[PATCH v2] mt76: mt7921: introduce 160 MHz channel bandwidth support

[Deren Wu]

Hi Ryder,

On Sat, 2021-11-13 at 12:08 +0800, Ryder Lee wrote:
> On Sat, 2021-11-13 at 11:39 +0800, Deren Wu wrote:
> > On Sat, 2021-11-13 at 03:12 +0800, Ryder Lee wrote:
> > > On Mon, 2021-11-08 at 22:41 +0800, Deren Wu wrote:
> > > > From: Deren Wu <deren.wu at mediatek.com>
> > > > 
> > > > Introduce the basic configuration for chips with BW160
> > > > capability
> > > > 
> > > > Signed-off-by: Deren Wu <deren.wu at mediatek.com>
> > > > ---
> > > >  drivers/net/wireless/mediatek/mt76/mt76.h            |  1 +
> > > >  drivers/net/wireless/mediatek/mt76/mt76_connac_mcu.c |  1 +
> > > >  drivers/net/wireless/mediatek/mt76/mt7921/init.c     |  4 ++++
> > > >  drivers/net/wireless/mediatek/mt76/mt7921/main.c     | 12
> > > > ++++++++++++
> > > >  4 files changed, 18 insertions(+)
> > > > 
> > > > diff --git a/drivers/net/wireless/mediatek/mt76/mt76.h
> > > > b/drivers/net/wireless/mediatek/mt76/mt76.h
> > > > index e2da720a91b6..babca8086027 100644
> > > > --- a/drivers/net/wireless/mediatek/mt76/mt76.h
> > > > +++ b/drivers/net/wireless/mediatek/mt76/mt76.h
> > > > @@ -346,6 +346,7 @@ struct mt76_hw_cap {
> > > >  	bool has_2ghz;
> > > >  	bool has_5ghz;
> > > >  	bool has_6ghz;
> > > > +	bool has_bw160;
> > > >  };
> > > >  
> > > >  #define MT_DRV_TXWI_NO_FREE		BIT(0)
> > > > diff --git
> > > > a/drivers/net/wireless/mediatek/mt76/mt76_connac_mcu.c
> > > > b/drivers/net/wireless/mediatek/mt76/mt76_connac_mcu.c
> > > > index 26b4b875dcc0..3b42e1e8e970 100644
> > > > --- a/drivers/net/wireless/mediatek/mt76/mt76_connac_mcu.c
> > > > +++ b/drivers/net/wireless/mediatek/mt76/mt76_connac_mcu.c
> > > > @@ -1775,6 +1775,7 @@ static void
> > > > mt76_connac_mcu_parse_phy_cap(struct mt76_dev *dev,
> > > >  	dev->phy.chainmask = dev->phy.antenna_mask;
> > > >  	dev->phy.cap.has_2ghz = cap->hw_path & BIT(WF0_24G);
> > > >  	dev->phy.cap.has_5ghz = cap->hw_path & BIT(WF0_5G);
> > > > +	dev->phy.cap.has_bw160 = cap->max_bw ==
> > > > IEEE80211_STA_RX_BW_160;
> > > >  }
> > > >  
> > > >  int mt76_connac_mcu_get_nic_capability(struct mt76_phy *phy)
> > > > diff --git a/drivers/net/wireless/mediatek/mt76/mt7921/init.c
> > > > b/drivers/net/wireless/mediatek/mt76/mt7921/init.c
> > > > index 210998f086ab..30c0246fba3a 100644
> > > > --- a/drivers/net/wireless/mediatek/mt76/mt7921/init.c
> > > > +++ b/drivers/net/wireless/mediatek/mt76/mt7921/init.c
> > > > @@ -264,6 +264,10 @@ int mt7921_register_device(struct
> > > > mt7921_dev
> > > > *dev)
> > > >  			IEEE80211_VHT_CAP_SU_BEAMFORMEE_CAPABLE
> > > > |
> > > >  			IEEE80211_VHT_CAP_MU_BEAMFORMEE_CAPABLE
> > > > |
> > > >  			(3 <<
> > > > IEEE80211_VHT_CAP_BEAMFORMEE_STS_SHIFT);
> > > > +	if (dev->mt76.phy.cap.has_bw160)
