[PATCH 2/2] mt76: mt7921s: fix the device cannot sleep deeply in suspend
Lorenzo Bianconi
lorenzo.bianconi at redhat.com
Sun Nov 21 13:43:12 PST 2021
> From: Sean Wang <sean.wang at mediatek.com>
>
> >> > From: Sean Wang <sean.wang at mediatek.com>
> >> >
> >> > According to the MT7921S firmware, the cmd MCU_UNI_CMD_HIF_CTRL have
> >> > to be last MCU command to execute in suspend handler and all data
> >> > traffic have to be stopped before the cmd MCU_UNI_CMD_HIF_CTRL
> >> > starts as well in order that mt7921 can successfully fall into the deep sleep mode.
> >> >
> >> > Where we reuse the flag MT76_STATE_SUSPEND and avoid creating
> >> > another global flag to stop all of the traffic onto the SDIO bus.
> >> >
> >> > Fixes: 48fab5bbef40 ("mt76: mt7921: introduce mt7921s support")
> >> > Reported-by: Leon Yen <leon.yen at mediatek.com>
> >> > Signed-off-by: Sean Wang <sean.wang at mediatek.com>
> >> > ---
> >> > .../wireless/mediatek/mt76/mt76_connac_mcu.c | 2 +-
> >> > .../net/wireless/mediatek/mt76/mt7921/main.c | 3 --
> >> > .../net/wireless/mediatek/mt76/mt7921/sdio.c | 34 ++++++++++++-------
> >> > drivers/net/wireless/mediatek/mt76/sdio.c | 3 +-
> >> > .../net/wireless/mediatek/mt76/sdio_txrx.c | 3 +-
> >> > 5 files changed, 27 insertions(+), 18 deletions(-)
> >> >
> >> > diff --git a/drivers/net/wireless/mediatek/mt76/mt76_connac_mcu.c
> >> > b/drivers/net/wireless/mediatek/mt76/mt76_connac_mcu.c
> >> > index 26b4b875dcc0..61c4c86e79c8 100644
> >> > --- a/drivers/net/wireless/mediatek/mt76/mt76_connac_mcu.c
> >> > +++ b/drivers/net/wireless/mediatek/mt76/mt76_connac_mcu.c
> >> > @@ -2461,7 +2461,7 @@ void mt76_connac_mcu_set_suspend_iter(void *priv, u8 *mac,
> >> > struct ieee80211_vif *vif) {
> >> > struct mt76_phy *phy = priv;
> >> > - bool suspend = test_bit(MT76_STATE_SUSPEND, &phy->state);
> >> > + bool suspend = !test_bit(MT76_STATE_RUNNING, &phy->state);
> >> > struct ieee80211_hw *hw = phy->hw;
> >> > struct cfg80211_wowlan *wowlan = hw->wiphy->wowlan_config;
> >> > int i;
> >> > diff --git a/drivers/net/wireless/mediatek/mt76/mt7921/main.c
> >> > b/drivers/net/wireless/mediatek/mt76/mt7921/main.c
> >> > index e022251b4006..0b2a6b7f22ea 100644
> >> > --- a/drivers/net/wireless/mediatek/mt76/mt7921/main.c
> >> > +++ b/drivers/net/wireless/mediatek/mt76/mt7921/main.c
> >> > @@ -1242,8 +1242,6 @@ static int mt7921_suspend(struct ieee80211_hw *hw,
> >> > mt7921_mutex_acquire(dev);
> >> >
> >> > clear_bit(MT76_STATE_RUNNING, &phy->mt76->state);
> >> > -
> >> > - set_bit(MT76_STATE_SUSPEND, &phy->mt76->state);
> >> > ieee80211_iterate_active_interfaces(hw,
> >> > IEEE80211_IFACE_ITER_RESUME_ALL,
> >> > mt76_connac_mcu_set_suspend_iter, @@ -1262,7 +1260,6 @@
> >> > static int mt7921_resume(struct ieee80211_hw *hw)
> >> > mt7921_mutex_acquire(dev);
> >> >
> >> > set_bit(MT76_STATE_RUNNING, &phy->mt76->state);
> >> > - clear_bit(MT76_STATE_SUSPEND, &phy->mt76->state);
> >> > ieee80211_iterate_active_interfaces(hw,
> >> > IEEE80211_IFACE_ITER_RESUME_ALL,
> >> > mt76_connac_mcu_set_suspend_iter, diff --git
> >> > a/drivers/net/wireless/mediatek/mt76/mt7921/sdio.c
> >> > b/drivers/net/wireless/mediatek/mt76/mt7921/sdio.c
> >> > index 5fee489c7a99..5c88b6b8d097 100644
> >> > --- a/drivers/net/wireless/mediatek/mt76/mt7921/sdio.c
> >> > +++ b/drivers/net/wireless/mediatek/mt76/mt7921/sdio.c
