[PATCH] printk: ringbuffer: Improve prb_next_seq() performance

John Ogness john.ogness at linutronix.de
Mon Oct 25 15:06:43 PDT 2021


Hi Petr,

I am OK with this new best effort cache. But I do have some minor
comments about the implementation...

On 2021-10-25, Petr Mladek <pmladek at suse.com> wrote:
> prb_next_seq() always iterates from the first known sequence number.
> In the worst case, it might loop 8k times for 256kB buffer,
> 15k times for 512kB buffer, and 64k times for 2MB buffer.
>
> It was reported that pooling and reading using syslog interface
> might occupy 50% of CPU.
>
> Speedup the search by storing @id of the last finalized descriptor.
>
> The loop is still needed because the @id is stored and read in the best
> effort way. An atomic variable is used to keep the @id consistent.
> But the stores and reads are not serialized against each other.
> The descriptor could get reused in the meantime. The related sequence
> number will be used only when it is still valid.
>
> An invalid value should be read _only_ when there is a flood of messages
> and the ringbuffer is rapidly reused. The performance is the least
> problem in this case.
>
> Reported-by: Chunlei Wang <chunlei.wang at mediatek.com>
> Signed-off-by: Petr Mladek <pmladek at suse.com>
> ---
>  kernel/printk/printk_ringbuffer.c | 46 ++++++++++++++++++++++++++++---
>  kernel/printk/printk_ringbuffer.h |  2 ++
>  2 files changed, 44 insertions(+), 4 deletions(-)
>
> diff --git a/kernel/printk/printk_ringbuffer.c b/kernel/printk/printk_ringbuffer.c
> index 8a7b7362c0dd..7e0c11be07c8 100644
> --- a/kernel/printk/printk_ringbuffer.c
> +++ b/kernel/printk/printk_ringbuffer.c
> @@ -474,8 +474,10 @@ static enum desc_state desc_read(struct prb_desc_ring *desc_ring,
>  	 * state has been re-checked. A memcpy() for all of @desc
>  	 * cannot be used because of the atomic_t @state_var field.
>  	 */
> -	memcpy(&desc_out->text_blk_lpos, &desc->text_blk_lpos,
> -	       sizeof(desc_out->text_blk_lpos)); /* LMM(desc_read:C) */
> +	if (desc_out) {
> +		memcpy(&desc_out->text_blk_lpos, &desc->text_blk_lpos,
> +		       sizeof(desc_out->text_blk_lpos)); /* LMM(desc_read:C) */
> +	}
>  	if (seq_out)
>  		*seq_out = info->seq; /* also part of desc_read:C */
>  	if (caller_id_out)
> @@ -1449,6 +1451,9 @@ static void desc_make_final(struct prb_desc_ring *desc_ring, unsigned long id)
>  
>  	atomic_long_cmpxchg_relaxed(&d->state_var, prev_state_val,
>  			DESC_SV(id, desc_finalized)); /* LMM(desc_make_final:A) */
> +
> +	/* Best effort to remember the last finalized @id. */
> +	atomic_long_set(&desc_ring->last_finalized_id, id);
>  }
>  
>  /**
> @@ -1657,7 +1662,12 @@ void prb_commit(struct prb_reserved_entry *e)
>   */
>  void prb_final_commit(struct prb_reserved_entry *e)
>  {
> +	struct prb_desc_ring *desc_ring = &e->rb->desc_ring;
> +
>  	_prb_commit(e, desc_finalized);
> +
> +	/* Best effort to remember the last finalized @id. */
> +	atomic_long_set(&desc_ring->last_finalized_id, e->id);
>  }
>  
>  /*
> @@ -1988,6 +1998,30 @@ u64 prb_first_valid_seq(struct printk_ringbuffer *rb)
>  	return seq;
>  }
>  
> +/* Try to read seq from the last known location. */
> +static u64 prb_last_finalized_seq(struct printk_ringbuffer *rb)
> +{
> +	struct prb_desc_ring *desc_ring = &rb->desc_ring;
> +	enum desc_state d_state;
> +	unsigned long id;
> +	u64 seq = 0;

It is not necessary to initialize @seq.

> +
> +	/* Check if the cached @id still points to a valid @seq. */
> +	id = atomic_long_read(&desc_ring->last_finalized_id);
> +	d_state = desc_read(desc_ring, id, NULL, &seq, NULL);
> +
> +	if (d_state == desc_finalized || d_state == desc_reusable)
> +		return seq;
> +
> +	/*
> +	 * The information about the last finalized sequence number
> +	 * has gone. It should happen only when there is a flood of
> +	 * new messages and the ringbuffer is rapidly recycled.
> +	 * Give up and start from the beginning.
> +	 */
> +	return 0;

Returning 0 is a bit odd here. For the problem this patch is solving it
would work, but if this new helper is ever used anywhere else, it would
be a bizarre exception since 0 can also mean success. See my suggestion
below.

> +}
> +
>  /**
>   * prb_next_seq() - Get the sequence number after the last available record.
>   *
> @@ -2005,9 +2039,12 @@ u64 prb_first_valid_seq(struct printk_ringbuffer *rb)
>   */
>  u64 prb_next_seq(struct printk_ringbuffer *rb)
>  {
> -	u64 seq = 0;
> +	u64 seq = prb_last_finalized_seq(rb);

If prb_last_finalized_seq() was successful (which can also be 0 on
success) then there is no point reading that record. We already know
that it must be higher.

I suggest implementing everything within prb_next_seq() instead of
adding the helper function prb_last_finalized_seq(). IMHO this cleanly
handles the case of a failed read for the last finalized id and avoids
an unnecessary descriptor read.

u64 prb_next_seq(struct printk_ringbuffer *rb)
{
	struct prb_desc_ring *desc_ring = &rb->desc_ring;
	enum desc_state d_state;
	unsigned long id;
	u64 seq;

	/* Check if the cached @id still points to a valid @seq. */
	id = atomic_long_read(&desc_ring->last_finalized_id);
	d_state = desc_read(desc_ring, id, NULL, &seq, NULL);

	if (d_state == desc_finalized || d_state == desc_reusable) {
		/* Begin searching after the last finalized record. */
		seq++;
	} else {
		/*
		 * The information about the last finalized sequence number
		 * has gone. It should happen only when there is a flood of
		 * new messages and the ringbuffer is rapidly recycled.
		 * Give up and start from the beginning.
		 */
		seq = 0;
	}

	/*
	 * The information about the last finalized @seq might be inaccurate.
	 * Search forward to find the current one.
	 */
	while (_prb_read_valid(rb, &seq, NULL, NULL))
		seq++;

	return seq;
}

>  
> -	/* Search forward from the oldest descriptor. */
> +	/*
> +	 * The information about the last finalized @seq might be inaccurate.
> +	 * Search forward to find the current one.
> +	 */
>  	while (_prb_read_valid(rb, &seq, NULL, NULL))
>  		seq++;
>  

John Ogness



More information about the Linux-mediatek mailing list