[PATCH] mt76: mt7921: introduce 160 MHz channel bandwidth support

[Lorenzo Bianconi]

> Hi Lore,
> 
> The definition of cap->max_bw is identical to
> ieee80211_sta_rx_bandwidth. For now, the value would be 
> IEEE80211_STA_RX_BW_160 if the chip supports bw160.

ok, so why not something like:

dev->phy.cap.has_bw160 = cap->max_bw == IEEE80211_STA_RX_BW_160;

Regards,
Lorenzo

> 
> 
> Regards,
> Deren
> 
> On Sun, 2021-11-07 at 11:45 +0100, Lorenzo Bianconi wrote:
> > > From: Deren Wu <deren.wu at mediatek.com>
> > > 
> > > Introduce the basic configuration for chips with BW160 capability
> > > 
> > > Signed-off-by: Deren Wu <deren.wu at mediatek.com>
> > > ---
> > >  drivers/net/wireless/mediatek/mt76/mt76.h            |  1 +
> > >  drivers/net/wireless/mediatek/mt76/mt76_connac_mcu.c |  1 +
> > >  drivers/net/wireless/mediatek/mt76/mt7921/init.c     |  4 ++++
> > >  drivers/net/wireless/mediatek/mt76/mt7921/main.c     | 12
> > > ++++++++++++
> > >  4 files changed, 18 insertions(+)
> > > 
> > > diff --git a/drivers/net/wireless/mediatek/mt76/mt76.h
> > > b/drivers/net/wireless/mediatek/mt76/mt76.h
> > > index e2da720a91b6..babca8086027 100644
> > > --- a/drivers/net/wireless/mediatek/mt76/mt76.h
> > > +++ b/drivers/net/wireless/mediatek/mt76/mt76.h
> > > @@ -346,6 +346,7 @@ struct mt76_hw_cap {
> > >  	bool has_2ghz;
> > >  	bool has_5ghz;
> > >  	bool has_6ghz;
> > > +	bool has_bw160;
> > >  };
> > >  
> > >  #define MT_DRV_TXWI_NO_FREE		BIT(0)
> > > diff --git a/drivers/net/wireless/mediatek/mt76/mt76_connac_mcu.c
> > > b/drivers/net/wireless/mediatek/mt76/mt76_connac_mcu.c
> > > index 26b4b875dcc0..4da20537aaf9 100644
> > > --- a/drivers/net/wireless/mediatek/mt76/mt76_connac_mcu.c
> > > +++ b/drivers/net/wireless/mediatek/mt76/mt76_connac_mcu.c
> > > @@ -1775,6 +1775,7 @@ static void
> > > mt76_connac_mcu_parse_phy_cap(struct mt76_dev *dev,
> > >  	dev->phy.chainmask = dev->phy.antenna_mask;
> > >  	dev->phy.cap.has_2ghz = cap->hw_path & BIT(WF0_24G);
> > >  	dev->phy.cap.has_5ghz = cap->hw_path & BIT(WF0_5G);
> > > +	dev->phy.cap.has_bw160 = (cap->max_bw >=
> > > IEEE80211_STA_RX_BW_160);
> > 
> > Hi Deren,
> > 
> > just out of my curiosity, what are the possible values of cap->max_bw 
> > here?
> > 
> > Regards,
> > Lorenzo
> > 
> > >  }
> > >  
> > >  int mt76_connac_mcu_get_nic_capability(struct mt76_phy *phy)
> > > diff --git a/drivers/net/wireless/mediatek/mt76/mt7921/init.c
> > > b/drivers/net/wireless/mediatek/mt76/mt7921/init.c
> > > index 210998f086ab..30c0246fba3a 100644
> > > --- a/drivers/net/wireless/mediatek/mt76/mt7921/init.c
> > > +++ b/drivers/net/wireless/mediatek/mt76/mt7921/init.c
> > > @@ -264,6 +264,10 @@ int mt7921_register_device(struct mt7921_dev
> > > *dev)
> > >  			IEEE80211_VHT_CAP_SU_BEAMFORMEE_CAPABLE |
> > >  			IEEE80211_VHT_CAP_MU_BEAMFORMEE_CAPABLE |
> > >  			(3 << IEEE80211_VHT_CAP_BEAMFORMEE_STS_SHIFT);
> > > +	if (dev->mt76.phy.cap.has_bw160)
> > > +		dev->mphy.sband_5g.sband.vht_cap.cap |=
> > > +			IEEE80211_VHT_CAP_SUPP_CHAN_WIDTH_160MHZ |
> > > +			IEEE80211_VHT_CAP_SHORT_GI_160;
> > >  
> > >  	dev->mphy.hw->wiphy->available_antennas_rx = dev-
> > > >mphy.chainmask;
> > >  	dev->mphy.hw->wiphy->available_antennas_tx = dev-
> > > >mphy.chainmask;
> > > diff --git a/drivers/net/wireless/mediatek/mt76/mt7921/main.c
> > > b/drivers/net/wireless/mediatek/mt76/mt7921/main.c
> > > index 633c6d2a57ac..af8c675f909f 100644
> > > --- a/drivers/net/wireless/mediatek/mt76/mt7921/main.c
> > > +++ b/drivers/net/wireless/mediatek/mt76/mt7921/main.c
> > > @@ -128,11 +128,23 @@ mt7921_init_he_caps(struct mt7921_phy *phy,
> > > enum nl80211_band band,
> > >  				IEEE80211_HE_PHY_CAP9_RX_1024_QAM_LESS_
> > > THAN_242_TONE_RU |
> > >  				IEEE80211_HE_PHY_CAP9_RX_FULL_BW_SU_USI
> > > NG_MU_WITH_COMP_SIGB |
> > >  				IEEE80211_HE_PHY_CAP9_RX_FULL_BW_SU_USI
> > > NG_MU_WITH_NON_COMP_SIGB;
> > > +
> > > +			if (phy->mt76->cap.has_bw160) {
> > > +				he_cap_elem->phy_cap_info[0] |=
> > > +					IEEE80211_HE_PHY_CAP0_CHANNEL_W
> > > IDTH_SET_160MHZ_IN_5G;
> > > +				he_cap_elem->phy_cap_info[8] |=
> > > +					IEEE80211_HE_PHY_CAP8_20MHZ_IN_
> > > 160MHZ_HE_PPDU |
> > > +					IEEE80211_HE_PHY_CAP8_80MHZ_IN_
> > > 160MHZ_HE_PPDU;
> > > +			}
> > >  			break;
> > >  		}
> > >  
> > >  		he_mcs->rx_mcs_80 = cpu_to_le16(mcs_map);
> > >  		he_mcs->tx_mcs_80 = cpu_to_le16(mcs_map);
> > > +		if (phy->mt76->cap.has_bw160) {
> > > +			he_mcs->rx_mcs_160 = cpu_to_le16(mcs_map);
> > > +			he_mcs->tx_mcs_160 = cpu_to_le16(mcs_map);
> > > +		}
> > >  
> > >  		memset(he_cap->ppe_thres, 0, sizeof(he_cap-
> > > >ppe_thres));
> > >  		if (he_cap_elem->phy_cap_info[6] &
> > > -- 
> > > 2.18.0
> > > 
> > 
> > _______________________________________________
> > Linux-mediatek mailing list
> > Linux-mediatek at lists.infradead.org
> > http://lists.infradead.org/mailman/listinfo/linux-mediatek
> 
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 228 bytes
Desc: not available
URL: <http://lists.infradead.org/pipermail/linux-mediatek/attachments/20211108/06f2047f/attachment.sig>