[PATCH v4 11/16] mt76: sdio: extend sdio module to support CONNAC2
Lorenzo Bianconi
lorenzo at kernel.org
Wed Oct 13 09:29:47 PDT 2021
> From: Sean Wang <sean.wang at mediatek.com>
>
> Extend sdio module to support CONNAC2 hw that mt7921s rely on.
>
> Tested-by: Deren Wu <deren.wu at mediatek.com>
> Acked-by: Lorenzo Bianconi <lorenzo at kernel.org>
> Co-developed-by: Deren Wu <deren.wu at mediatek.com>
> Signed-off-by: Deren Wu <deren.wu at mediatek.com>
> Signed-off-by: Sean Wang <sean.wang at mediatek.com>
> ---
> drivers/net/wireless/mediatek/mt76/mt76.h | 5 +-
> .../net/wireless/mediatek/mt76/mt7615/sdio.c | 5 +-
> drivers/net/wireless/mediatek/mt76/sdio.c | 23 ++++++-
> drivers/net/wireless/mediatek/mt76/sdio.h | 50 ++++++++++++++-
> .../net/wireless/mediatek/mt76/sdio_txrx.c | 62 ++++++++++++++++---
> 5 files changed, 128 insertions(+), 17 deletions(-)
>
> diff --git a/drivers/net/wireless/mediatek/mt76/mt76.h b/drivers/net/wireless/mediatek/mt76/mt76.h
> index e2f33956a122..06f0d1348d52 100644
> --- a/drivers/net/wireless/mediatek/mt76/mt76.h
> +++ b/drivers/net/wireless/mediatek/mt76/mt76.h
> @@ -505,6 +505,8 @@ struct mt76_sdio {
>
> struct sdio_func *func;
> void *intr_data;
> + int intr_size;
> + u8 hw_ver;
>
> struct {
> int pse_data_quota;
> @@ -1249,7 +1251,8 @@ int mt76s_alloc_queues(struct mt76_dev *dev);
> void mt76s_deinit(struct mt76_dev *dev);
> void mt76s_sdio_irq(struct sdio_func *func);
> void mt76s_txrx_worker(struct mt76_sdio *sdio);
> -int mt76s_hw_init(struct mt76_dev *dev, struct sdio_func *func);
> +int mt76s_hw_init(struct mt76_dev *dev, struct sdio_func *func,
> + int hw_ver);
> u32 mt76s_rr(struct mt76_dev *dev, u32 offset);
> void mt76s_wr(struct mt76_dev *dev, u32 offset, u32 val);
> u32 mt76s_rmw(struct mt76_dev *dev, u32 offset, u32 mask, u32 val);
> diff --git a/drivers/net/wireless/mediatek/mt76/mt7615/sdio.c b/drivers/net/wireless/mediatek/mt76/mt7615/sdio.c
> index f47e25f6dedb..a6b5d536d962 100644
> --- a/drivers/net/wireless/mediatek/mt76/mt7615/sdio.c
> +++ b/drivers/net/wireless/mediatek/mt76/mt7615/sdio.c
> @@ -100,7 +100,7 @@ static int mt7663s_probe(struct sdio_func *func,
> if (ret < 0)
> goto error;
>
> - ret = mt76s_hw_init(mdev, func);
> + ret = mt76s_hw_init(mdev, func, MT76_CONNAC_SDIO);
> if (ret)
> goto error;
>
> @@ -108,8 +108,9 @@ static int mt7663s_probe(struct sdio_func *func,
> (mt76_rr(dev, MT_HW_REV) & 0xff);
