[PATCH v2 06/18] usb: xhci-mtk: add a function to (un)load bandwidth info
Chunfeng Yun
chunfeng.yun at mediatek.com
Mon Mar 8 02:51:55 GMT 2021
Extract a function to load/unload bandwidth info, and remove
a dummy check of TT offset.
Signed-off-by: Chunfeng Yun <chunfeng.yun at mediatek.com>
---
v2: no changes
---
drivers/usb/host/xhci-mtk-sch.c | 37 ++++++++++++++-------------------
1 file changed, 16 insertions(+), 21 deletions(-)
diff --git a/drivers/usb/host/xhci-mtk-sch.c b/drivers/usb/host/xhci-mtk-sch.c
index b1da3cb077c9..9a9685f74940 100644
--- a/drivers/usb/host/xhci-mtk-sch.c
+++ b/drivers/usb/host/xhci-mtk-sch.c
@@ -375,7 +375,6 @@ static void update_bus_bw(struct mu3h_sch_bw_info *sch_bw,
sch_ep->bw_budget_table[j];
}
}
- sch_ep->allocated = used;
}
static int check_fs_bus_bw(struct mu3h_sch_ep_info *sch_ep, int offset)
@@ -509,6 +508,19 @@ static void update_sch_tt(struct usb_device *udev,
list_del(&sch_ep->tt_endpoint);
}
+static int load_ep_bw(struct usb_device *udev, struct mu3h_sch_bw_info *sch_bw,
+ struct mu3h_sch_ep_info *sch_ep, bool loaded)
+{
+ if (sch_ep->sch_tt)
+ update_sch_tt(udev, sch_ep, loaded);
+
+ /* update bus bandwidth info */
+ update_bus_bw(sch_bw, sch_ep, loaded);
+ sch_ep->allocated = loaded;
+
+ return 0;
+}
+
static u32 get_esit_boundary(struct mu3h_sch_ep_info *sch_ep)
{
u32 boundary = sch_ep->esit;
@@ -535,7 +547,6 @@ static int check_sch_bw(struct usb_device *udev,
u32 esit_boundary;
u32 min_num_budget;
u32 min_cs_count;
- bool tt_offset_ok = false;
int ret;
/*
@@ -552,8 +563,6 @@ static int check_sch_bw(struct usb_device *udev,
ret = check_sch_tt(udev, sch_ep, offset);
if (ret)
continue;
- else
- tt_offset_ok = true;
}
if ((offset + sch_ep->num_budget_microframes) > esit_boundary)
@@ -585,29 +594,15 @@ static int check_sch_bw(struct usb_device *udev,
sch_ep->cs_count = min_cs_count;
sch_ep->num_budget_microframes = min_num_budget;
- if (sch_ep->sch_tt) {
- /* all offset for tt is not ok*/
- if (!tt_offset_ok)
- return -ERANGE;
-
- update_sch_tt(udev, sch_ep, 1);
- }
-
- /* update bus bandwidth info */
- update_bus_bw(sch_bw, sch_ep, 1);
-
- return 0;
+ return load_ep_bw(udev, sch_bw, sch_ep, true);
}
static void destroy_sch_ep(struct usb_device *udev,
struct mu3h_sch_bw_info *sch_bw, struct mu3h_sch_ep_info *sch_ep)
{
/* only release ep bw check passed by check_sch_bw() */
- if (sch_ep->allocated) {
- update_bus_bw(sch_bw, sch_ep, 0);
- if (sch_ep->sch_tt)
- update_sch_tt(udev, sch_ep, 0);
- }
+ if (sch_ep->allocated)
+ load_ep_bw(udev, sch_bw, sch_ep, false);
if (sch_ep->sch_tt)
drop_tt(udev);
--
2.18.0
More information about the Linux-mediatek
mailing list