[PATCH v5 05/14] media: mtk-vcodec: venc: support START and STOP commands
Dafna Hirschfeld
dafna.hirschfeld at collabora.com
Fri May 28 00:43:55 PDT 2021
Hi,
On 28.05.21 10:03, Dafna Hirschfeld wrote:
> Hi,
>
> I applied this patchset and tested the stateful encoder on debian with the command:
>
> [gst-master] root at debian:~/gst-build# gst-launch-1.0 filesrc location=images/jelly-800-640.YU12 ! rawvideoparse width=800 height=640 format=i420 ! videoconvert ! v4l2h264enc ! h264parse ! mp4mux ! filesink location=jelly-800-640.mp4
>
> I get:
>
> Setting pipeline[ 79.703879] [MTK_V4L2] level=0 fops_vcodec_open(),190: encoder capability 10000000
> to PAUSED ...
> Pipeline is PREROLLING ...
> Redistribute latency...
> [ 80.621076] mtk-iommu 10205000.iommu: Partial TLB flush timed out, falling back to full flush
> [ 80.631232] mtk-iommu 10205000.iommu: Partial TLB flush timed out, falling back to full flush
> [ 80.640878] mtk-iommu 10205000.iommu: Partial TLB flush timed out, falling back to full flush
> [ 80.650766] mtk-iommu 10205000.iommu: Partial TLB flush timed out, falling back to full flush
> [ 80.660430] mtk-iommu 10205000.iommu: Partial TLB flush timed out, falling back to full flush
> [ 80.670194] mtk-iommu 10205000.iommu: Partial TLB flush timed out, falling back to full flush
> [ 80.680967] mtk-iommu 10205000.iommu: Partial TLB flush timed out, falling back to full flush
> [ 80.691376] mtk-iommu 10205000.iommu: Partial TLB flush timed out, falling back to full flush
> [ 80.701718] mtk-iommu 10205000.iommu: Partial TLB flush timed out, falling back to full flush
> [ 80.712106] mtk-iommu 10205000.iommu: Partial TLB flush timed out, falling back to full flush
> [ 80.722272] [MTK_V4L2] level=0 mtk_venc_set_param(),371: fmt 0x3, P/L 0/0, w/h 800/640, buf 800/640, fps/bps 25/4000000, gop 0, i_period 0
> Pipeline is PREROLLED ...
> Setting pipeline to PLAYING ...
> New clock: GstSystemClock
> [ 81.918747] [MTK_V4L2][ERROR] mtk_vcodec_wait_for_done_ctx:32: [3] ctx->type=1, cmd=1, wait_event_interruptible_timeout time=1000ms out 0 0!
> [ 81.931392] [MTK_VCODEC][ERROR][3]: h264_encode_frame() irq_status=0 failed
> [ 81.938470] [MTK_V4L2][ERROR] mtk_venc_worker:1219: venc_if_encode failed=-5
> [ 82.974746] [MTK_V4L2][ERROR] mtk_vcodec_wait_for_done_ctx:32: [3] ctx->type=1, cmd=1, wait_event_interruptible_timeout time=1000ms out 0 0!
> [ 82.987392] [MTK_VCODEC][ERROR][3]: h264_encode_frame() irq_status=0 failed
> [ 82.994471] [MTK_V4L2][ERROR] mtk_venc_worker:1219: venc_if_encode failed=-5
> [ 104.163977] cros-ec-dev cros-ec-dev.2.auto: Some logs may have been dropped...
> 0:00:00.4 / 99:99:99.
> 0:00:00.4 / 99:99:99.
> 0:00:00.4 / 99:99:99.
> 0:00:00.4 / 99:99:99.
> 0:00:00.4 / 99:99:99.
> 0:00:00.4 / 99:99:99.
> 0:00:00.4 / 99:99:99.
> 0:00:00.4 / 99:99:99.
> 0:00:00.4 / 99:99:99.
> 0:00:00.4 / 99:99:99.
> ^Chandling interrupt.
>
> And then the streaming hangs. The same error happens without this patchset, but without
> this patchset the statful encoder does not support V4L2_ENC_CMD_STOP/START needed by the spec.
> I am not sure what cause the error and wether those mtk-iommu erros has to do with that. The issue
> could also come from the mtk-vpu used by the encoder.
> Do you have any idea where this can come from?
