[PATCH V9 03/12] soc: mediatek: add driver for dvfsrc support

Georgi Djakov georgi.djakov at linaro.org
Thu Mar 18 09:14:22 GMT 2021


Hi Henry,

On 3/2/21 05:47, Henry Chen wrote:
> Add dvfsrc driver for MT6873/MT8183/MT8192
> 
> Signed-off-by: Henry Chen <henryc.chen at mediatek.com>
> ---
>  drivers/soc/mediatek/Kconfig            |  11 +
>  drivers/soc/mediatek/Makefile           |   1 +
>  drivers/soc/mediatek/mtk-dvfsrc.c       | 421 ++++++++++++++++++++++++++++++++
>  include/linux/soc/mediatek/mtk_dvfsrc.h |  35 +++
>  4 files changed, 468 insertions(+)
>  create mode 100644 drivers/soc/mediatek/mtk-dvfsrc.c
>  create mode 100644 include/linux/soc/mediatek/mtk_dvfsrc.h
> 
> diff --git a/drivers/soc/mediatek/Kconfig b/drivers/soc/mediatek/Kconfig
> index fdd8bc0..2dcf023 100644
> --- a/drivers/soc/mediatek/Kconfig
> +++ b/drivers/soc/mediatek/Kconfig
> @@ -26,6 +26,17 @@ config MTK_DEVAPC
>  	  The violation information is logged for further analysis or
>  	  countermeasures.
>  
> +config MTK_DVFSRC
> +	tristate "MediaTek DVFSRC Support"
> +	depends on ARCH_MEDIATEK
I'm wondering whether adding COMPILE_TEST would make sense here, but it's
also fine as is.

> +	help
> +	  Say yes here to add support for the MediaTek DVFSRC (dynamic voltage
> +	  and frequency scaling resource collector) found
> +	  on different MediaTek SoCs. The DVFSRC is a proprietary
> +	  hardware which is used to collect all the requests from
> +	  system and turn into the decision of minimum Vcore voltage
> +	  and minimum DRAM frequency to fulfill those requests.
> +
>  config MTK_INFRACFG
>  	bool "MediaTek INFRACFG Support"
>  	select REGMAP
> diff --git a/drivers/soc/mediatek/Makefile b/drivers/soc/mediatek/Makefile
> index b6908db..4ead103 100644
> --- a/drivers/soc/mediatek/Makefile
> +++ b/drivers/soc/mediatek/Makefile
[..]
> +void mtk_dvfsrc_send_request(const struct device *dev, u32 cmd, u64 data)
> +{
> +	int ret, state;
> +	struct mtk_dvfsrc *dvfsrc = dev_get_drvdata(dev);
> +
> +	dev_dbg(dvfsrc->dev, "cmd: %d, data: %llu\n", cmd, data);
> +
> +	switch (cmd) {
> +	case MTK_DVFSRC_CMD_BW_REQUEST:
> +		dvfsrc->dvd->set_dram_bw(dvfsrc, data);
> +		return;
> +	case MTK_DVFSRC_CMD_PEAK_BW_REQUEST:
> +		if (dvfsrc->dvd->set_dram_peak_bw)
> +			dvfsrc->dvd->set_dram_peak_bw(dvfsrc, data);
> +		return;
> +	case MTK_DVFSRC_CMD_OPP_REQUEST:
> +		if (dvfsrc->dvd->set_opp_level)
> +			dvfsrc->dvd->set_opp_level(dvfsrc, data);
> +		break;
> +	case MTK_DVFSRC_CMD_VCORE_REQUEST:
> +		dvfsrc->dvd->set_vcore_level(dvfsrc, data);
> +		break;
> +	case MTK_DVFSRC_CMD_HRTBW_REQUEST:
> +		if (dvfsrc->dvd->set_dram_hrtbw)
> +			dvfsrc->dvd->set_dram_hrtbw(dvfsrc, data);
> +		else
> +			return;
> +		break;
> +	case MTK_DVFSRC_CMD_VSCP_REQUEST:
> +		dvfsrc->dvd->set_vscp_level(dvfsrc, data);
> +		break;
> +	default:
> +		dev_err(dvfsrc->dev, "unknown command: %d\n", cmd);
> +		return;
> +	}
> +
> +	/* DVFSRC need to wait at least 2T(~196ns) to handle request
> +	 * after recieving command

Nit: s/recieving/receiving/

Thanks,
Georgi



More information about the Linux-mediatek mailing list