[PATCH v16 3/7] soc: mediatek: SVS: introduce MTK SVS engine

Guenter Roeck linux at roeck-us.net
Wed May 5 21:51:15 PDT 2021


On Wed, Apr 28, 2021 at 02:54:36PM +0800, Roger Lu wrote:
> The Smart Voltage Scaling(SVS) engine is a piece of hardware
> which calculates suitable SVS bank voltages to OPP voltage table.
> Then, DVFS driver could apply those SVS bank voltages to PMIC/Buck
> when receiving OPP_EVENT_ADJUST_VOLTAGE.
> 
> Signed-off-by: Roger Lu <roger.lu at mediatek.com>
> ---
>  drivers/soc/mediatek/Kconfig   |   10 +
>  drivers/soc/mediatek/Makefile  |    1 +
>  drivers/soc/mediatek/mtk-svs.c | 1723 ++++++++++++++++++++++++++++++++
>  3 files changed, 1734 insertions(+)
>  create mode 100644 drivers/soc/mediatek/mtk-svs.c
> 
[ ... ]

> +
> +	svsp_irq = irq_of_parse_and_map(svsp->dev->of_node, 0);
> +	ret = devm_request_threaded_irq(svsp->dev, svsp_irq, NULL, svs_isr,
> +					svsp->irqflags, svsp->name, svsp);

0-day reports:

drivers/soc/mediatek/mtk-svs.c:1663:7-32: ERROR:
	Threaded IRQ with no primary handler requested without IRQF_ONESHOT

I would be a bit concerned about this. There is no primary (hard)
interrupt handler, meaning the hard interrupt may be re-enabled after
the default hard interrupt handler runs. This might result in endless
interrupts.

Guenter



More information about the Linux-mediatek mailing list