[v4,9/9] arm64: dts: mediatek: add mt7986b support

[Marc Zyngier]

On 2021-10-04 10:16, Sam Shih wrote:
> Add basic chip support for Mediatek mt7986b, include
> uart nodes with correct clocks, rng node with correct clock,
> and watchdog node and mt7986b pinctrl node.
> 
> Add cpu node, timer node, gic node, psci and reserved-memory node
> for ARM Trusted Firmware,
> 
> Add clock controller nodes, include 40M clock source, topckgen, 
> infracfg,
> apmixedsys and ethernet subsystem.
> 
> Signed-off-by: Sam Shih <sam.shih at mediatek.com>
> ---
> v4: added missing gic register bases, and fixed range of GICR
> v3: used the stdout-path instead of console=ttyS0
> v2: modified clock and uart node due to clock driver updated
> ---
>  arch/arm64/boot/dts/mediatek/Makefile        |   1 +
>  arch/arm64/boot/dts/mediatek/mt7986b-rfb.dts |  26 +++
>  arch/arm64/boot/dts/mediatek/mt7986b.dtsi    | 230 +++++++++++++++++++
>  3 files changed, 257 insertions(+)
>  create mode 100644 arch/arm64/boot/dts/mediatek/mt7986b-rfb.dts
>  create mode 100644 arch/arm64/boot/dts/mediatek/mt7986b.dtsi
> 
> diff --git a/arch/arm64/boot/dts/mediatek/Makefile
> b/arch/arm64/boot/dts/mediatek/Makefile
> index e6c3a73b9e4a..d555e43d1ccc 100644
> --- a/arch/arm64/boot/dts/mediatek/Makefile
> +++ b/arch/arm64/boot/dts/mediatek/Makefile
> @@ -8,6 +8,7 @@ dtb-$(CONFIG_ARCH_MEDIATEK) += mt6797-x20-dev.dtb
>  dtb-$(CONFIG_ARCH_MEDIATEK) += mt7622-rfb1.dtb
>  dtb-$(CONFIG_ARCH_MEDIATEK) += mt7622-bananapi-bpi-r64.dtb
>  dtb-$(CONFIG_ARCH_MEDIATEK) += mt7986a-rfb.dtb
> +dtb-$(CONFIG_ARCH_MEDIATEK) += mt7986b-rfb.dtb
>  dtb-$(CONFIG_ARCH_MEDIATEK) += mt8167-pumpkin.dtb
>  dtb-$(CONFIG_ARCH_MEDIATEK) += mt8173-elm.dtb
>  dtb-$(CONFIG_ARCH_MEDIATEK) += mt8173-elm-hana.dtb
> diff --git a/arch/arm64/boot/dts/mediatek/mt7986b-rfb.dts
> b/arch/arm64/boot/dts/mediatek/mt7986b-rfb.dts
> new file mode 100644
> index 000000000000..95a202505bb2
> --- /dev/null
> +++ b/arch/arm64/boot/dts/mediatek/mt7986b-rfb.dts
> @@ -0,0 +1,26 @@
> +// SPDX-License-Identifier: (GPL-2.0 OR MIT)
> +/*
> + * Copyright (C) 2021 MediaTek Inc.
> + * Author: Sam.Shih <sam.shih at mediatek.com>
> + */
> +
> +/dts-v1/;
> +#include "mt7986b.dtsi"
> +
> +/ {
> +	model = "MediaTek MT7986b RFB";
> +	compatible = "mediatek,mt7986b-rfb";
> +
> +	aliases {
> +		serial0 = &uart0;
> +	};
> +
> +	chosen {
> +		stdout-path = "serial0:115200n8";
> +		bootargs = "earlycon=uart8250,mmio32,0x11002000 swiotlb=512";
> +	};
> +};
> +
> +&uart0 {
> +	status = "okay";
> +};
> diff --git a/arch/arm64/boot/dts/mediatek/mt7986b.dtsi
> b/arch/arm64/boot/dts/mediatek/mt7986b.dtsi
> new file mode 100644
> index 000000000000..06c3381a5170
> --- /dev/null
> +++ b/arch/arm64/boot/dts/mediatek/mt7986b.dtsi
> @@ -0,0 +1,230 @@
> +// SPDX-License-Identifier: (GPL-2.0 OR MIT)
> +/*
> + * Copyright (C) 2021 MediaTek Inc.
> + * Author: Sam.Shih <sam.shih at mediatek.com>
> + */
> +
> +#include <dt-bindings/interrupt-controller/irq.h>
> +#include <dt-bindings/interrupt-controller/arm-gic.h>
> +#include <dt-bindings/clock/mt7986-clk.h>
> +
> +/ {
> +	compatible = "mediatek,mt7986b";
> +	interrupt-parent = <&gic>;
> +	#address-cells = <2>;
> +	#size-cells = <2>;
> +
> +	clk40m: oscillator at 0 {
> +		compatible = "fixed-clock";
> +		#clock-cells = <0>;
> +		clock-frequency = <40000000>;
> +		clock-output-names = "clkxtal";
> +	};
> +
> +	cpus {
> +		#address-cells = <1>;
> +		#size-cells = <0>;
> +		cpu0: cpu at 0 {
> +			device_type = "cpu";
> +			compatible = "arm,cortex-a53";
> +			enable-method = "psci";
> +			reg = <0x0>;
> +			#cooling-cells = <2>;
> +		};
> +
> +		cpu1: cpu at 1 {
> +			device_type = "cpu";
> +			compatible = "arm,cortex-a53";
> +			enable-method = "psci";
> +			reg = <0x1>;
> +			#cooling-cells = <2>;
> +		};
> +
> +		cpu2: cpu at 2 {
> +			device_type = "cpu";
> +			compatible = "arm,cortex-a53";
> +			enable-method = "psci";
> +			reg = <0x2>;
> +			#cooling-cells = <2>;
> +		};
> +
> +		cpu3: cpu at 3 {
> +			device_type = "cpu";
> +			enable-method = "psci";
> +			compatible = "arm,cortex-a53";
> +			reg = <0x3>;
> +			#cooling-cells = <2>;
> +		};
> +	};
> +
> +	psci {
> +		compatible  = "arm,psci-0.2";
> +		method      = "smc";
> +	};
> +
> +	reserved-memory {
> +		#address-cells = <2>;
> +		#size-cells = <2>;
> +		ranges;
> +		/* 192 KiB reserved for ARM Trusted Firmware (BL31) */
> +		secmon_reserved: secmon at 43000000 {
> +			reg = <0 0x43000000 0 0x30000>;
> +			no-map;
> +		};
> +	};
> +
> +	timer {
> +		compatible = "arm,armv8-timer";
> +		interrupt-parent = <&gic>;
> +		clock-frequency = <13000000>;

As previously mentioned, please fix your firmware and drop this.

> +		interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_LOW>,
> +			     <GIC_PPI 14 IRQ_TYPE_LEVEL_LOW>,
> +			     <GIC_PPI 11 IRQ_TYPE_LEVEL_LOW>,
> +			     <GIC_PPI 10 IRQ_TYPE_LEVEL_LOW>;
> +	};
> +
> +	soc {
> +		#address-cells = <2>;
> +		#size-cells = <2>;
> +		compatible = "simple-bus";
> +		ranges;
> +
> +		gic: interrupt-controller at c000000 {
> +			compatible = "arm,gic-v3";
> +			#interrupt-cells = <3>;
> +			interrupt-parent = <&gic>;
> +			interrupt-controller;
> +			reg = <0 0x0c000000 0 0x40000>,  /* GICD */

This is not a valid value for GICD.

Thanks,

         M.