> dev_dbg(mdev->dev, "ASIC revision: %04x\n", mdev->rev);
>
> + mdev->sdio.intr_size = sizeof(struct mt76_connac_sdio_intr);
> mdev->sdio.intr_data = devm_kmalloc(mdev->dev,
> - sizeof(struct mt76s_intr),
> + mdev->sdio.intr_size,
> GFP_KERNEL);
> if (!mdev->sdio.intr_data) {
> ret = -ENOMEM;
> diff --git a/drivers/net/wireless/mediatek/mt76/sdio.c b/drivers/net/wireless/mediatek/mt76/sdio.c
> index 82fb4c110b90..bb40cc3e9c2b 100644
> --- a/drivers/net/wireless/mediatek/mt76/sdio.c
> +++ b/drivers/net/wireless/mediatek/mt76/sdio.c
> @@ -221,11 +221,13 @@ int mt76s_rd_rp(struct mt76_dev *dev, u32 base,
> }
> EXPORT_SYMBOL_GPL(mt76s_rd_rp);
>
> -int mt76s_hw_init(struct mt76_dev *dev, struct sdio_func *func)
> +int mt76s_hw_init(struct mt76_dev *dev, struct sdio_func *func, int hw_ver)
> {
> u32 status, ctrl;
> int ret;
>
> + dev->sdio.hw_ver = hw_ver;
> +
> sdio_claim_host(func);
>
> ret = sdio_enable_func(func);
> @@ -255,12 +257,27 @@ int mt76s_hw_init(struct mt76_dev *dev, struct sdio_func *func)
> goto disable_func;
>
> ctrl = WHIER_RX0_DONE_INT_EN | WHIER_TX_DONE_INT_EN;
> + if (hw_ver == MT76_CONNAC2_SDIO)
> + ctrl |= WHIER_RX1_DONE_INT_EN;
> sdio_writel(func, ctrl, MCR_WHIER, &ret);
> if (ret < 0)
> goto disable_func;
>
> - /* set WHISR as read clear and Rx aggregation number as 16 */
> - ctrl = FIELD_PREP(MAX_HIF_RX_LEN_NUM, 16);
> + switch (hw_ver) {
> + case MT76_CONNAC_SDIO:
> + /* set WHISR as read clear and Rx aggregation number as 16 */
> + ctrl = FIELD_PREP(MAX_HIF_RX_LEN_NUM, 16);
> + break;
> + default:
> + ctrl = sdio_readl(func, MCR_WHCR, &ret);
> + if (ret < 0)
> + goto disable_func;
> + ctrl &= ~MAX_HIF_RX_LEN_NUM_CONNAC2;
> + ctrl &= ~W_INT_CLR_CTRL; /* read clear */
> + ctrl |= FIELD_PREP(MAX_HIF_RX_LEN_NUM_CONNAC2, 0);
> + break;
> + }
> +
> sdio_writel(func, ctrl, MCR_WHCR, &ret);
> if (ret < 0)
> goto disable_func;
> diff --git a/drivers/net/wireless/mediatek/mt76/sdio.h b/drivers/net/wireless/mediatek/mt76/sdio.h
> index 03877d89e152..7d2ec044dcb1 100644
> --- a/drivers/net/wireless/mediatek/mt76/sdio.h
> +++ b/drivers/net/wireless/mediatek/mt76/sdio.h
> @@ -21,7 +21,12 @@
> #define MCR_WHCR 0x000C
> #define W_INT_CLR_CTRL BIT(1)
> #define RECV_MAILBOX_RD_CLR_EN BIT(2)
> +#define WF_SYS_RSTB BIT(4) /* supported in CONNAC2 */
> +#define WF_WHOLE_PATH_RSTB BIT(5) /* supported in CONNAC2 */
> +#define WF_SDIO_WF_PATH_RSTB BIT(6) /* supported in CONNAC2 */