> >> > @@ -206,6 +206,8 @@ static int mt7921s_suspend(struct device *__dev)
> >> > int err;
> >> >
> >> > pm->suspended = true;
> >> > + set_bit(MT76_STATE_SUSPEND, &mdev->phy.state);
> >> > +
> >> > cancel_delayed_work_sync(&pm->ps_work);
> >> > cancel_work_sync(&pm->wake_work);
> >> >
> >> > @@ -213,10 +215,6 @@ static int mt7921s_suspend(struct device *__dev)
> >> > if (err < 0)
> >> > goto restore_suspend;
> >> >
> >> > - err = mt76_connac_mcu_set_hif_suspend(mdev, true);
> >> > - if (err)
> >> > - goto restore_suspend;
> >> > -
> >> > /* always enable deep sleep during suspend to reduce
> >> > * power consumption
> >> > */
> >> > @@ -224,34 +222,45 @@ static int mt7921s_suspend(struct device
> >> > *__dev)
> >> >
> >> > mt76_txq_schedule_all(&dev->mphy);
> >> > mt76_worker_disable(&mdev->tx_worker);
> >> > - mt76_worker_disable(&mdev->sdio.txrx_worker);
> >> > mt76_worker_disable(&mdev->sdio.status_worker);
> >> > - mt76_worker_disable(&mdev->sdio.net_worker);
> >> > cancel_work_sync(&mdev->sdio.stat_work);
> >> > clear_bit(MT76_READING_STATS, &dev->mphy.state);
> >> > -
> >> > mt76_tx_status_check(mdev, true);
> >> >
> >> > - err = mt7921_mcu_fw_pmctrl(dev);
> >> > + mt76_worker_schedule(&mdev->sdio.txrx_worker);
> >>
> >> I guess mt76_worker_disable() is supposed to do it, right?
> >> I guess we can assume txrx_worker is no longer running here, right?
> >
> >I can see it now, txrx_worker can be running on the different cpu.
> >I guess we need to add just the wait_event_timeout() and move
> >mt76_connac_mcu_set_hif_suspend() below. What do you think?
> >Can you please try the chunk below?
>
> mt76_connac_mcu_set_hif_suspend have to rely on txrx_worker and net_worker to
> send the command MCU_UNI_CMD_HIF_CTRL and receive the corresponding event,
> so that is why we cannnot disable txrx_worker and net_worker with mt76_worker_disable
> until the mt76_connac_mcu_set_hif_suspend is done.
ack, right. I forgot about this double dependency :)
>
> >
> >Regards,
> >Lorenzo
> >
> >>
> >> > + wait_event_timeout(dev->mt76.sdio.wait,
> >> > + mt76s_txqs_empty(&dev->mt76), 5 * HZ);
> >> > +
> >> > + /* It is supposed that SDIO bus is idle at the point */
> >> > + err = mt76_connac_mcu_set_hif_suspend(mdev, true);
> >> > if (err)
> >> > goto restore_worker;
> >> >
> >> > + mt76_worker_disable(&mdev->sdio.txrx_worker);
> >> > + mt76_worker_disable(&mdev->sdio.net_worker);
> >> > +
> >> > + err = mt7921_mcu_fw_pmctrl(dev);
> >> > + if (err)
> >> > + goto restore_txrx_worker;
> >> > +
> >> > sdio_set_host_pm_flags(func, MMC_PM_KEEP_POWER);
> >> >
> >> > return 0;
> >> >
> >> > +restore_txrx_worker:
> >> > + mt76_worker_enable(&mdev->sdio.net_worker);
> >> > + mt76_worker_enable(&mdev->sdio.txrx_worker);
> >> > + mt76_connac_mcu_set_hif_suspend(mdev, false);
> >> > +
> >> > restore_worker:
> >> > mt76_worker_enable(&mdev->tx_worker);
> >> > - mt76_worker_enable(&mdev->sdio.txrx_worker);
> >> > mt76_worker_enable(&mdev->sdio.status_worker);
> >> > - mt76_worker_enable(&mdev->sdio.net_worker);
> >> >
> >> > if (!pm->ds_enable)
> >> > mt76_connac_mcu_set_deep_sleep(mdev, false);
> >> >
> >> > - mt76_connac_mcu_set_hif_suspend(mdev, false);
> >> > -
> >> > restore_suspend:
> >> > + clear_bit(MT76_STATE_SUSPEND, &mdev->phy.state);
> >> > pm->suspended = false;
> >> >
> >> > return err;