>
> Thanks,
> Dafna
>
>
>
> On 19.05.21 17:30, Alexandre Courbot wrote:
>> The V4L2 encoder specification requires encoders to support the
>> V4L2_ENC_CMD_START and V4L2_ENC_CMD_STOP commands. Add support for these
>> to the mtk-vcodec encoder by reusing the same flush buffer as used by
>> the decoder driver.
>>
>> Signed-off-by: Alexandre Courbot <acourbot at chromium.org>
>> [hsinyi: fix double-free issue if flush buffer was not dequeued by the
>> time streamoff is called]
>> Signed-off-by: Hsin-Yi Wang <hsinyi at chromium.org>
>> ---
>> .../platform/mtk-vcodec/mtk_vcodec_drv.h | 2 +
>> .../platform/mtk-vcodec/mtk_vcodec_enc.c | 135 +++++++++++++++++-
>> .../platform/mtk-vcodec/mtk_vcodec_enc_drv.c | 4 +
>> 3 files changed, 134 insertions(+), 7 deletions(-)
>>
>> diff --git a/drivers/media/platform/mtk-vcodec/mtk_vcodec_drv.h b/drivers/media/platform/mtk-vcodec/mtk_vcodec_drv.h
>> index c6fe61253f43..37a62c0f406f 100644
>> --- a/drivers/media/platform/mtk-vcodec/mtk_vcodec_drv.h
>> +++ b/drivers/media/platform/mtk-vcodec/mtk_vcodec_drv.h
>> @@ -252,6 +252,7 @@ struct vdec_pic_info {
>> * @last_decoded_picinfo: pic information get from latest decode
>> * @empty_flush_buf: a fake size-0 capture buffer that indicates flush. Only
>> * to be used with encoder and stateful decoder.
>> + * @is_flushing: set to true if flushing is in progress.
>> *
>> * @colorspace: enum v4l2_colorspace; supplemental to pixelformat
>> * @ycbcr_enc: enum v4l2_ycbcr_encoding, Y'CbCr encoding
>> @@ -290,6 +291,7 @@ struct mtk_vcodec_ctx {
>> struct work_struct encode_work;
>> struct vdec_pic_info last_decoded_picinfo;
>> struct v4l2_m2m_buffer empty_flush_buf;
>> + bool is_flushing;
>> enum v4l2_colorspace colorspace;
>> enum v4l2_ycbcr_encoding ycbcr_enc;
>> diff --git a/drivers/media/platform/mtk-vcodec/mtk_vcodec_enc.c b/drivers/media/platform/mtk-vcodec/mtk_vcodec_enc.c
>> index 4831052f475d..4701dea251ca 100644
>> --- a/drivers/media/platform/mtk-vcodec/mtk_vcodec_enc.c
>> +++ b/drivers/media/platform/mtk-vcodec/mtk_vcodec_enc.c
>> @@ -659,6 +659,7 @@ static int vidioc_venc_dqbuf(struct file *file, void *priv,
>> struct v4l2_buffer *buf)
>> {
>> struct mtk_vcodec_ctx *ctx = fh_to_ctx(priv);
>> + int ret;
>> if (ctx->state == MTK_STATE_ABORT) {
>> mtk_v4l2_err("[%d] Call on QBUF after unrecoverable error",
>> @@ -666,7 +667,77 @@ static int vidioc_venc_dqbuf(struct file *file, void *priv,
>> return -EIO;
>> }
>> - return v4l2_m2m_dqbuf(file, ctx->m2m_ctx, buf);
>> + ret = v4l2_m2m_dqbuf(file, ctx->m2m_ctx, buf);
>> + if (ret)
>> + return ret;
>> +
>> + /*
>> + * Complete flush if the user dequeued the 0-payload LAST buffer.
>> + * We check the payload because a buffer with the LAST flag can also
>> + * be seen during resolution changes. If we happen to be flushing at
>> + * that time, the last buffer before the resolution changes could be
>> + * misinterpreted for the buffer generated by the flush and terminate
>> + * it earlier than we want.
>> + */
>> + if (!V4L2_TYPE_IS_OUTPUT(buf->type) &&
>> + buf->flags & V4L2_BUF_FLAG_LAST &&
>> + buf->m.planes[0].bytesused == 0 &&
>> + ctx->is_flushing) {
>> + /*
>> + * Last CAPTURE buffer is dequeued, we can allow another flush
>> + * to take place.