> #define MAX_HIF_RX_LEN_NUM GENMASK(13, 8)
> +#define MAX_HIF_RX_LEN_NUM_CONNAC2 GENMASK(14, 8) /* supported in CONNAC2 */
> +#define WF_RST_DONE BIT(15) /* supported in CONNAC2 */
> #define RX_ENHANCE_MODE BIT(16)
>
> #define MCR_WHISR 0x0010
> @@ -29,6 +34,7 @@
> #define WHIER_D2H_SW_INT GENMASK(31, 8)
> #define WHIER_FW_OWN_BACK_INT_EN BIT(7)
> #define WHIER_ABNORMAL_INT_EN BIT(6)
> +#define WHIER_WDT_INT_EN BIT(5) /* supported in CONNAC2 */
> #define WHIER_RX1_DONE_INT_EN BIT(2)
> #define WHIER_RX0_DONE_INT_EN BIT(1)
> #define WHIER_TX_DONE_INT_EN BIT(0)
> @@ -100,7 +106,37 @@
>
> #define MCR_SWPCDBGR 0x0154
>
> -struct mt76s_intr {
> +#define MCR_H2DSM2R 0x0160 /* supported in CONNAC2 */
> +#define MCR_H2DSM3R 0x0164 /* supported in CONNAC2 */
> +#define MCR_D2HRM3R 0x0174 /* supported in CONNAC2 */
> +#define MCR_WTQCR8 0x0190 /* supported in CONNAC2 */
> +#define MCR_WTQCR9 0x0194 /* supported in CONNAC2 */
> +#define MCR_WTQCR10 0x0198 /* supported in CONNAC2 */
> +#define MCR_WTQCR11 0x019C /* supported in CONNAC2 */
> +#define MCR_WTQCR12 0x01A0 /* supported in CONNAC2 */
> +#define MCR_WTQCR13 0x01A4 /* supported in CONNAC2 */
> +#define MCR_WTQCR14 0x01A8 /* supported in CONNAC2 */
> +#define MCR_WTQCR15 0x01AC /* supported in CONNAC2 */
> +
> +enum mt76_connac_sdio_ver {
> + MT76_CONNAC_SDIO,
> + MT76_CONNAC2_SDIO,
> +};
> +
> +struct mt76_connac2_sdio_intr {
> + u32 isr;
> + struct {
> + u32 wtqcr[16];
> + } tx;
> + struct {
> + u16 num[2];
> + u16 len0[16];
> + u16 len1[128];
> + } rx;
> + u32 rec_mb[2];
> +} __packed;
> +
> +struct mt76_connac_sdio_intr {
> u32 isr;
> struct {
> u32 wtqcr[8];
> @@ -112,4 +148,16 @@ struct mt76s_intr {
> u32 rec_mb[2];
> } __packed;
>
> +struct mt76s_intr {
> + u32 isr;
> + struct {
> + u32 *wtqcr;
> + } tx;
> + struct {
> + u16 num[2];
> + u16 *len[2];
> + } rx;
> + u32 rec_mb[2];
> +};
> +
> #endif
> diff --git a/drivers/net/wireless/mediatek/mt76/sdio_txrx.c b/drivers/net/wireless/mediatek/mt76/sdio_txrx.c
> index ceb3dc0613d6..73289a9845d7 100644
> --- a/drivers/net/wireless/mediatek/mt76/sdio_txrx.c
> +++ b/drivers/net/wireless/mediatek/mt76/sdio_txrx.c
> @@ -81,7 +81,7 @@ static int
> mt76s_rx_run_queue(struct mt76_dev *dev, enum mt76_rxq_id qid,
> struct mt76s_intr *intr)
> {
> - struct mt76_queue *q = &dev->q_rx[qid];
> + struct mt76_queue *q = &dev->q_rx[0];
why qid is always 0 here?