> >> > @@ -266,6 +275,7 @@ static int mt7921s_resume(struct device *__dev)
> >> > int err;
> >> >
> >> > pm->suspended = false;
> >> > + clear_bit(MT76_STATE_SUSPEND, &mdev->phy.state);
> >> >
> >> > err = mt7921_mcu_drv_pmctrl(dev);
> >> > if (err < 0)
> >> > diff --git a/drivers/net/wireless/mediatek/mt76/sdio.c
> >> > b/drivers/net/wireless/mediatek/mt76/sdio.c
> >> > index c99acc21225e..b0bc7be0fb1f 100644
> >> > --- a/drivers/net/wireless/mediatek/mt76/sdio.c
> >> > +++ b/drivers/net/wireless/mediatek/mt76/sdio.c
> >> > @@ -479,7 +479,8 @@ static void mt76s_status_worker(struct mt76_worker *w)
> >> > resched = true;
> >> >
> >> > if (dev->drv->tx_status_data &&
> >> > - !test_and_set_bit(MT76_READING_STATS, &dev->phy.state))
> >> > + !test_and_set_bit(MT76_READING_STATS, &dev->phy.state) &&
> >> > + !test_bit(MT76_STATE_SUSPEND, &dev->phy.state))
> >> > queue_work(dev->wq, &dev->sdio.stat_work);
> >> > } while (nframes > 0);
> >> >
> >> > diff --git a/drivers/net/wireless/mediatek/mt76/sdio_txrx.c
> >> > b/drivers/net/wireless/mediatek/mt76/sdio_txrx.c
> >> > index 649a56790b89..801590a0a334 100644
> >> > --- a/drivers/net/wireless/mediatek/mt76/sdio_txrx.c
> >> > +++ b/drivers/net/wireless/mediatek/mt76/sdio_txrx.c
> >> > @@ -317,7 +317,8 @@ void mt76s_txrx_worker(struct mt76_sdio *sdio)
> >> > if (ret > 0)
> >> > nframes += ret;
> >> >
> >> > - if (test_bit(MT76_MCU_RESET, &dev->phy.state)) {
> >> > + if (test_bit(MT76_MCU_RESET, &dev->phy.state) ||
> >> > + test_bit(MT76_STATE_SUSPEND, &dev->phy.state)) {
> >> > if (!mt76s_txqs_empty(dev))
> >> > continue;
> >> > else
> >>
> >> since mt76s_tx_run_queue will not run if MT76_MCU_RESET is set, do we
> >> really need to check it for each iteration or is fine something like:
> >>
> >> diff --git a/drivers/net/wireless/mediatek/mt76/sdio_txrx.c
> >> b/drivers/net/wireless/mediatek/mt76/sdio_txrx.c
> >> index 649a56790b89..68f30a83fa5d 100644
> >> --- a/drivers/net/wireless/mediatek/mt76/sdio_txrx.c
> >> +++ b/drivers/net/wireless/mediatek/mt76/sdio_txrx.c
> >> @@ -317,14 +317,12 @@ void mt76s_txrx_worker(struct mt76_sdio *sdio)
> >> if (ret > 0)
> >> nframes += ret;
> >>
> >> - if (test_bit(MT76_MCU_RESET, &dev->phy.state)) {
> >> - if (!mt76s_txqs_empty(dev))
> >> - continue;
> >> - else
> >> - wake_up(&sdio->wait);
> >> - }
> >> } while (nframes > 0);
> >>
> >> + if (test_bit(MT76_MCU_RESET, &dev->phy.state) &&
> >> + mt76s_txqs_empty(dev))
> >> + wake_up(&sdio->wait);
> >> +
>
> If doing so, mt76s_txqs_empty may not always be true because enqueuing packets
> to q_tx or MCU command to q_mcu simultanenously from the other contexts in
> different cpu is possible.
>
> It seemed to me we should check it for each iteration to guarantee that we can
> wake up the one that is waiting for the all the queues are empty at some time.
IIUC what we are interested here is there are no queued frames into the hw
queues during suspend or reset, right?
>
> >> /* enable interrupt */
> >> sdio_writel(sdio->func, WHLPCR_INT_EN_SET, MCR_WHLPCR, NULL);
> >> sdio_release_host(sdio->func);
> >>
> >> Regards,
> >> Lorenzo
> >>
> >> > --
> >> > 2.25.1
> >> >
> >
> >
> >
>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 228 bytes
Desc: not available
URL: <http://lists.infradead.org/pipermail/linux-mediatek/attachments/20211121/9c5a061e/attachment.sig>
More information about the Linux-mediatek
mailing list