>> + */
>> + ctx->is_flushing = false;
>> + }
>> +
>> + return 0;
>> +}
>> +
>> +static int vidioc_encoder_cmd(struct file *file, void *priv,
>> + struct v4l2_encoder_cmd *cmd)
>> +{
>> + struct mtk_vcodec_ctx *ctx = fh_to_ctx(priv);
>> + struct vb2_queue *src_vq, *dst_vq;
>> + int ret;
I see that the driver return -EIO on the ioctls when in state MTK_STATE_ABORT
so you should probably test the state here as well.
Thanks,
Dafna
>> +
>> + ret = v4l2_m2m_ioctl_try_encoder_cmd(file, priv, cmd);
>> + if (ret)
>> + return ret;
>> +
>> + /* Calling START or STOP is invalid if a flush is in progress */
>> + if (ctx->is_flushing)
>> + return -EBUSY;
>> +
>> + mtk_v4l2_debug(1, "encoder cmd=%u", cmd->cmd);
>> +
>> + dst_vq = v4l2_m2m_get_vq(ctx->m2m_ctx,
>> + V4L2_BUF_TYPE_VIDEO_CAPTURE_MPLANE);
>> + switch (cmd->cmd) {
>> + case V4L2_ENC_CMD_STOP:
>> + src_vq = v4l2_m2m_get_vq(ctx->m2m_ctx,
>> + V4L2_BUF_TYPE_VIDEO_OUTPUT_MPLANE);
>> + if (!vb2_is_streaming(src_vq)) {
>> + mtk_v4l2_debug(1, "Output stream is off. No need to flush.");
>> + return 0;
>> + }
>> + if (!vb2_is_streaming(dst_vq)) {
>> + mtk_v4l2_debug(1, "Capture stream is off. No need to flush.");
>> + return 0;
>> + }
>> + ctx->is_flushing = true;
>> + v4l2_m2m_buf_queue(ctx->m2m_ctx, &ctx->empty_flush_buf.vb);
>> + v4l2_m2m_try_schedule(ctx->m2m_ctx);
>> + break;
>> +
>> + case V4L2_ENC_CMD_START:
>> + vb2_clear_last_buffer_dequeued(dst_vq);
>> + break;
>> +
>> + default:
>> + return -EINVAL;
>> + }
>> +
>> + return 0;
>> }
>> const struct v4l2_ioctl_ops mtk_venc_ioctl_ops = {
>> @@ -702,6 +773,9 @@ const struct v4l2_ioctl_ops mtk_venc_ioctl_ops = {
>> .vidioc_g_selection = vidioc_venc_g_selection,
>> .vidioc_s_selection = vidioc_venc_s_selection,
>> +
>> + .vidioc_encoder_cmd = vidioc_encoder_cmd,
>> + .vidioc_try_encoder_cmd = v4l2_m2m_ioctl_try_encoder_cmd,
>> };
>> static int vb2ops_venc_queue_setup(struct vb2_queue *vq,
>> @@ -869,9 +943,39 @@ static void vb2ops_venc_stop_streaming(struct vb2_queue *q)
>> dst_buf->vb2_buf.planes[0].bytesused = 0;
>> v4l2_m2m_buf_done(dst_buf, VB2_BUF_STATE_ERROR);
>> }
>> + /* STREAMOFF on the CAPTURE queue completes any ongoing flush */
>> + if (ctx->is_flushing) {
>> + struct v4l2_m2m_buffer *b, *n;
>> +
>> + mtk_v4l2_debug(1, "STREAMOFF called while flushing");
>> + /*
>> + * STREAMOFF could be called before the flush buffer is
>> + * dequeued. Check whether empty flush buf is still in
>> + * queue before removing it.
>> + */
>> + v4l2_m2m_for_each_src_buf_safe(ctx->m2m_ctx, b, n) {
>> + if (b == &ctx->empty_flush_buf) {
>> + v4l2_m2m_src_buf_remove_by_buf(
>> + ctx->m2m_ctx, &b->vb);
>> + break;
>> + }
>> + }
>> + ctx->is_flushing = false;
>> + }
>> } else {
>> - while ((src_buf = v4l2_m2m_src_buf_remove(ctx->m2m_ctx)))
>> - v4l2_m2m_buf_done(src_buf, VB2_BUF_STATE_ERROR);
>> + while ((src_buf = v4l2_m2m_src_buf_remove(ctx->m2m_ctx))) {
>> + if (src_buf != &ctx->empty_flush_buf.vb)
>> + v4l2_m2m_buf_done(src_buf, VB2_BUF_STATE_ERROR);
>> + }
>> + if (ctx->is_flushing) {
>> + /*
>> + * If we are in the middle of a flush, put the flush
>> + * buffer back into the queue so the next CAPTURE
>> + * buffer gets returned with the LAST flag set.