Regards,
Lorenzo
> struct mt76_sdio *sdio = &dev->sdio;
> int len = 0, err, i;
> struct page *page;
> @@ -112,8 +112,10 @@ mt76s_rx_run_queue(struct mt76_dev *dev, enum mt76_rxq_id qid,
> for (i = 0; i < intr->rx.num[qid]; i++) {
> int index = (q->head + i) % q->ndesc;
> struct mt76_queue_entry *e = &q->entry[index];
> + __le32 *rxd = (__le32 *)buf;
>
> - len = intr->rx.len[qid][i];
> + /* parse rxd to get the actual packet length */
> + len = FIELD_GET(GENMASK(15, 0), le32_to_cpu(rxd[0]));
> e->skb = mt76s_build_rx_skb(buf, len, round_up(len + 4, 4));
> if (!e->skb)
> break;
> @@ -132,35 +134,72 @@ mt76s_rx_run_queue(struct mt76_dev *dev, enum mt76_rxq_id qid,
> return i;
> }
>
> +static void mt76s_intr_parse(struct mt76_dev *dev, void *data,
> + struct mt76s_intr *intr)
> +{
> + struct mt76_connac_sdio_intr *intr_v1;
> + struct mt76_connac2_sdio_intr *intr_v2;
> + int i;
> +
> + switch (dev->sdio.hw_ver) {
> + case MT76_CONNAC_SDIO:
> + intr_v1 = data;
> + intr->isr = intr_v1->isr;
> + intr->tx.wtqcr = intr_v1->tx.wtqcr;
> + for (i = 0; i < 2 ; i++) {
> + intr->rx.num[i] = intr_v1->rx.num[i];
> + intr->rx.len[i] = intr_v1->rx.len[i];
> + intr->rec_mb[i] = intr_v1->rec_mb[i];
> + }
> + break;
> + default:
> + intr_v2 = data;
> + intr->isr = intr_v2->isr;
> + intr->tx.wtqcr = intr_v2->tx.wtqcr;
> + for (i = 0; i < 2 ; i++) {
> + intr->rx.num[i] = intr_v2->rx.num[i];
> + if (!i)
> + intr->rx.len[0] = intr_v2->rx.len0;
> + else
> + intr->rx.len[1] = intr_v2->rx.len1;
> + intr->rec_mb[i] = intr_v2->rec_mb[i];
> + }
> + break;
> + }
> +}
> +
> static int mt76s_rx_handler(struct mt76_dev *dev)
> {
> struct mt76_sdio *sdio = &dev->sdio;
> - struct mt76s_intr *intr = sdio->intr_data;
> + void *data = sdio->intr_data;
> + struct mt76s_intr intr;
> int nframes = 0, ret;
>
> - ret = sdio_readsb(sdio->func, intr, MCR_WHISR, sizeof(*intr));
> + ret = sdio_readsb(sdio->func, data, MCR_WHISR, sdio->intr_size);
> if (ret < 0)
> return ret;
>
> - trace_dev_irq(dev, intr->isr, 0);
> + mt76s_intr_parse(dev, data, &intr);
>
> - if (intr->isr & WHIER_RX0_DONE_INT_EN) {
> - ret = mt76s_rx_run_queue(dev, 0, intr);
> + trace_dev_irq(dev, intr.isr, 0);
> +
> + if (intr.isr & WHIER_RX0_DONE_INT_EN) {
> + ret = mt76s_rx_run_queue(dev, 0, &intr);
> if (ret > 0) {
> mt76_worker_schedule(&sdio->net_worker);
> nframes += ret;
> }
> }
>
> - if (intr->isr & WHIER_RX1_DONE_INT_EN) {
> - ret = mt76s_rx_run_queue(dev, 1, intr);
> + if (intr.isr & WHIER_RX1_DONE_INT_EN) {
> + ret = mt76s_rx_run_queue(dev, 1, &intr);
> if (ret > 0) {
> mt76_worker_schedule(&sdio->net_worker);
> nframes += ret;
> }
> }
>
> - nframes += !!mt76s_refill_sched_quota(dev, intr->tx.wtqcr);
> + nframes += !!mt76s_refill_sched_quota(dev, intr.tx.wtqcr);
>
> return nframes;
> }
> @@ -173,6 +212,9 @@ mt76s_tx_pick_quota(struct mt76_sdio *sdio, bool mcu, int buf_sz,
>
> pse_sz = DIV_ROUND_UP(buf_sz + sdio->sched.deficit, MT_PSE_PAGE_SZ);
>
> + if (mcu && sdio->hw_ver == MT76_CONNAC2_SDIO)
> + pse_sz = 1;
> +
> if (mcu) {
> if (sdio->sched.pse_mcu_quota < *pse_size + pse_sz)
> return -EBUSY;
> --
> 2.25.1
>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 228 bytes
Desc: not available
URL: <http://lists.infradead.org/pipermail/linux-mediatek/attachments/20211013/259cebd0/attachment.sig>
More information about the Linux-mediatek
mailing list