> > > > +		dev->mphy.sband_5g.sband.vht_cap.cap |=
> > > > +			IEEE80211_VHT_CAP_SUPP_CHAN_WIDTH_160MH
> > > > Z |
> > > > +			IEEE80211_VHT_CAP_SHORT_GI_160;
> > > >  
> > > >  	dev->mphy.hw->wiphy->available_antennas_rx = dev-
> > > > > mphy.chainmask;
> > > > 
> > > >  	dev->mphy.hw->wiphy->available_antennas_tx = dev-
> > > > > mphy.chainmask;
> > > > 
> > > > diff --git a/drivers/net/wireless/mediatek/mt76/mt7921/main.c
> > > > b/drivers/net/wireless/mediatek/mt76/mt7921/main.c
> > > > index 633c6d2a57ac..af8c675f909f 100644
> > > > --- a/drivers/net/wireless/mediatek/mt76/mt7921/main.c
> > > > +++ b/drivers/net/wireless/mediatek/mt76/mt7921/main.c
> > > > @@ -128,11 +128,23 @@ mt7921_init_he_caps(struct mt7921_phy
> > > > *phy,
> > > > enum nl80211_band band,
> > > >  				IEEE80211_HE_PHY_CAP9_RX_1024_Q
> > > > AM_LESS_
> > > > THAN_242_TONE_RU |
> > > >  				IEEE80211_HE_PHY_CAP9_RX_FULL_B
> > > > W_SU_USI
> > > > NG_MU_WITH_COMP_SIGB |
> > > >  				IEEE80211_HE_PHY_CAP9_RX_FULL_B
> > > > W_SU_USI
> > > > NG_MU_WITH_NON_COMP_SIGB;
> > > > +
> > > > +			if (phy->mt76->cap.has_bw160) {
> > > > +				he_cap_elem->phy_cap_info[0] |=
> > > > +					IEEE80211_HE_PHY_CAP0_C
> > > > HANNEL_W
> > > > IDTH_SET_160MHZ_IN_5G;
> > > > +				he_cap_elem->phy_cap_info[8] |=
> > > > +					IEEE80211_HE_PHY_CAP8_2
> > > > 0MHZ_IN_
> > > > 160MHZ_HE_PPDU |
> > > > +					IEEE80211_HE_PHY_CAP8_8
> > > > 0MHZ_IN_
> > > > 160MHZ_HE_PPDU;
> > > > +			}
> > > >  			break;
> > > >  		}
> > > >  
> > > >  		he_mcs->rx_mcs_80 = cpu_to_le16(mcs_map);
> > > >  		he_mcs->tx_mcs_80 = cpu_to_le16(mcs_map);
> > > > +		if (phy->mt76->cap.has_bw160) {
> > > > +			he_mcs->rx_mcs_160 =
> > > > cpu_to_le16(mcs_map);
> > > > +			he_mcs->tx_mcs_160 =
> > > > cpu_to_le16(mcs_map);
> > > > +		}
> > > >  
> > > 
> > > But what about 80p80Mhz case?
> > > 
> > > Ryder
> > > 
> > 
> > Since 80p80MHz is not supprted in mt7921, we should not register
> > this
> > capability to mac80211. When the feature coming, we may have a new
> > config cap.has_bw80p80 to adapte the new flow.
> > 
> 
> Then, how to tell 80p80M and 160M apart with only checking
> IEEE80211_STA_RX_BW_160? 
> 
>  * @IEEE80211_STA_RX_BW_160: station can receive up to 160 MHz
>  *	(including 80+80 MHz)
> 
> Maybe move has_bw80p80 into mt7921_dev as it is not generic to me?
> 

As you noted, both 80p80M and 160M are included in
IEEE80211_STA_RX_BW_160. We may not check two features
by IEEE80211_STA_RX_BW_160 only. That is why I prefer to have
.has_bw160 and .has_80p80 at next stage.

With the new feature, HW should report different result in the flow of 
chip capability check. The check point should start from
mt76_connac_mcu_parse_XXXX_cap() and then we can know the real
capabilities of this HW chip.


Regards,
Deren