[PATCH 16/17] usb: common: add function to get interval expressed in us unit

Chunfeng Yun chunfeng.yun at mediatek.com
Fri Mar 5 09:02:54 GMT 2021


Add a new function to convert bInterval into the time expressed
in 1us unit.

Signed-off-by: Chunfeng Yun <chunfeng.yun at mediatek.com>
---
 drivers/usb/common/common.c | 33 +++++++++++++++++++++++++++++++++
 drivers/usb/core/devices.c  | 21 ++++-----------------
 drivers/usb/core/endpoint.c | 35 ++++-------------------------------
 include/linux/usb/ch9.h     | 11 +++++++++++
 4 files changed, 52 insertions(+), 48 deletions(-)

diff --git a/drivers/usb/common/common.c b/drivers/usb/common/common.c
index fc21cf2d36f6..5dd7e657e369 100644
--- a/drivers/usb/common/common.c
+++ b/drivers/usb/common/common.c
@@ -165,6 +165,39 @@ enum usb_dr_mode usb_get_dr_mode(struct device *dev)
 }
 EXPORT_SYMBOL_GPL(usb_get_dr_mode);
 
+unsigned int usb_decode_interval(const struct usb_endpoint_descriptor *epd,
+				 enum usb_device_speed speed)
+{
+	unsigned int interval = 0;
+
+	switch (usb_endpoint_type(epd)) {
+	case USB_ENDPOINT_XFER_CONTROL:
+		/* uframes per NAK */
+		if (speed == USB_SPEED_HIGH)
+			interval = epd->bInterval;
+		break;
+	case USB_ENDPOINT_XFER_ISOC:
+		interval = 1 << (epd->bInterval - 1);
+		break;
+	case USB_ENDPOINT_XFER_BULK:
+		/* uframes per NAK */
+		if (speed == USB_SPEED_HIGH && usb_endpoint_dir_out(epd))
+			interval = epd->bInterval;
+		break;
+	case USB_ENDPOINT_XFER_INT:
+		if (speed >= USB_SPEED_HIGH)
+			interval = 1 << (epd->bInterval - 1);
+		else
+			interval = epd->bInterval;
+		break;
+	}
+
+	interval *= (speed >= USB_SPEED_HIGH) ? 125 : 1000;
+
+	return interval;
+}
+EXPORT_SYMBOL_GPL(usb_decode_interval);
+
 #ifdef CONFIG_OF
 /**
  * of_usb_get_dr_mode_by_phy - Get dual role mode for the controller device
diff --git a/drivers/usb/core/devices.c b/drivers/usb/core/devices.c
index 1ef2de6e375a..d8b0041de612 100644
--- a/drivers/usb/core/devices.c
+++ b/drivers/usb/core/devices.c
@@ -157,38 +157,25 @@ static char *usb_dump_endpoint_descriptor(int speed, char *start, char *end,
 	switch (usb_endpoint_type(desc)) {
 	case USB_ENDPOINT_XFER_CONTROL:
 		type = "Ctrl";
-		if (speed == USB_SPEED_HIGH)	/* uframes per NAK */
-			interval = desc->bInterval;
-		else
-			interval = 0;
 		dir = 'B';			/* ctrl is bidirectional */
 		break;
 	case USB_ENDPOINT_XFER_ISOC:
 		type = "Isoc";
-		interval = 1 << (desc->bInterval - 1);
 		break;
 	case USB_ENDPOINT_XFER_BULK:
 		type = "Bulk";
-		if (speed == USB_SPEED_HIGH && dir == 'O') /* uframes per NAK */
-			interval = desc->bInterval;
-		else
-			interval = 0;
 		break;
 	case USB_ENDPOINT_XFER_INT:
 		type = "Int.";
-		if (speed == USB_SPEED_HIGH || speed >= USB_SPEED_SUPER)
-			interval = 1 << (desc->bInterval - 1);
-		else
-			interval = desc->bInterval;
 		break;
 	default:	/* "can't happen" */
 		return start;
 	}
-	interval *= (speed == USB_SPEED_HIGH ||
-		     speed >= USB_SPEED_SUPER) ? 125 : 1000;
-	if (interval % 1000)
+
+	interval = usb_decode_interval(desc, speed);
+	if (interval % 1000) {
 		unit = 'u';
-	else {
+	} else {
 		unit = 'm';
 		interval /= 1000;
 	}
diff --git a/drivers/usb/core/endpoint.c b/drivers/usb/core/endpoint.c
index 903426b6d305..a2530811cf7d 100644
--- a/drivers/usb/core/endpoint.c
+++ b/drivers/usb/core/endpoint.c
@@ -84,40 +84,13 @@ static ssize_t interval_show(struct device *dev, struct device_attribute *attr,
 			     char *buf)
 {
 	struct ep_device *ep = to_ep_device(dev);
+	unsigned int interval;
 	char unit;
-	unsigned interval = 0;
-	unsigned in;
 
-	in = (ep->desc->bEndpointAddress & USB_DIR_IN);
-
-	switch (usb_endpoint_type(ep->desc)) {
-	case USB_ENDPOINT_XFER_CONTROL:
-		if (ep->udev->speed == USB_SPEED_HIGH)
-			/* uframes per NAK */
-			interval = ep->desc->bInterval;
-		break;
-
-	case USB_ENDPOINT_XFER_ISOC:
-		interval = 1 << (ep->desc->bInterval - 1);
-		break;
-
-	case USB_ENDPOINT_XFER_BULK:
-		if (ep->udev->speed == USB_SPEED_HIGH && !in)
-			/* uframes per NAK */
-			interval = ep->desc->bInterval;
-		break;
-
-	case USB_ENDPOINT_XFER_INT:
-		if (ep->udev->speed == USB_SPEED_HIGH)
-			interval = 1 << (ep->desc->bInterval - 1);
-		else
-			interval = ep->desc->bInterval;
-		break;
-	}
-	interval *= (ep->udev->speed == USB_SPEED_HIGH) ? 125 : 1000;
-	if (interval % 1000)
+	interval = usb_decode_interval(ep->desc, ep->udev->speed);
+	if (interval % 1000) {
 		unit = 'u';
-	else {
+	} else {
 		unit = 'm';
 		interval /= 1000;
 	}
diff --git a/include/linux/usb/ch9.h b/include/linux/usb/ch9.h
index abdd310c77f0..1a6d44ae707b 100644
--- a/include/linux/usb/ch9.h
+++ b/include/linux/usb/ch9.h
@@ -90,6 +90,17 @@ extern enum usb_ssp_rate usb_get_maximum_ssp_rate(struct device *dev);
  */
 extern const char *usb_state_string(enum usb_device_state state);
 
+/**
+ * usb_decode_interval - Decode bInterval into the time expressed in 1us unit
+ * @epd: The descriptor of the endpoint
+ * @speed: The speed that the endpoint works as
+ *
+ * Function returns the interval expressed in 1us unit for servicing
+ * endpoint for data transfers.
+ */
+unsigned int usb_decode_interval(const struct usb_endpoint_descriptor *epd,
+				 enum usb_device_speed speed);
+
 #ifdef CONFIG_TRACING
 /**
  * usb_decode_ctrl - Returns human readable representation of control request.
-- 
2.18.0


More information about the Linux-mediatek mailing list