[PATCH] arm64: dts: mediatek: mt8173: Add gce-client-reg to display od/ufo

[AngeloGioacchino Del Regno]

In order to use CMDQ commands on these two IPs, we need to declare
the appropriate mediatek,gce-client-reg for them.

Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno at collabora.com>
---
 arch/arm64/boot/dts/mediatek/mt8173.dtsi | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/arch/arm64/boot/dts/mediatek/mt8173.dtsi b/arch/arm64/boot/dts/mediatek/mt8173.dtsi
index dee66e5f054c..2b7d331a4588 100644
--- a/arch/arm64/boot/dts/mediatek/mt8173.dtsi
+++ b/arch/arm64/boot/dts/mediatek/mt8173.dtsi
@@ -1212,6 +1212,7 @@ ufoe at 1401a000 {
 			interrupts = <GIC_SPI 191 IRQ_TYPE_LEVEL_LOW>;
 			power-domains = <&spm MT8173_POWER_DOMAIN_MM>;
 			clocks = <&mmsys CLK_MM_DISP_UFOE>;
+			mediatek,gce-client-reg = <&gce SUBSYS_1401XXXX 0xa000 0x1000>;
 		};
 
 		dsi0: dsi at 1401b000 {
@@ -1316,6 +1317,7 @@ od at 14023000 {
 			compatible = "mediatek,mt8173-disp-od";
 			reg = <0 0x14023000 0 0x1000>;
 			clocks = <&mmsys CLK_MM_DISP_OD>;
+			mediatek,gce-client-reg = <&gce SUBSYS_1402XXXX 0x3000 0x1000>;
 		};
 
 		hdmi0: hdmi at 14025000 {
-- 
2.33.1