[PATCH 2/2] mt76: mt7921s: fix the device cannot sleep deeply in suspend
Lorenzo Bianconi
lorenzo at kernel.org
Sat Nov 20 05:00:55 PST 2021
> From: Sean Wang <sean.wang at mediatek.com>
>
> According to the MT7921S firmware, the cmd MCU_UNI_CMD_HIF_CTRL have to
> be last MCU command to execute in suspend handler and all data traffic
> have to be stopped before the cmd MCU_UNI_CMD_HIF_CTRL starts as well
> in order that mt7921 can successfully fall into the deep sleep mode.
>
> Where we reuse the flag MT76_STATE_SUSPEND and avoid creating
> another global flag to stop all of the traffic onto the SDIO bus.
>
> Fixes: 48fab5bbef40 ("mt76: mt7921: introduce mt7921s support")
> Reported-by: Leon Yen <leon.yen at mediatek.com>
> Signed-off-by: Sean Wang <sean.wang at mediatek.com>
> ---
> .../wireless/mediatek/mt76/mt76_connac_mcu.c | 2 +-
> .../net/wireless/mediatek/mt76/mt7921/main.c | 3 --
> .../net/wireless/mediatek/mt76/mt7921/sdio.c | 34 ++++++++++++-------
> drivers/net/wireless/mediatek/mt76/sdio.c | 3 +-
> .../net/wireless/mediatek/mt76/sdio_txrx.c | 3 +-
> 5 files changed, 27 insertions(+), 18 deletions(-)
>
> diff --git a/drivers/net/wireless/mediatek/mt76/mt76_connac_mcu.c b/drivers/net/wireless/mediatek/mt76/mt76_connac_mcu.c
> index 26b4b875dcc0..61c4c86e79c8 100644
> --- a/drivers/net/wireless/mediatek/mt76/mt76_connac_mcu.c
> +++ b/drivers/net/wireless/mediatek/mt76/mt76_connac_mcu.c
> @@ -2461,7 +2461,7 @@ void mt76_connac_mcu_set_suspend_iter(void *priv, u8 *mac,
> struct ieee80211_vif *vif)
> {
> struct mt76_phy *phy = priv;
> - bool suspend = test_bit(MT76_STATE_SUSPEND, &phy->state);
> + bool suspend = !test_bit(MT76_STATE_RUNNING, &phy->state);
> struct ieee80211_hw *hw = phy->hw;
> struct cfg80211_wowlan *wowlan = hw->wiphy->wowlan_config;
> int i;
> diff --git a/drivers/net/wireless/mediatek/mt76/mt7921/main.c b/drivers/net/wireless/mediatek/mt76/mt7921/main.c
> index e022251b4006..0b2a6b7f22ea 100644
> --- a/drivers/net/wireless/mediatek/mt76/mt7921/main.c
> +++ b/drivers/net/wireless/mediatek/mt76/mt7921/main.c
> @@ -1242,8 +1242,6 @@ static int mt7921_suspend(struct ieee80211_hw *hw,
> mt7921_mutex_acquire(dev);
>
> clear_bit(MT76_STATE_RUNNING, &phy->mt76->state);
> -
> - set_bit(MT76_STATE_SUSPEND, &phy->mt76->state);
> ieee80211_iterate_active_interfaces(hw,
> IEEE80211_IFACE_ITER_RESUME_ALL,
> mt76_connac_mcu_set_suspend_iter,
> @@ -1262,7 +1260,6 @@ static int mt7921_resume(struct ieee80211_hw *hw)
> mt7921_mutex_acquire(dev);
>
> set_bit(MT76_STATE_RUNNING, &phy->mt76->state);
> - clear_bit(MT76_STATE_SUSPEND, &phy->mt76->state);
> ieee80211_iterate_active_interfaces(hw,
> IEEE80211_IFACE_ITER_RESUME_ALL,
> mt76_connac_mcu_set_suspend_iter,
> diff --git a/drivers/net/wireless/mediatek/mt76/mt7921/sdio.c b/drivers/net/wireless/mediatek/mt76/mt7921/sdio.c
> index 5fee489c7a99..5c88b6b8d097 100644
> --- a/drivers/net/wireless/mediatek/mt76/mt7921/sdio.c
> +++ b/drivers/net/wireless/mediatek/mt76/mt7921/sdio.c
> @@ -206,6 +206,8 @@ static int mt7921s_suspend(struct device *__dev)
> int err;
>
> pm->suspended = true;
> + set_bit(MT76_STATE_SUSPEND, &mdev->phy.state);
> +
> cancel_delayed_work_sync(&pm->ps_work);
> cancel_work_sync(&pm->wake_work);
>
> @@ -213,10 +215,6 @@ static int mt7921s_suspend(struct device *__dev)
> if (err < 0)
> goto restore_suspend;
>
> - err = mt76_connac_mcu_set_hif_suspend(mdev, true);
> - if (err)
> - goto restore_suspend;
> -
> /* always enable deep sleep during suspend to reduce
> * power consumption
> */
> @@ -224,34 +222,45 @@ static int mt7921s_suspend(struct device *__dev)
>
> mt76_txq_schedule_all(&dev->mphy);
> mt76_worker_disable(&mdev->tx_worker);
> - mt76_worker_disable(&mdev->sdio.txrx_worker);
> mt76_worker_disable(&mdev->sdio.status_worker);
> - mt76_worker_disable(&mdev->sdio.net_worker);
> cancel_work_sync(&mdev->sdio.stat_work);
> clear_bit(MT76_READING_STATS, &dev->mphy.state);
> -
> mt76_tx_status_check(mdev, true);
>
> - err = mt7921_mcu_fw_pmctrl(dev);
> + mt76_worker_schedule(&mdev->sdio.txrx_worker);
I guess mt76_worker_disable() is supposed to do it, right?
