +{
> + struct {
> + u8 _rsv;
> + u8 version;
> + u8 die_idx;
> + u8 _rsv2;
> + } __packed req = {
> + .version = 1,
> + };
> + struct sk_buff *skb;
> + int ret;
> +
> + ret = mt76_mcu_send_and_get_msg(&dev->mt76, MCU_EXT_QUERY(EFUSE_FREE_BLOCK), &req,
> + sizeof(req), true, &skb);
> + if (ret)
> + return ret;
> +
> + *block_num = *(u8 *)skb->data;
> + dev_kfree_skb(skb);
> +
> + return 0;
> +}
> +
> static int mt7915_mcu_set_pre_cal(struct mt7915_dev *dev, u8 idx,
> u8 *data, u32 len, int cmd)
> {
> diff --git a/drivers/net/wireless/mediatek/mt76/mt7915/mcu.h b/drivers/net/wireless/mediatek/mt76/mt7915/mcu.h
> index b563e7c..e9f39ed 100644
> --- a/drivers/net/wireless/mediatek/mt76/mt7915/mcu.h
> +++ b/drivers/net/wireless/mediatek/mt76/mt7915/mcu.h
> @@ -278,6 +278,7 @@ enum {
> MCU_EXT_CMD_MUAR_UPDATE = 0x48,
> MCU_EXT_CMD_RX_AIRTIME_CTRL = 0x4a,
> MCU_EXT_CMD_SET_RX_PATH = 0x4e,
> + MCU_EXT_CMD_EFUSE_FREE_BLOCK = 0x4f,
> MCU_EXT_CMD_TX_POWER_FEATURE_CTRL = 0x58,
> MCU_EXT_CMD_GET_MIB_INFO = 0x5a,
> MCU_EXT_CMD_MWDS_SUPPORT = 0x80,
> diff --git a/drivers/net/wireless/mediatek/mt76/mt7915/mt7915.h b/drivers/net/wireless/mediatek/mt76/mt7915/mt7915.h
> index e69b4c8..c6c846d 100644
> --- a/drivers/net/wireless/mediatek/mt76/mt7915/mt7915.h
> +++ b/drivers/net/wireless/mediatek/mt76/mt7915/mt7915.h
> @@ -30,6 +30,9 @@
> #define MT7915_FIRMWARE_WM "mediatek/mt7915_wm.bin"
> #define MT7915_ROM_PATCH "mediatek/mt7915_rom_patch.bin"
>
> +#define MT7915_EEPROM_DEFAULT "mediatek/mt7915_eeprom.bin"
> +#define MT7915_EEPROM_DEFAULT_DBDC "mediatek/mt7915_eeprom_dbdc.bin"
> +
> #define MT7915_EEPROM_SIZE 3584
> #define MT7915_EEPROM_BLOCK_SIZE 16
> #define MT7915_TOKEN_SIZE 8192
> @@ -423,6 +426,7 @@ int mt7915_mcu_set_fixed_rate_ctrl(struct mt7915_dev *dev,
> void *data, u32 field);
> int mt7915_mcu_set_eeprom(struct mt7915_dev *dev);
> int mt7915_mcu_get_eeprom(struct mt7915_dev *dev, u32 offset);
> +int mt7915_mcu_get_eeprom_free_block(struct mt7915_dev *dev, u8 *block_num);
> int mt7915_mcu_set_mac(struct mt7915_dev *dev, int band, bool enable,
> bool hdr_trans);
> int mt7915_mcu_set_test_param(struct mt7915_dev *dev, u8 param, bool test_mode,
> --
> 2.25.1
>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 228 bytes
Desc: not available
URL: <http://lists.infradead.org/pipermail/linux-mediatek/attachments/20211028/a96775a7/attachment.sig>
More information about the Linux-mediatek
mailing list