[PATCH v8 1/7] soc: mediatek: mmsys: add support for MDP

AngeloGioacchino Del Regno angelogioacchino.delregno at collabora.com
Mon Oct 18 06:50:58 PDT 2021


Il 15/10/21 14:38, Moudy Ho ha scritto:
> For the purpose of module independence, related settings should be moved
> from MDP to the corresponding driver.
> This patch adds more 8183 MDP settings and interface. and MDP
> related settings must be set via CMDQ to avoid frame unsynchronized.
> 
> Signed-off-by: Moudy Ho <moudy.ho at mediatek.com>
> ---
>   drivers/soc/mediatek/Kconfig           |   1 +
>   drivers/soc/mediatek/mt8183-mmsys.h    | 219 +++++++++++++++++++++++++
>   drivers/soc/mediatek/mtk-mmsys.c       |  52 ++++++
>   drivers/soc/mediatek/mtk-mmsys.h       |   2 +
>   include/linux/soc/mediatek/mtk-mmsys.h |  56 +++++++
>   5 files changed, 330 insertions(+)
> 

snip...

> diff --git a/drivers/soc/mediatek/mtk-mmsys.c b/drivers/soc/mediatek/mtk-mmsys.c
> index a78e88f27b62..31fec490617e 100644
> --- a/drivers/soc/mediatek/mtk-mmsys.c
> +++ b/drivers/soc/mediatek/mtk-mmsys.c
> @@ -7,8 +7,10 @@
>   #include <linux/device.h>
>   #include <linux/io.h>
>   #include <linux/of_device.h>
> +#include <linux/of_address.h>
>   #include <linux/platform_device.h>
>   #include <linux/soc/mediatek/mtk-mmsys.h>
> +#include <linux/soc/mediatek/mtk-cmdq.h>
>   
>   #include "mtk-mmsys.h"
>   #include "mt8167-mmsys.h"
> @@ -51,6 +53,8 @@ static const struct mtk_mmsys_driver_data mt8183_mmsys_driver_data = {
>   	.clk_driver = "clk-mt8183-mm",
>   	.routes = mmsys_mt8183_routing_table,
>   	.num_routes = ARRAY_SIZE(mmsys_mt8183_routing_table),
> +	.mdp_routes = mmsys_mt8183_mdp_routing_table,
> +	.mdp_num_routes = ARRAY_SIZE(mmsys_mt8183_mdp_routing_table),
>   };
>   
>   static const struct mtk_mmsys_driver_data mt8365_mmsys_driver_data = {
> @@ -62,6 +66,8 @@ static const struct mtk_mmsys_driver_data mt8365_mmsys_driver_data = {
>   struct mtk_mmsys {
>   	void __iomem *regs;
>   	const struct mtk_mmsys_driver_data *data;
> +	phys_addr_t addr;
> +	u8 subsys_id;
>   };
>   
>   void mtk_mmsys_ddp_connect(struct device *dev,
> @@ -101,12 +107,49 @@ void mtk_mmsys_ddp_disconnect(struct device *dev,
>   }
>   EXPORT_SYMBOL_GPL(mtk_mmsys_ddp_disconnect);
>   
> +void mtk_mmsys_mdp_connect(struct device *dev, struct mmsys_cmdq_cmd *cmd,
> +			   enum mtk_mdp_comp_id cur,
> +			   enum mtk_mdp_comp_id next)
> +{
> +	struct mtk_mmsys *mmsys = dev_get_drvdata(dev);
> +	const struct mtk_mmsys_routes *routes = mmsys->data->mdp_routes;
> +	int i;
> +
> +	WARN_ON(!routes);

Sorry, I didn't notice this one in the previous version review.

> +	WARN_ON(mmsys->subsys_id == 0);
> +	for (i = 0; i < mmsys->data->mdp_num_routes; i++)
> +		if (cur == routes[i].from_comp && next == routes[i].to_comp)

If routes is NULL, you'll get a NULL pointer kernel panic here, so you should
avoid reaching this point if that happens.

After fixing that,
Acked-By: AngeloGioacchino Del Regno <angelogioacchino.delregno at collabora.com>




More information about the Linux-mediatek mailing list