I guess we can assume txrx_worker is no longer running here, right?
> + wait_event_timeout(dev->mt76.sdio.wait,
> + mt76s_txqs_empty(&dev->mt76), 5 * HZ);
> +
> + /* It is supposed that SDIO bus is idle at the point */
> + err = mt76_connac_mcu_set_hif_suspend(mdev, true);
> if (err)
> goto restore_worker;
>
> + mt76_worker_disable(&mdev->sdio.txrx_worker);
> + mt76_worker_disable(&mdev->sdio.net_worker);
> +
> + err = mt7921_mcu_fw_pmctrl(dev);
> + if (err)
> + goto restore_txrx_worker;
> +
> sdio_set_host_pm_flags(func, MMC_PM_KEEP_POWER);
>
> return 0;
>
> +restore_txrx_worker:
> + mt76_worker_enable(&mdev->sdio.net_worker);
> + mt76_worker_enable(&mdev->sdio.txrx_worker);
> + mt76_connac_mcu_set_hif_suspend(mdev, false);
> +
> restore_worker:
> mt76_worker_enable(&mdev->tx_worker);
> - mt76_worker_enable(&mdev->sdio.txrx_worker);
> mt76_worker_enable(&mdev->sdio.status_worker);
> - mt76_worker_enable(&mdev->sdio.net_worker);
>
> if (!pm->ds_enable)
> mt76_connac_mcu_set_deep_sleep(mdev, false);
>
> - mt76_connac_mcu_set_hif_suspend(mdev, false);
> -
> restore_suspend:
> + clear_bit(MT76_STATE_SUSPEND, &mdev->phy.state);
> pm->suspended = false;
>
> return err;
> @@ -266,6 +275,7 @@ static int mt7921s_resume(struct device *__dev)
> int err;
>
> pm->suspended = false;
> + clear_bit(MT76_STATE_SUSPEND, &mdev->phy.state);
>
> err = mt7921_mcu_drv_pmctrl(dev);
> if (err < 0)
> diff --git a/drivers/net/wireless/mediatek/mt76/sdio.c b/drivers/net/wireless/mediatek/mt76/sdio.c
> index c99acc21225e..b0bc7be0fb1f 100644
> --- a/drivers/net/wireless/mediatek/mt76/sdio.c
> +++ b/drivers/net/wireless/mediatek/mt76/sdio.c
> @@ -479,7 +479,8 @@ static void mt76s_status_worker(struct mt76_worker *w)
> resched = true;
>
> if (dev->drv->tx_status_data &&
> - !test_and_set_bit(MT76_READING_STATS, &dev->phy.state))
> + !test_and_set_bit(MT76_READING_STATS, &dev->phy.state) &&
> + !test_bit(MT76_STATE_SUSPEND, &dev->phy.state))
> queue_work(dev->wq, &dev->sdio.stat_work);
> } while (nframes > 0);
>
> diff --git a/drivers/net/wireless/mediatek/mt76/sdio_txrx.c b/drivers/net/wireless/mediatek/mt76/sdio_txrx.c
> index 649a56790b89..801590a0a334 100644
> --- a/drivers/net/wireless/mediatek/mt76/sdio_txrx.c
> +++ b/drivers/net/wireless/mediatek/mt76/sdio_txrx.c
> @@ -317,7 +317,8 @@ void mt76s_txrx_worker(struct mt76_sdio *sdio)
> if (ret > 0)
> nframes += ret;
>
> - if (test_bit(MT76_MCU_RESET, &dev->phy.state)) {
> + if (test_bit(MT76_MCU_RESET, &dev->phy.state) ||
> + test_bit(MT76_STATE_SUSPEND, &dev->phy.state)) {
> if (!mt76s_txqs_empty(dev))
> continue;
> else
since mt76s_tx_run_queue will not run if MT76_MCU_RESET is set, do we really
need to check it for each iteration or is fine something like:
diff --git a/drivers/net/wireless/mediatek/mt76/sdio_txrx.c b/drivers/net/wireless/mediatek/mt76/sdio_txrx.c
index 649a56790b89..68f30a83fa5d 100644
--- a/drivers/net/wireless/mediatek/mt76/sdio_txrx.c
+++ b/drivers/net/wireless/mediatek/mt76/sdio_txrx.c
@@ -317,14 +317,12 @@ void mt76s_txrx_worker(struct mt76_sdio *sdio)
if (ret > 0)
nframes += ret;
- if (test_bit(MT76_MCU_RESET, &dev->phy.state)) {
- if (!mt76s_txqs_empty(dev))
- continue;
- else
- wake_up(&sdio->wait);
- }
} while (nframes > 0);
+ if (test_bit(MT76_MCU_RESET, &dev->phy.state) &&
+ mt76s_txqs_empty(dev))
+ wake_up(&sdio->wait);
+
/* enable interrupt */
sdio_writel(sdio->func, WHLPCR_INT_EN_SET, MCR_WHLPCR, NULL);
sdio_release_host(sdio->func);
Regards,
Lorenzo
> --
> 2.25.1
>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 228 bytes
Desc: not available
URL: <http://lists.infradead.org/pipermail/linux-mediatek/attachments/20211120/0296d40b/attachment.sig>
More information about the Linux-mediatek
mailing list