[PATCH net-next v2 1/4] net: phy: add MediaTek Gigabit Ethernet PHY driver

[DENG Qingfang]

On Thu, May 20, 2021 at 02:59:21AM +0200, Andrew Lunn wrote:
> > +static void mtk_gephy_config_init(struct phy_device *phydev)
> > +{
> > +	/* Disable EEE */
> > +	phy_write_mmd(phydev, MDIO_MMD_AN, MDIO_AN_EEE_ADV, 0);
> 
> Is EEE broken on this PHY? Or is this just to get it into a defined
> state?

As I said in commit message, the initialization (including EEE) is
from the vendor driver.
I have also tested it with EEE enabled by default on one of my APs,
and got occasional link drops.

> 
> Otherwise
> 
> Reviewed-by: Andrew Lunn <andrew at lunn.ch>
> 
>     Andrew