These two HW of wakeup don't follow MediaTek internal IPM rule,
both use a specific way, like as early revision of mt8173.
Due to the index 2 already used by many DTS, it's better to keep
it unchanged for backward compatible, treat specific ones without
following IPM rule as revision 1.x, meanwhile reserve 3~10 for
later revisions with following the IPM rule.
Signed-off-by: Chunfeng Yun <chunfeng.yun at mediatek.com>
---
.../devicetree/bindings/usb/mediatek,mtk-xhci.yaml | 10 +++++++---
1 file changed, 7 insertions(+), 3 deletions(-)
diff --git a/Documentation/devicetree/bindings/usb/mediatek,mtk-xhci.yaml b/Documentation/devicetree/bindings/usb/mediatek,mtk-xhci.yaml
index 2246d29a5e4e..f5dff7fb5755 100644
--- a/Documentation/devicetree/bindings/usb/mediatek,mtk-xhci.yaml
+++ b/Documentation/devicetree/bindings/usb/mediatek,mtk-xhci.yaml
@@ -30,6 +30,7 @@ properties:
- mediatek,mt7629-xhci
- mediatek,mt8173-xhci
- mediatek,mt8183-xhci
+ - mediatek,mt8192-xhci
- const: mediatek,mtk-xhci
reg:
@@ -131,10 +132,13 @@ properties:
- description:
The second cell represents the register base address of the glue
layer in syscon
- - description:
+ - description: |
The third cell represents the hardware version of the glue layer,
- 1 is used by mt8173 etc, 2 is used by mt2712 etc
- enum: [1, 2]
+ 1 - used by mt8173 etc, revision 1 without following IPM rule;
+ 2 - used by mt2712 etc, revision 2 following IPM rule;
+ 11 - used by mt8183, specific 1.1;
+ 12 - used by mt8192, specific 1.2;
+ enum: [1, 2, 11, 12]
mediatek,u3p-dis-msk:
$ref: /schemas/types.yaml#/definitions/uint32
--
2.18.0