>> + */
>> + v4l2_m2m_buf_queue(ctx->m2m_ctx,
>> + &ctx->empty_flush_buf.vb);
>> + }
>> }
>> if ((q->type == V4L2_BUF_TYPE_VIDEO_CAPTURE_MPLANE &&
>> @@ -971,12 +1075,15 @@ static int mtk_venc_param_change(struct mtk_vcodec_ctx *ctx)
>> {
>> struct venc_enc_param enc_prm;
>> struct vb2_v4l2_buffer *vb2_v4l2 = v4l2_m2m_next_src_buf(ctx->m2m_ctx);
>> - struct mtk_video_enc_buf *mtk_buf =
>> - container_of(vb2_v4l2, struct mtk_video_enc_buf,
>> - m2m_buf.vb);
>> -
>> + struct mtk_video_enc_buf *mtk_buf;
>> int ret = 0;
>> + /* Don't upcast the empty flush buffer */
>> + if (vb2_v4l2 == &ctx->empty_flush_buf.vb)
>> + return 0;
>> +
>> + mtk_buf = container_of(vb2_v4l2, struct mtk_video_enc_buf, m2m_buf.vb);
>> +
>> memset(&enc_prm, 0, sizeof(enc_prm));
>> if (mtk_buf->param_change == MTK_ENCODE_PARAM_NONE)
>> return 0;
>> @@ -1062,6 +1169,20 @@ static void mtk_venc_worker(struct work_struct *work)
>> }
>> src_buf = v4l2_m2m_src_buf_remove(ctx->m2m_ctx);
>> +
>> + /*
>> + * If we see the flush buffer, send an empty buffer with the LAST flag
>> + * to the client. is_flushing will be reset at the time the buffer
>> + * is dequeued.
>> + */
>> + if (src_buf == &ctx->empty_flush_buf.vb) {
>> + vb2_set_plane_payload(&dst_buf->vb2_buf, 0, 0);
>> + dst_buf->flags |= V4L2_BUF_FLAG_LAST;
>> + v4l2_m2m_buf_done(dst_buf, VB2_BUF_STATE_DONE);
>> + v4l2_m2m_job_finish(ctx->dev->m2m_dev_enc, ctx->m2m_ctx);
>> + return;
>> + }
>> +
>> memset(&frm_buf, 0, sizeof(frm_buf));
>> for (i = 0; i < src_buf->vb2_buf.num_planes ; i++) {
>> frm_buf.fb_addr[i].dma_addr =
>> diff --git a/drivers/media/platform/mtk-vcodec/mtk_vcodec_enc_drv.c b/drivers/media/platform/mtk-vcodec/mtk_vcodec_enc_drv.c
>> index 7d7b8cfc2cc5..2dd6fef896df 100644
>> --- a/drivers/media/platform/mtk-vcodec/mtk_vcodec_enc_drv.c
>> +++ b/drivers/media/platform/mtk-vcodec/mtk_vcodec_enc_drv.c
>> @@ -131,6 +131,7 @@ static int fops_vcodec_open(struct file *file)
>> struct mtk_vcodec_dev *dev = video_drvdata(file);
>> struct mtk_vcodec_ctx *ctx = NULL;
>> int ret = 0;
>> + struct vb2_queue *src_vq;
>> ctx = kzalloc(sizeof(*ctx), GFP_KERNEL);
>> if (!ctx)
>> @@ -164,6 +165,9 @@ static int fops_vcodec_open(struct file *file)
>> ret);
>> goto err_m2m_ctx_init;
>> }
>> + src_vq = v4l2_m2m_get_vq(ctx->m2m_ctx,
>> + V4L2_BUF_TYPE_VIDEO_OUTPUT_MPLANE);
>> + ctx->empty_flush_buf.vb.vb2_buf.vb2_queue = src_vq;
>> mtk_vcodec_enc_set_default_params(ctx);
>> if (v4l2_fh_is_singular(&ctx->fh)) {
>>
More information about the Linux-mediatek
mailing list