[PATCH 2/9] mt76: mt7921: Don't alter Rx path classifier

[sean.wang at mediatek.com]

From: Sean Wang <sean.wang at mediatek.com>

Keep Rx path classifier the mt7921 firmware prefers to allow frames pass
through MCU.

Fixes: 5c14a5f944b9 ("mt76: mt7921: introduce mt7921e support")
Reviewed-by: Lorenzo Bianconi <lorenzo at kernel.org>
Signed-off-by: Sean Wang <sean.wang at mediatek.com>
---
 .../net/wireless/mediatek/mt76/mt7921/init.c   | 18 ------------------
 1 file changed, 18 deletions(-)

diff --git a/drivers/net/wireless/mediatek/mt76/mt7921/init.c b/drivers/net/wireless/mediatek/mt76/mt7921/init.c
index 1d4ba5d0166a..6947d98287c0 100644
--- a/drivers/net/wireless/mediatek/mt76/mt7921/init.c
+++ b/drivers/net/wireless/mediatek/mt76/mt7921/init.c
@@ -118,30 +118,12 @@ mt7921_init_wiphy(struct ieee80211_hw *hw)
 static void
 mt7921_mac_init_band(struct mt7921_dev *dev, u8 band)
 {
-	u32 mask, set;
-
 	mt76_rmw_field(dev, MT_TMAC_CTCR0(band),
 		       MT_TMAC_CTCR0_INS_DDLMT_REFTIME, 0x3f);
 	mt76_set(dev, MT_TMAC_CTCR0(band),
 		 MT_TMAC_CTCR0_INS_DDLMT_VHT_SMPDU_EN |
 		 MT_TMAC_CTCR0_INS_DDLMT_EN);
 
-	mask = MT_MDP_RCFR0_MCU_RX_MGMT |
-	       MT_MDP_RCFR0_MCU_RX_CTL_NON_BAR |
-	       MT_MDP_RCFR0_MCU_RX_CTL_BAR;
-	set = FIELD_PREP(MT_MDP_RCFR0_MCU_RX_MGMT, MT_MDP_TO_HIF) |
-	      FIELD_PREP(MT_MDP_RCFR0_MCU_RX_CTL_NON_BAR, MT_MDP_TO_HIF) |
-	      FIELD_PREP(MT_MDP_RCFR0_MCU_RX_CTL_BAR, MT_MDP_TO_HIF);
-	mt76_rmw(dev, MT_MDP_BNRCFR0(band), mask, set);
-
-	mask = MT_MDP_RCFR1_MCU_RX_BYPASS |
-	       MT_MDP_RCFR1_RX_DROPPED_UCAST |
-	       MT_MDP_RCFR1_RX_DROPPED_MCAST;
-	set = FIELD_PREP(MT_MDP_RCFR1_MCU_RX_BYPASS, MT_MDP_TO_HIF) |
-	      FIELD_PREP(MT_MDP_RCFR1_RX_DROPPED_UCAST, MT_MDP_TO_HIF) |
-	      FIELD_PREP(MT_MDP_RCFR1_RX_DROPPED_MCAST, MT_MDP_TO_HIF);
-	mt76_rmw(dev, MT_MDP_BNRCFR1(band), mask, set);
-
 	mt76_set(dev, MT_WF_RMAC_MIB_TIME0(band), MT_WF_RMAC_MIB_RXTIME_EN);
 	mt76_set(dev, MT_WF_RMAC_MIB_AIRTIME0(band), MT_WF_RMAC_MIB_RXTIME_EN);
 
-- 
2.25.1